Author Archives: ep

China factory Universal Coupling 4000r/M Woodon China Connector Cardan Shaft Bearing SWC-I120b-295, SWC-I100dh-304+30, SWC-I120b-295

Product Description

Product Name	Cardan Shaft
Product Model	SWC-I75A-335+40
Main Material	35CrMo or 45# Steel
Nominal Torque	500 N.M
Normal Length	335 mm
Length Compensation	40 mm

Standard Or Nonstandard:	Nonstandard
Shaft Hole:	19-32
Torque:	>80N.M

Samples:	US$ 10/Piece 1 Piece(Min.Order) \| Order Sample

Customization:	Available \| Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost: Estimated freight per unit.	about shipping cost and estimated delivery time.

Payment Method:
	Initial Payment Full Payment

Currency:	US$

Return&refunds:	You can apply for a refund up to 30 days after receipt of the products.

cardan shaft

What factors should be considered when selecting the right cardan shaft for an application?

When selecting a cardan shaft for a specific application, several crucial factors need to be considered to ensure optimal performance and longevity. The following factors should be taken into account during the selection process:

1. Torque Requirements:

– One of the primary considerations is the torque requirements of the application. The cardan shaft should be capable of transmitting the required torque without exceeding its rated capacity. It is essential to determine the maximum torque that the shaft will experience during operation and select a cardan shaft that can handle that torque while providing an appropriate safety margin.

2. Speed and RPM:

– The rotational speed or RPM (revolutions per minute) of the application is another critical factor. Cardan shafts have specific rotational speed limits, and exceeding these limits can lead to premature wear, vibration, and failure. It is crucial to select a cardan shaft that is rated for the speed requirements of the application to ensure reliable and smooth operation.

3. Angle of Misalignment:

– The angle of misalignment between the driving and driven components should be considered. Cardan shafts can accommodate angular misalignment up to a certain degree, typically specified by the manufacturer. It is important to select a cardan shaft that can handle the anticipated misalignment angle to ensure proper power transmission and prevent excessive wear or binding.

4. Operating Conditions:

– The operating conditions of the application play a vital role in cardan shaft selection. Factors such as temperature, humidity, presence of corrosive agents, and exposure to vibration or shock need to be considered. It is crucial to select a cardan shaft that is designed to withstand the specific operating conditions to ensure durability and reliability.

5. Length and Size:

– The length and size of the cardan shaft should be chosen appropriately for the application. The length of the shaft affects its ability to absorb vibrations and accommodate misalignments. It is important to consider the available space and the required length to ensure proper fitment and functionality. Additionally, the size of the cardan shaft should be selected based on the load requirements and the available torque capacity.

6. Maintenance and Serviceability:

– Consideration should be given to the ease of maintenance and serviceability of the cardan shaft. Some applications may require regular inspection, lubrication, or replacement of certain components. It is beneficial to select a cardan shaft that allows convenient access for maintenance and incorporates features such as grease fittings or easily replaceable universal joints.

7. Cost and Budget:

– Finally, the cost and budget constraints should be taken into account. Different cardan shaft manufacturers and suppliers may offer varying prices for their products. It is important to balance the desired quality, performance, and durability of the cardan shaft with the available budget.

By carefully considering these factors, engineers and designers can select the right cardan shaft for the application, ensuring optimal performance, longevity, and reliability. Collaboration with cardan shaft manufacturers and suppliers can also provide valuable insights and assistance in making the appropriate selection based on the specific requirements of the application.

cardan shaft

What safety precautions should be followed when working with cardan shafts?

Working with cardan shafts requires adherence to certain safety precautions to prevent accidents, injuries, and damage to equipment. Whether during installation, maintenance, or repair, it is essential to follow these safety guidelines:

1. Personal Protective Equipment (PPE):

– Always wear appropriate personal protective equipment, including safety glasses, gloves, and protective clothing. PPE helps protect against potential hazards such as flying debris, sharp edges, or contact with lubricants or chemicals.

2. Training and Familiarity:

– Ensure that personnel working with cardan shafts are adequately trained and familiar with the equipment and procedures involved. They should understand the potential hazards, safe operating practices, and emergency procedures.

3. Lockout/Tagout Procedures:

– Before working on cardan shafts, follow proper lockout/tagout procedures to isolate and de-energize the equipment. This prevents accidental activation or movement of the shaft while maintenance or repair activities are being performed.

4. Secure the Equipment:

– Before starting any work on the cardan shaft, ensure that the equipment or vehicle is securely supported and immobilized. This prevents unexpected movement or rotation of the shaft, reducing the risk of entanglement or injury.

5. Ventilation:

– If working in enclosed spaces or areas with poor ventilation, ensure adequate ventilation or use appropriate respiratory protective equipment to avoid inhalation of harmful fumes, gases, or dust particles.

6. Proper Lifting Techniques:

– When handling heavy cardan shafts or components, use proper lifting techniques to avoid strains or injuries. Employ lifting equipment, such as cranes or hoists, where necessary, and ensure the load capacity is not exceeded.

7. Inspection and Maintenance:

– Regularly inspect the condition of the cardan shaft, including universal joints, slip yokes, and other components. Look for signs of wear, damage, or misalignment. Perform routine maintenance and lubrication as recommended by the manufacturer to ensure safe and efficient operation.

8. Avoid Exceeding Design Limits:

– Operate the cardan shaft within its specified design limits, including torque capacity, speed, and misalignment angles. Exceeding these limits can lead to premature wear, mechanical failure, and safety hazards.

9. Proper Disposal of Used Parts and Lubricants:

– Dispose of used parts, lubricants, and other waste materials in accordance with local regulations and environmental best practices. Follow proper disposal procedures to prevent pollution and potential harm to the environment.

10. Emergency Response:

– Be familiar with emergency response procedures, including first aid, fire prevention, and evacuation plans. Maintain access to emergency contact information and necessary safety equipment, such as fire extinguishers, in the vicinity of the work area.

It is important to note that the above safety precautions serve as general guidelines. Always refer to specific safety guidelines provided by the manufacturer of the cardan shaft or equipment for any additional precautions or recommendations.

By following these safety precautions, individuals working with cardan shafts can minimize the risks associated with their operation and ensure a safe working environment.

cardan shaft

What benefits do cardan shafts offer for different types of vehicles and equipment?

Cardan shafts, also known as propeller shafts or drive shafts, offer numerous benefits for different types of vehicles and equipment. Their versatile design and functionality make them an essential component in various applications. Here are the key benefits that cardan shafts provide for different types of vehicles and equipment:

1. Efficient Power Transmission:

– Cardan shafts ensure efficient power transmission from the engine or power source to the wheels or driven components. In vehicles, such as cars, trucks, and buses, cardan shafts transmit torque from the gearbox or transmission to the differential, enabling the wheels to rotate and propel the vehicle forward. In equipment and machinery, cardan shafts transfer rotational power from the power source, such as an engine or motor, to driven components like pumps, conveyors, or generators. By efficiently transmitting power, cardan shafts contribute to the overall performance and productivity of vehicles and equipment.

2. Flexibility and Misalignment Compensation:

– Cardan shafts offer flexibility and the ability to compensate for misalignment between the driving and driven components. This flexibility is crucial in vehicles and equipment where the engine or power source may not be directly aligned with the wheels or driven machinery. Cardan shafts incorporate universal joints at each end, allowing for angular misalignment and accommodating variations in the relative positions of the components. This feature ensures smooth power transmission, reduces stress on the drivetrain, and enhances the overall maneuverability and performance of vehicles and equipment.

3. Adaptability to Variable Configurations:

– Cardan shafts are adaptable to variable configurations and adjustable setups. In vehicles, they can accommodate changes in the wheelbase or suspension system, allowing for different vehicle sizes and configurations. For example, in trucks with multiple axles, cardan shafts can be adjusted to compensate for varying distances between the axles. In equipment and machinery, cardan shafts can be designed with telescopic sections or sliding splines, enabling length adjustment to accommodate changes in the distance between the power source and driven components. This adaptability makes cardan shafts suitable for a wide range of vehicle and equipment configurations.

4. Vibration Damping and Smooth Operation:

– Cardan shafts contribute to vibration damping and enable smooth operation in vehicles and equipment. The universal joints in cardan shafts help absorb and dampen vibrations that may arise from the power source or drivetrain. By allowing slight angular deflection and compensating for misalignment, cardan shafts reduce the transmission of vibrations to the vehicle or equipment, resulting in a smoother and more comfortable ride for passengers or operators. Additionally, the balanced design of cardan shafts minimizes vibration-induced wear and extends the lifespan of associated components.

5. Safety and Protection:

– Cardan shafts incorporate safety features to ensure the protection of both the vehicle or equipment and the operator. For example, in vehicles, cardan shafts often have shielding or guards to prevent contact with rotating components, reducing the risk of accidents or injuries. In some applications, cardan shafts may also include safety mechanisms such as shear pins or torque limiters. These features are designed to protect the shaft and other components from damage by shearing or disengaging in the event of overload or excessive torque, preventing costly repairs and downtime.

6. Suitable for Various Applications:

– Cardan shafts find applications in a wide range of vehicles and equipment across different industries. In the automotive sector, they are used in passenger cars, commercial vehicles, buses, and off-road vehicles to transmit power to the wheels. In the agricultural industry, cardan shafts connect tractors to various implements, such as mowers, balers, or tillers. In the construction and mining sectors, they are employed in machinery like excavators, loaders, and crushers to transfer power to different components. The versatility of cardan shafts makes them well-suited for various applications, providing reliable power transmission and motion.

In summary, cardan shafts offer several benefits for different types of vehicles and equipment. They ensure efficient power transmission, flexibility, and misalignment compensation, adaptability to variable configurations, vibration damping, and smooth operation. Additionally, they incorporate safety features and are suitable for a wide range of applications in automotive, agricultural, construction, and other industries. Cardan shafts play a vital role in enhancing the performance, maneuverability, and safety of vehicles and equipment, contributing to overall productivity and reliability.

China factory Universal Coupling 4000r/M Woodon China Connector Cardan Shaft Bearing SWC-I120b-295, SWC-I100dh-304+30, SWC-I120b-295
editor by CX 2023-11-18

China Hot selling Harvester Pto Drive Shaft Farm Tractor Pto Shaft and Rotary Tiller Cardan Shaft for Agricultural Machinery

Product Description

Harvester Pto Drive Shaft Farm Tractor Pto Shaft and Rotary Tiller Cardan Shaft for Agricultural Machinery

Product Description

Rotary Tiller Pto Shaft Tractor Cardan Shaft and Harvester Pto Drive Shaft for Farm Equipment

A Power Take-Off shaft (PTO shaft) is a mechanical device utilized to transmit power from a tractor or other power source to an attached implement, such as a mower, tiller, or baler. Typically situated at the rear of the tractor, the PTO shaft is driven by the tractor’s engine through the transmission.
The primary purpose of the PTO shaft is to supply a rotating power source to the implement, enabling it to carry out its intended function. To connect the implement to the PTO shaft, a universal joint is employed, allowing for movement between the tractor and the implement while maintaining a consistent power transfer.

Here is our advantages when compare to similar products from China:
1.Forged yokes make PTO shafts strong enough for usage and working;
2.Internal sizes standard to confirm installation smooth;
3.CE and ISO certificates to guarantee to quality of our goods;
4.Strong and professional package to confirm the good situation when you receive the goods.

Product Specifications

Packaging & Shipping

Company Profile

HangZhou Hanon Technology Co.,ltd is a modern enterprise specilizing in the development,production,sales and services of Agricultural Parts like PTO shaft and Gearboxes and Hydraulic parts like Cylinder , Valve ,Gearpump and motor etc..
We adhere to the principle of ” High Quality, Customers’Satisfaction”, using advanced technology and equipments to ensure all the technical standards of transmission .We follow the principle of people first , trying our best to set up a pleasant surroundings and platform of performance for each employee. So everyone can be self-consciously active to join Hanon Machinery.

FAQ

1.WHAT’S THE PAYMENT TERM?

When we quote for you,we will confirm with you the way of transaction,FOB,CIFetc.<br> For mass production goods, you need to pay 30% deposit before producing and70% balance against copy of documents.The most common way is by T/T.

2.HOW TO DELIVER THE GOODS TO US?

Usually we will ship the goods to you by sea.

3.HOW LONG IS YOUR DELIVERY TIME AND SHIPMENT?

30-45days

Type:	Pto Shaft
Usage:	Agricultural Products Processing, Tillage, Harvester, Planting and Fertilization, Grain Threshing, Cleaning and Drying, Tillage, Harvester, Planting and Fertilization
Material:	45cr Steel

Samples:	US$ 20/Piece 1 Piece(Min.Order) \| Order Sample

Customization:	Available \| Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost: Estimated freight per unit.	about shipping cost and estimated delivery time.

Payment Method:
	Initial Payment Full Payment

Currency:	US$

Return&refunds:	You can apply for a refund up to 30 days after receipt of the products.

cardan shaft

How do cardan shafts ensure efficient power transfer while maintaining balance?

Cardan shafts are designed to ensure efficient power transfer while maintaining balance between the driving and driven components. They employ various mechanisms and features that contribute to both aspects. Let’s explore how cardan shafts achieve efficient power transfer and balance:

1. Universal Joints:

– Cardan shafts utilize universal joints, also known as U-joints, to transmit torque from the driving component to the driven component. Universal joints consist of a cross-shaped yoke with needle bearings at each end. These needle bearings allow the joints to pivot and accommodate angular misalignment between the driving and driven components. By allowing for flexibility in movement, universal joints ensure efficient power transfer even when the components are not perfectly aligned, minimizing energy losses and maintaining balance.

2. Misalignment Compensation:

– Cardan shafts are designed to compensate for misalignment between the driving and driven components. The universal joints, along with slip yokes and telescopic sections, allow the shaft to adjust its length and accommodate variations in alignment. This misalignment compensation capability ensures that the cardan shaft can transmit power smoothly and efficiently, reducing stress on the components and maintaining balance during operation.

3. Balanced Design:

– Cardan shafts are engineered with a balanced design to minimize vibration and maintain smooth operation. The shaft tubes are typically symmetrically constructed, and the universal joints are positioned to distribute the mass evenly. This balanced design helps to reduce vibration and minimize the occurrence of unbalanced forces that can negatively impact power transfer and overall system performance. By maintaining balance, cardan shafts contribute to efficient power transmission and improve the lifespan of the components involved.

4. High-Quality Materials and Manufacturing:

– The materials used in the construction of cardan shafts, such as steel or aluminum alloy, are carefully selected for their strength, durability, and ability to maintain balance. High-quality materials ensure that the shafts can withstand the torque and operational stresses without deformation or failure, promoting efficient power transfer. Additionally, precise manufacturing processes and quality control measures are employed to ensure that the cardan shafts are accurately balanced during production, further enhancing their efficiency and balance.

5. Regular Maintenance and Inspection:

– To ensure continued efficient power transfer and balance, regular maintenance and inspection of cardan shafts are essential. This includes periodic lubrication of the universal joints, checking for wear or damage, and addressing any misalignment issues. Regular maintenance helps to preserve the balance of the shaft and ensures optimal performance and longevity.

Overall, cardan shafts ensure efficient power transfer while maintaining balance through the use of universal joints for torque transmission, misalignment compensation mechanisms, balanced design, high-quality materials, and regular maintenance. By incorporating these features, cardan shafts contribute to the smooth operation, reliability, and longevity of various applications in automotive, industrial, and other sectors that rely on efficient power transmission.

cardan shaft

How do cardan shafts handle variations in load, speed, and misalignment during operation?

Cardan shafts are designed to handle variations in load, speed, and misalignment during operation. They incorporate specific features and mechanisms to accommodate these factors and ensure efficient power transmission. Let’s explore how cardan shafts handle these variations:

1. Load Variation:

– Cardan shafts are designed to transmit torque and handle variations in load. The torque capacity of the shaft is determined based on the application’s requirements, and the shaft is manufactured using materials and dimensions that can withstand the specified loads. The design and construction of the shaft, including the selection of universal joints and slip yokes, are optimized to handle the anticipated loads. By choosing appropriate material strengths and dimensions, cardan shafts can effectively transmit varying loads without failure or excessive deflection.

2. Speed Variation:

– Cardan shafts can accommodate variations in rotational speed between the driving and driven components. The universal joints, which connect the shaft’s segments, allow for angular movement, thereby compensating for speed differences. The design of the universal joints and the use of needle bearings or roller bearings enable smooth rotation and efficient power transmission even at varying speeds. However, it’s important to note that excessively high speeds can introduce additional challenges such as increased vibration and wear, which may require additional measures such as balancing and lubrication.

3. Misalignment Compensation:

– Cardan shafts are specifically designed to handle misalignment between the driving and driven components. They can accommodate angular misalignment, parallel offset, and axial displacement to a certain extent. The universal joints in the shaft assembly allow for flexibility and articulation, enabling the shaft to transmit torque even when the components are not perfectly aligned. The design of the universal joints, along with their bearing arrangements and seals, allows for smooth rotation and compensation of misalignment. Manufacturers specify the maximum allowable misalignment angles and displacements for cardan shafts, and exceeding these limits can lead to increased wear, vibration, and reduced efficiency.

4. Telescopic Design:

– Cardan shafts often feature a telescopic design, which allows for axial movement and adjustment to accommodate variations in distance between the driving and driven components. This telescopic design enables the shaft to handle changes in length during operation, such as when the vehicle or equipment undergoes suspension movement or when the drivetrain components experience positional changes. The telescopic mechanism ensures that the shaft remains properly connected and engaged, maintaining power transmission efficiency even when there are fluctuations in distance or position.

5. Regular Maintenance:

– To ensure optimal performance and longevity, cardan shafts require regular maintenance. This includes inspections, lubrication of universal joints and slip yokes, and monitoring for wear or damage. Regular maintenance helps identify and address any issues related to load, speed, or misalignment variations, ensuring that the shaft continues to function effectively under changing operating conditions.

Overall, cardan shafts handle variations in load, speed, and misalignment through their design features such as universal joints, telescopic design, and flexibility. By incorporating these elements, along with proper material selection, lubrication, and maintenance practices, cardan shafts can reliably transmit torque and accommodate the changing operating conditions in vehicles and equipment.

cardan shaft

Which industries and vehicles commonly use cardan shafts for power distribution?

Cardan shafts, also known as propeller shafts or drive shafts, are widely used in various industries and vehicles for efficient power distribution. Their versatility and ability to transmit torque between non-aligned components make them essential in numerous applications. Here are some of the industries and vehicles that commonly utilize cardan shafts:

1. Automotive Industry:

– Cardan shafts have extensive use in the automotive industry. They are found in passenger cars, commercial vehicles, trucks, buses, and off-road vehicles. In these vehicles, cardan shafts transmit torque from the gearbox or transmission to the differential, which then distributes the power to the wheels. This allows the wheels to rotate and propel the vehicle forward. Cardan shafts in the automotive industry are designed to handle high torque loads and provide smooth power delivery, contributing to the overall performance and drivability of the vehicles.

2. Agriculture and Farming:

– The agriculture and farming sector extensively relies on cardan shafts for power distribution. They are commonly used in tractors and other agricultural machinery to transfer power from the engine to various implements and attachments, such as mowers, balers, tillers, and harvesters. Cardan shafts in agricultural applications enable efficient power delivery to the implements, allowing farmers to perform tasks like cutting crops, baling hay, tilling soil, and harvesting with ease and productivity.

3. Construction and Mining:

– The construction and mining industries utilize cardan shafts in a wide range of machinery and equipment. Excavators, loaders, bulldozers, and crushers are examples of machinery that employ cardan shafts to transmit power to different components. In these applications, cardan shafts ensure efficient power distribution from the engine or motor to the drivetrain or specific attachments, enabling the machinery to perform tasks like digging, material handling, and crushing with the required power and precision.

4. Industrial Equipment and Machinery:

– Various industrial equipment and machinery rely on cardan shafts for power transmission. They are used in pumps, compressors, generators, conveyors, mixers, and other industrial machines. Cardan shafts in industrial applications transmit rotational power from the motor or engine to the driven components, enabling the machinery to perform their specific functions. The flexibility and misalignment compensation provided by cardan shafts are particularly valuable in industrial settings where the power source and driven components may not be perfectly aligned.

5. Marine and Shipbuilding:

– The marine and shipbuilding industry also utilizes cardan shafts for power distribution. They are commonly found in propulsion systems of boats and ships. Cardan shafts in marine applications connect the engine or motor to the propeller, ensuring efficient transmission of rotational power and enabling the vessel to navigate through water. The ability of cardan shafts to compensate for misalignment and accommodate variations in the shaft angle is crucial in marine applications, where the propeller shaft may not be in a direct alignment with the engine.

6. Rail and Locomotives:

– Rail and locomotive systems employ cardan shafts for power distribution. They are crucial components in the drivetrain of locomotives and trains, enabling the transmission of torque from the engine or motor to the wheels or axles. Cardan shafts in rail applications ensure efficient power delivery, allowing locomotives and trains to transport passengers and goods with the required speed and traction.

In summary, cardan shafts are widely used in various industries and vehicles for power distribution. They are commonly found in the automotive industry, agriculture and farming, construction and mining machinery, industrial equipment, marine and shipbuilding applications, as well as rail and locomotive systems. The versatility, flexibility, and efficient power transmission provided by cardan shafts make them indispensable components in these industries and vehicles, contributing to their performance, productivity, and reliability.

China Hot selling Harvester Pto Drive Shaft Farm Tractor Pto Shaft and Rotary Tiller Cardan Shaft for Agricultural Machinery
editor by CX 2023-11-18

China high quality OEM ODM Cardan Transmission Tractor Parts Pto Drive Shaft for Agriculture Machinery

Product Description

OEM ODM Pto Drive Cardan Transmission Shaft Tractor Parts for Agriculture Machinery with Ce Certificate

1. Tubes or Pipes
We’ve already got Triangular profile tube and Lemon profile tube for all the series we provide.
And we have some star tube, splined tube and other profile tubes required by our customers (for a certain series). (Please notice that our catalog doesnt contain all the items we produce)
If you want tubes other than triangular or lemon, please provide drawings or pictures.

2.End yokes
We’ve got several types of quick release yokes and plain bore yoke. I will suggest the usual type for your reference.
You can also send drawings or pictures to us if you cannot find your item in our catalog.

3. Safety devices or clutches
I will attach the details of safety devices for your reference. We’ve already have Free wheel (RA), Ratchet torque limiter(SA), Shear bolt torque limiter(SB), 3types of friction torque limiter (FF,FFS,FCS) and overrunning couplers(adapters) (FAS).

4.For any other more special requirements with plastic guard, connection method, color of painting, package, etc., please feel free to let me know.

Features:
1. We have been specialized in designing, manufacturing drive shaft, steering coupler shaft, universal joints, which have exported to the USA, Europe, Australia etc for years
2. Application to all kinds of general mechanical situation
3. Our products are of high intensity and rigidity.
4. Heat resistant & Acid resistant
5. OEM orders are welcomed

Our factory is a leading manufacturer of PTO shaft yoke and universal joint.

We manufacture high quality PTO yokes for various vehicles, construction machinery and equipment. All products are constructed with rotating lighter.

We are currently exporting our products throughout the world, especially to North America, South America, Europe, and Russia. If you are interested in any item, please do not hesitate to contact us. We are looking CHINAMFG to becoming your suppliers in the near future.
FAQ:
Q1: Are you trading company or manufacturer ?
A: We are factory.

Q2: How long is your delivery time and shipment?
1.Sample Lead-times: generally 10 workdays.
2.Production Lead-times: 20-40 workdays after getting your deposit.

Q3. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery.

Q4: What is your advantages?
1. Manufacturer,the most competitive price and good quality.
2. Perfect technical engineers give you the best support.
3. OEM is available.
4. Rich stock and quick delivery.

Q5. If you can’t find the product on our website,what do you next?
Please send us inquiry with product pictures and drawings by email or other ways and we’ll check.

Type:	Fork
Usage:	Agricultural Products Processing, Farmland Infrastructure, Tillage, Harvester, Planting and Fertilization, Grain Threshing, Cleaning and Drying
Material:	Carbon Steel
Power Source:	Pto Shaft Tube
Transport Package:	Standard Sea Worthy Package
Specification:	ISO

Customization:	Available \| Customized Request

cardan shaft

What factors should be considered when selecting the right cardan shaft for an application?

1. Torque Requirements:

2. Speed and RPM:

3. Angle of Misalignment:

4. Operating Conditions:

5. Length and Size:

6. Maintenance and Serviceability:

7. Cost and Budget:

cardan shaft

How do cardan shafts contribute to the efficiency of vehicle propulsion and power distribution?

Cardan shafts play a crucial role in the efficiency of vehicle propulsion and power distribution. They enable the transfer of torque from the engine to the wheels, allowing for effective power transmission and optimized performance. Here’s how cardan shafts contribute to the efficiency of vehicle propulsion and power distribution:

1. Torque Transmission:

– Cardan shafts are responsible for transmitting torque from the engine or power source to the wheels. By efficiently transferring rotational force, they enable propulsion and movement of the vehicle. The design and construction of the cardan shaft ensure minimal power loss during torque transmission, contributing to the overall efficiency of the propulsion system.

2. Power Distribution:

– In vehicles with multiple axles or wheels, cardan shafts distribute power to each axle or wheel, ensuring balanced power delivery. This allows for improved traction, stability, and control, especially in situations such as acceleration, cornering, or off-road driving. By evenly distributing power, cardan shafts optimize the utilization of the available engine power and contribute to the overall efficiency of the vehicle.

3. Flexibility and Misalignment Compensation:

– Cardan shafts offer flexibility and the ability to accommodate misalignment between the engine, drivetrain, and wheels. They can handle angular misalignment, parallel offset, and axial displacement, allowing for smooth power transmission even when the components are not perfectly aligned. This flexibility helps reduce mechanical stresses and energy losses caused by misalignment, thus improving the efficiency of power transfer.

4. Vibration Damping:

– Cardan shafts can help dampen vibrations transmitted from the engine or other drivetrain components. The universal joints in the shaft assembly allow for slight angular movement, which helps absorb and dampen vibrations generated during operation. By reducing vibrations, cardan shafts contribute to a smoother and more efficient power distribution, enhancing overall vehicle performance and comfort.

5. Weight Reduction:

– Cardan shafts, when compared to alternative drivetrain systems such as chain or belt drives, can contribute to weight reduction in vehicles. The use of lightweight materials and optimized designs helps reduce the overall weight of the propulsion system. Reduced weight improves fuel efficiency, as less energy is required to propel the vehicle. Cardan shafts’ compactness and space-saving design also allow for more efficient packaging of the drivetrain components.

6. Durability and Reliability:

– Cardan shafts are designed to withstand the demands of vehicle propulsion and power distribution over extended periods. They are engineered using durable materials and undergo rigorous testing to ensure reliability and longevity. By providing a robust and dependable power transmission solution, cardan shafts contribute to the overall efficiency of the propulsion system by minimizing downtime and maintenance requirements.

Overall, cardan shafts contribute to the efficiency of vehicle propulsion and power distribution by effectively transmitting torque, balancing power distribution, compensating for misalignment, dampening vibrations, reducing weight, and ensuring durability and reliability. Their role in optimizing power transfer and enhancing overall vehicle performance makes cardan shafts an integral component of efficient propulsion systems.

cardan shaft

What is a cardan shaft and how does it function in vehicles and machinery?

A cardan shaft, also known as a propeller shaft or drive shaft, is a mechanical component used in vehicles and machinery to transmit torque and rotational power between two points that are not in line with each other. It consists of a tubular shaft with universal joints at each end, allowing for flexibility and accommodating misalignment between the driving and driven components. The cardan shaft plays a crucial role in transferring power from the engine or power source to the wheels or driven machinery. Here’s how it functions in vehicles and machinery:

1. Torque Transmission:

– In vehicles, the cardan shaft connects the transmission or gearbox to the differential, which then distributes torque to the wheels. When the engine generates rotational power, it is transmitted through the transmission to the cardan shaft. The universal joints at each end of the shaft allow for angular misalignment and compensate for variations in the suspension, axle movement, and road conditions. As the cardan shaft rotates, it transfers torque from the transmission to the differential, enabling power delivery to the wheels.

– In machinery, the cardan shaft serves a similar purpose of transmitting torque between the power source and driven components. For example, in agricultural equipment, the cardan shaft connects the tractor’s PTO (Power Take-Off) to various implements such as mowers, balers, or tillers. The rotational power from the tractor’s engine is transferred through the PTO driveline to the cardan shaft, which then transmits the torque to the driven machinery, enabling their operation.

2. Flexibility and Compensation:

– The cardan shaft’s design with universal joints provides flexibility and compensates for misalignment between the driving and driven components. The universal joints allow the shaft to bend and articulate while maintaining a continuous torque transmission. This flexibility is essential in vehicles and machinery where the driving and driven components may be at different angles or positions due to suspension movement, axle articulation, or uneven terrain. The cardan shaft absorbs these variations and ensures smooth power delivery without causing excessive stress or vibration.

3. Balancing and Vibration Control:

– Cardan shafts also contribute to balancing and vibration control in vehicles and machinery. The rotation of the shaft generates centrifugal forces, and any imbalance can result in vibration and reduced performance. To counterbalance this, cardan shafts are carefully designed and balanced to minimize vibration and provide smooth operation. Additionally, the universal joints help in absorbing minor vibrations and reducing their transmission to the vehicle or machinery.

4. Length Adjustment:

– Cardan shafts offer the advantage of adjustable length, allowing for variations in the distance between the driving and driven components. This adjustability is particularly useful in vehicles and machinery with adjustable wheelbases or variable attachment points. By adjusting the length of the cardan shaft, the driveline can be appropriately sized and positioned to accommodate different configurations, ensuring optimal power transmission efficiency.

5. Safety Features:

– Cardan shafts in vehicles and machinery often incorporate safety features to protect against mechanical failures. These may include shielding or guards to prevent contact with rotating components, such as the driveshaft or universal joints. In the event of a joint failure or excessive force, some cardan shafts may also incorporate shear pins or torque limiters to prevent damage to the driveline and protect other components from excessive loads.

In summary, a cardan shaft is a tubular component with universal joints at each end used to transmit torque and rotational power between non-aligned driving and driven components. It provides flexibility, compensates for misalignment, and enables torque transmission in vehicles and machinery. By efficiently transferring power, accommodating variations, and balancing vibrations, cardan shafts play a critical role in ensuring smooth and reliable operation in a wide range of applications.

China high quality OEM ODM Cardan Transmission Tractor Parts Pto Drive Shaft for Agriculture Machinery
editor by CX 2023-11-18

China Custom Cardan Shaft/Connecting Shaft for Roughing Mill

Product Description

Cardan shaft/connecting shaft for roughing mill

We can supply all the spare parts/accessories which are used in steel plants, such as bearing block, guide, roller, bearings, cardan shaft, joint cross, water proof ring etc. Please contact us if you are interested.

We have been in steel industry for more than 20years, we also have rich export experience and well understood oversea market, good quality and responsible service is our lifeline, so choose us as your supplier will be your good choice.

Material:	Alloy Steel
Load:	Drive Shaft
Stiffness & Flexibility:	Flexible Shaft

Customization:	Available \| Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost: Estimated freight per unit.	about shipping cost and estimated delivery time.

Payment Method:
	Initial Payment Full Payment

Currency:	US$

Return&refunds:	You can apply for a refund up to 30 days after receipt of the products.

cardan shaft

Can cardan shafts be adapted for use in both automotive and industrial settings?

Yes, cardan shafts can be adapted for use in both automotive and industrial settings. They are versatile components that offer efficient power transmission and can be customized to meet the specific requirements of various applications. Let’s explore how cardan shafts can be adapted for both automotive and industrial settings:

1. Automotive Applications:

– Cardan shafts have long been used in automotive applications, especially in vehicles with rear-wheel drive or all-wheel drive systems. They are commonly found in cars, trucks, SUVs, and commercial vehicles. In the automotive sector, cardan shafts are primarily used to transmit torque from the engine or transmission to the differential or axle, allowing power to be distributed to the wheels. They provide a reliable and efficient means of transferring power, even in vehicles that experience varying loads, vibration, and misalignment. Cardan shafts in automotive applications are typically designed to handle specific torque and speed requirements, taking into account factors such as vehicle weight, horsepower, and intended use.

2. Industrial Applications:

– Cardan shafts are also widely used in various industrial settings where torque needs to be transmitted between two rotating components. They are employed in a diverse range of industries, including manufacturing, mining, agriculture, construction, and more. In industrial applications, cardan shafts are utilized in machinery, equipment, and systems that require efficient power transmission over long distances or in situations where angular misalignment is present. Industrial cardan shafts can be customized to accommodate specific torque, speed, and misalignment requirements, considering factors such as the load, rotational speed, operating conditions, and space constraints. They are commonly used in applications such as conveyors, pumps, generators, mixers, crushers, and other industrial machinery.

3. Customization and Adaptability:

– Cardan shafts can be adapted for various automotive and industrial applications through customization. Manufacturers offer a range of cardan shaft options with different lengths, sizes, torque capacities, and speed ratings to suit specific requirements. Universal joints, slip yokes, telescopic sections, and other components can be selected or designed to meet the demands of different settings. Additionally, cardan shafts can be made from different materials, such as steel or aluminum alloy, depending on the application’s needs for strength, durability, or weight reduction. By collaborating with cardan shaft manufacturers and suppliers, automotive and industrial engineers can adapt these components to their specific settings, ensuring optimal performance and reliability.

4. Consideration of Application-Specific Factors:

– When adapting cardan shafts for automotive or industrial settings, it is crucial to consider application-specific factors. These factors may include torque requirements, speed limits, operating conditions (temperature, humidity, etc.), space limitations, and the need for maintenance and serviceability. By carefully evaluating these factors and collaborating with experts, engineers can select or design cardan shafts that meet the unique demands of the automotive or industrial application.

In summary, cardan shafts can be adapted and customized for use in both automotive and industrial settings. Their versatility, efficient power transmission capabilities, and ability to accommodate misalignment make them suitable for a wide range of applications. By considering the specific requirements and collaborating with cardan shaft manufacturers, engineers can ensure that these components provide reliable and efficient power transfer in automotive and industrial systems.

cardan shaft

How do cardan shafts enhance the performance of trucks and heavy-duty vehicles?

Cardan shafts play a significant role in enhancing the performance of trucks and heavy-duty vehicles. These vehicles often operate under demanding conditions, requiring robust and efficient power transmission systems. Here’s how cardan shafts contribute to the performance of trucks and heavy-duty vehicles:

1. Torque Transmission:

– Cardan shafts enable the efficient transmission of torque from the engine or transmission to the drivetrain and wheels of trucks and heavy-duty vehicles. They can handle high torque loads, ensuring that power is effectively transferred to propel the vehicle forward. This efficient torque transmission enhances acceleration, towing capacity, and overall performance.

2. Power Distribution:

– Trucks and heavy-duty vehicles often have multiple axles or wheels. Cardan shafts distribute power to each axle or wheel, ensuring balanced power delivery. This helps improve traction, stability, and control, especially when carrying heavy loads or operating on challenging terrains. By optimizing power distribution, cardan shafts enhance the vehicle’s performance and handling characteristics.

3. Flexibility and Misalignment Compensation:

– Cardan shafts are designed to accommodate misalignment between the engine, transmission, and drivetrain components. They can handle angular misalignment, parallel offset, and axial displacement. This flexibility allows for smooth power transmission even when the components are not perfectly aligned, reducing stress on the drivetrain and improving performance. It also helps absorb vibrations and shocks, enhancing driver comfort and reducing wear on other vehicle components.

4. Durability and Reliability:

– Heavy-duty vehicles operate in rugged and demanding conditions, such as construction sites, mining operations, or long-haul transportation. Cardan shafts are built to withstand these harsh environments, providing durability and reliability. They are designed using robust materials and undergo rigorous testing to ensure they can handle the high torque, heavy loads, and continuous operation that trucks and heavy-duty vehicles require. This reliability minimizes downtime and maintenance, improving overall vehicle performance.

5. Powertrain Efficiency:

– Cardan shafts help optimize powertrain efficiency in trucks and heavy-duty vehicles. By efficiently transmitting torque and minimizing power loss during power transfer, they contribute to improved fuel economy and reduced energy consumption. This increased efficiency translates to cost savings and reduced environmental impact.

6. Weight Reduction:

– Cardan shafts offer weight reduction benefits for trucks and heavy-duty vehicles. The use of lightweight materials and optimized designs helps reduce the overall weight of the propulsion system. Reduced weight improves fuel efficiency, increases payload capacity, and enhances vehicle maneuverability. Cardan shafts’ compactness and space-saving design also allow for more efficient packaging of the drivetrain components.

7. Adaptability to Various Configurations:

– Trucks and heavy-duty vehicles come in different configurations, such as rear-wheel drive (RWD), front-wheel drive (FWD), or all-wheel drive (AWD). Cardan shafts can be tailored to suit these various drivetrain setups, providing the necessary torque transmission and power distribution for each configuration. This adaptability allows manufacturers to optimize vehicle performance based on specific application requirements.

Overall, cardan shafts enhance the performance of trucks and heavy-duty vehicles by enabling efficient torque transmission, balancing power distribution, compensating for misalignment, providing durability and reliability, optimizing powertrain efficiency, reducing weight, and adapting to various drivetrain configurations. Their role in improving acceleration, towing capacity, traction, and fuel economy contributes to the overall performance and success of these vehicles in demanding environments.

cardan shaft

Can you explain the components and structure of a cardan shaft system?

A cardan shaft system, also known as a propeller shaft or drive shaft, consists of several components that work together to transmit torque and rotational power between non-aligned components. The structure of a cardan shaft system typically includes the following components:

1. Shaft Tubes:

– The shaft tubes are the main structural elements of a cardan shaft system. They are cylindrical tubes made of durable and high-strength materials such as steel or aluminum alloy. The shaft tubes provide the backbone of the system and are responsible for transmitting torque and rotational power. They are designed to withstand high loads and torsional forces without deformation or failure.

2. Universal Joints:

– Universal joints, also known as U-joints or Cardan joints, are crucial components of a cardan shaft system. They are used to connect and articulate the shaft tubes, allowing for angular misalignment between the driving and driven components. Universal joints consist of a cross-shaped yoke with needle bearings at each end. The yoke connects the shaft tubes, while the needle bearings enable the rotational motion and flexibility required for misalignment compensation. Universal joints allow the cardan shaft system to transmit torque even when the driving and driven components are not perfectly aligned.

3. Slip Yokes:

– Slip yokes are components used in cardan shaft systems that can accommodate axial misalignment. They are typically located at one or both ends of the shaft tubes and provide a sliding connection between the shaft and the driving or driven component. Slip yokes allow the shaft to adjust its length and compensate for changes in the distance between the components. This feature is particularly useful in applications where the distance between the driving and driven components can vary, such as vehicles with adjustable wheelbases or machinery with variable attachment points.

4. Flanges and Yokes:

– Flanges and yokes are used to connect the cardan shaft system to the driving and driven components. Flanges are typically bolted or welded to the ends of the shaft tubes and provide a secure connection point. They have a flange face with bolt holes that align with the corresponding flange on the driving or driven component. Yokes, on the other hand, are cross-shaped components that connect the universal joints to the flanges. They have holes or grooves that accommodate the needle bearings of the universal joints, allowing for rotational motion and torque transfer.

5. Balancing Weights:

– Balancing weights are used to balance the cardan shaft system and minimize vibrations. As the shaft rotates, imbalances in the mass distribution can lead to vibrations, noise, and reduced performance. Balancing weights are strategically placed along the shaft tubes to counterbalance these imbalances. They redistribute the mass, ensuring that the rotational components of the cardan shaft system are properly balanced. Proper balancing improves stability, reduces wear on bearings and other components, and enhances the overall performance and lifespan of the shaft system.

6. Safety Features:

– Some cardan shaft systems incorporate safety features to protect against mechanical failures. For example, protective guards or shielding may be installed to prevent contact with rotating components, reducing the risk of accidents or injuries. In applications where excessive forces or torques can occur, cardan shaft systems may include safety mechanisms such as shear pins or torque limiters. These features are designed to protect the shaft and other components from damage by shearing or disengaging in case of overload or excessive torque.

In summary, a cardan shaft system consists of shaft tubes, universal joints, slip yokes, flanges, and yokes, as well as balancing weights and safety features. These components work together to transmit torque and rotational power between non-aligned components, allowing for angular and axial misalignment compensation. The structure and components of a cardan shaft system are carefully designed to ensure efficient power transmission, flexibility, durability, and safety in various applications.

China Custom Cardan Shaft/Connecting Shaft for Roughing Mill
editor by CX 2023-11-17

China Standard Wide Angle Pto Shafts Cardan Tractor Tractor Drive Nylon Sheets Manual Driven Clutch Friction Telescopic Tube Gearbox for Tiller Agricultural Pto Shaft

Product Description

wide angle pto shafts cardan tractor tractor drive nylon sheets manual driven clutch friction telescopic tube gearbox for tiller agricultural pto shaft

Application of wide angle pto shafts

A wide angle PTO shaft is a type of drive shaft that is used to transmit power from a power source, such as a tractor, to an implement, such as a baler or mower. Wide angle PTO shafts are designed to accommodate a wide range of misalignment between the power source and the implement. This makes them ideal for use in applications where the power source and the implement are not located in the same plane, such as in agricultural equipment.

Wide angle PTO shafts are available in a variety of lengths and configurations. The length of the shaft is determined by the distance between the power source and the implement. The configuration of the shaft is determined by the type of power source and the type of implement.

Wide angle PTO shafts are a valuable component in many agricultural applications. They allow farmers to use a variety of implements with a single tractor. This can save farmers time and money.

Here are some of the benefits of using a wide angle PTO shaft:

Accommodates a wide range of misalignment: Wide angle PTO shafts are designed to accommodate a wide range of misalignment between the power source and the implement. This makes them ideal for use in applications where the power source and the implement are not located in the same plane, such as in agricultural equipment.
Increased efficiency: Wide angle PTO shafts can help increase agricultural equipment’s efficiency. This is because they allow the power source to transfer power to the implement more effectively.
Reduced wear and tear: Wide angle PTO shafts can help to reduce wear and tear on the power source and the implement. This is because they allow the power source and the implement to operate more smoothly.
Increased safety: Wide angle PTO shafts can help to increase the safety of agricultural equipment. This is because they help to prevent the power source and the implement from coming into contact with each other, which can lead to injuries.

Wide angle PTO shafts are a valuable component in many agricultural applications. They allow farmers to use a variety of implements with a single tractor. This can save farmers time and money. Wide angle PTO shafts can also help to increase the efficiency, reduce wear and tear, and increase the safety of agricultural equipment.

Material:	Carbon Steel
Load:	Drive Shaft
Stiffness & Flexibility:	Stiffness / Rigid Axle
Journal Diameter Dimensional Accuracy:	IT6-IT9
Axis Shape:	Straight Shaft
Shaft Shape:	Real Axis

Samples:	US$ 9999/Piece 1 Piece(Min.Order) \| Request Sample

cardan shaft

How do cardan shafts ensure efficient power transfer while maintaining balance?

1. Universal Joints:

2. Misalignment Compensation:

3. Balanced Design:

4. High-Quality Materials and Manufacturing:

5. Regular Maintenance and Inspection:

cardan shaft

What safety precautions should be followed when working with cardan shafts?

1. Personal Protective Equipment (PPE):

2. Training and Familiarity:

3. Lockout/Tagout Procedures:

4. Secure the Equipment:

5. Ventilation:

6. Proper Lifting Techniques:

7. Inspection and Maintenance:

8. Avoid Exceeding Design Limits:

9. Proper Disposal of Used Parts and Lubricants:

10. Emergency Response:

By following these safety precautions, individuals working with cardan shafts can minimize the risks associated with their operation and ensure a safe working environment.

cardan shaft

What benefits do cardan shafts offer for different types of vehicles and equipment?

1. Efficient Power Transmission:

2. Flexibility and Misalignment Compensation:

3. Adaptability to Variable Configurations:

4. Vibration Damping and Smooth Operation:

5. Safety and Protection:

6. Suitable for Various Applications:

China Standard Wide Angle Pto Shafts Cardan Tractor Tractor Drive Nylon Sheets Manual Driven Clutch Friction Telescopic Tube Gearbox for Tiller Agricultural Pto Shaft
editor by CX 2023-11-17

China Good quality 65-9450 Front Drive Shaft for CZPT Explorer 1997-2001 65-9294 Prop Propeller Cardan Shaft

Product Description

PROPELLER SHAFT manufacturer & supplier – CHINAMFG is your best choice

Product Name	Front Prop Drive Shaft Assembly For CHINAMFG Explorer 97-01, Mountaineer V8 5.0L 4WD
Part Number	65-9450, 65-9294, F77A4A376CB, 936-325, XL2Z4A376BB
Vehicle Fitment	For CHINAMFG EXPLORER 1997-2001 For MERCURY MOUNTAINEER 1997-1998
Compressed Length	28.46″
MOQ	1pc if we have them in stock
Delivery time	1-7 days for stock items, 25 days for production items
Note	Have stock in China and US!

For FORD Propeller Shaft, we have over 100 items, such as:

OE NO.	APPLICATION	OE NO.	APPLICATION
65-9152	For CHINAMFG CHINAMFG 1966-1970	7L3Z 4R602-J	For CHINAMFG F-150 2004-2008
65-9153	For CHINAMFG CHINAMFG 1966-1977	4L34-4K145-RE	For CHINAMFG F-150 2004-2009
65-9148	For CHINAMFG F-250 1977-1979	4L34-4K145-RA	For CHINAMFG Lobo 2004-2571
65-9170	For CHINAMFG CHINAMFG 1978	6F9Z4R602A	For CHINAMFG Five Hundred 05-07
65-9164	For CHINAMFG CHINAMFG 1979	5F9Z4R602AA	For CHINAMFG Freestyle 2005-2007
65-9166	For CHINAMFG CHINAMFG 1979	6F924R602-A	For CHINAMFG Five Hundred 05-07
65-9161	For CHINAMFG CHINAMFG 1979	5F934K145AE	For CHINAMFG Freestyle 2005-2007
65-9158	For CHINAMFG F-150 1979	936-812	For CHINAMFG Mustang 2005-2008
65-9160	For CHINAMFG CHINAMFG 1980-1982	8L3Z4R602H	For CHINAMFG F-150 2006-2008
65-9832	For CHINAMFG CHINAMFG 1983-1984	936-807	For CHINAMFG F-150 2006-2008
65-9830	For CHINAMFG Ranger 1983-1985	8L3Z4R602B	For CHINAMFG LOBO 2006-2008
65-9831	For CHINAMFG Ranger 1983-1985	7L3Z4R602K	For CHINAMFG F-150 2006-2008
65-9821	For CHINAMFG CHINAMFG II 1984-1990	CN4C154K357AD	For CHINAMFG Transit 2006-2014
65-9822	For CHINAMFG CHINAMFG II 1984-1990	7T434K357AC	For CHINAMFG Edge 2007-2008
65-9430	For CHINAMFG CHINAMFG 1985-1986	6L2Z4A376B	For CHINAMFG Expedition 2007-2009
65-9423	For CHINAMFG Ranger 1985-1988	7T4Z4R602A	For CHINAMFG Edge 2007-2013
65-9431	For CHINAMFG CHINAMFG 1985-1989	936-847	For CHINAMFG TAURUS X 2008-2009
65-9721	For CHINAMFG F-350 1985-1994	8L8Z4R602C	For CHINAMFG Escape 2008-2012
65-9416	For CHINAMFG CHINAMFG 1987-1989	936-892	For CHINAMFG ESCAPE 2008-2012
65-9400	For CHINAMFG CHINAMFG 1987-1989	7E5Z4R602A	For CHINAMFG CHINAMFG 2008-2012
65-9636	For CHINAMFG Ranger 1988	8G1Z4R602A	For CHINAMFG Taurus 2008-2015
65-9638	For CHINAMFG Ranger 1988-1989	936-809	For CHINAMFG F-150 2571-2011
65-9823	For CHINAMFG CHINAMFG II 1989-1990	AL344K145KA	For CHINAMFG LOBO 2571-2011
65-9739	For CHINAMFG F-350 1989-1994	946-831	For CHINAMFG F-150 2011-2014
65-9667	For CHINAMFG F-350 1989-1994	BL3V4602BD	For CHINAMFG F-150 2011-2014
938-066	For CHINAMFG F-250 1989-1997	8G1Z4R602B	For CHINAMFG Explorer 2011-2015
65-9664	For CHINAMFG CHINAMFG 1990-1993	BC3Z4A376A	For CHINAMFG F-250 Super Duty 11-16
65-9665	For CHINAMFG CHINAMFG 1990-1994	5L834K145BA	For CHINAMFG Escape 2013-2017
65-9662	For CHINAMFG RANGER 1990-1994	7C19-4K145-DB	For CHINAMFG Transit 2015-2016
65-9660	For CHINAMFG CHINAMFG 1990-1996	7C19-4K145-BB	For CHINAMFG Transit
65-9663	For CHINAMFG CHINAMFG 1990-1996	7C19-4K145-DB	For CHINAMFG Transit 2015-2016
65-9443	For CHINAMFG CHINAMFG 1988-1996	5L834K145BA	For CHINAMFG Escape 2013-2017
65-9444	For CHINAMFG CHINAMFG 1990-1996	AL3Z4A376D	For CHINAMFG Expedition 2007-2014
65-9661	For CHINAMFG EXPLORER 1991-1994	5C3Z4A376G	For CHINAMFG F250 Super Duty 99-04
65-9624	For CHINAMFG Explorer 1995-1996	CV6Z4R602B	For CHINAMFG Escape 2013-2016
65-9447	For CHINAMFG F-350 1995-1996	4641968AE	For CHINAMFG Escape 2013-2016
65-9449	For CHINAMFG F-350 1995-1996	BL3Z4R602D	For CHINAMFG F150 2011-2012
65-9675	For CHINAMFG Ranger 1995-1997	ZZR0-25-100	For CHINAMFG Explorer Sport Trac 05
65-9672	For CHINAMFG F-100 1996-1997	2L8Z4R602BA	For CHINAMFG Escape 2001-2007
65-9453	For CHINAMFG F-150 1997-1998	XL2Z-4A376-AA	For CHINAMFG Explorer Sport 2002-2003
65-9544	For CHINAMFG F-150 2004	1L2Z4A376A	For CHINAMFG EXPLORER 2002-2571
65-9545	For CHINAMFG F-150 1999-2003	936-805	For CHINAMFG F-150 2004
65-9441	For CHINAMFG CHINAMFG 1988-1993	8L3Z4R602E	For CHINAMFG F-150 2004-2008
65-2001	For CHINAMFG EXPEDITION 06-14	8L3Z4R602F	For CHINAMFG F-150 2004-2008
65-9305	For CHINAMFG F-250 Super Duty 99-01	65-9302	For CHINAMFG EXCURSION 2001-2005
65-9112	For CHINAMFG F-250 Super Duty 99-02	E9TZ4A376B	For CHINAMFG CHINAMFG 1990-1996
65-9115	For CHINAMFG F-250 Super Duty 99-02	F6TZ4A376RA	For CHINAMFG F-150 1990-1996
938-304	For CHINAMFG F-350 Super Duty 11-16	F77A4376BB	For CHINAMFG EXPLORER 1997-2001
936-802	For CHINAMFG F-150 2004-2008	F75Z4A376BB	For CHINAMFG Expedition 1997-2002
65-9546	For CHINAMFG Excursion 2001-2005	F77Z4A376CB	For CHINAMFG EXPLORER 1998-2001
946-448	For CHINAMFG F-350 Super Duty 02-03	5L544602DB	For CHINAMFG Ranger 1998-2011
65-9304	For CHINAMFG EXCURSION 2000-2003	5C3Z4A376D	For CHINAMFG F-250 Super Duty 99-06
65-9303	For CHINAMFG EXCURSION 2000-2003	YC3Z4A376EA	For CHINAMFG F-350 Super Duty 99-06
938-082	For CHINAMFG F-150 2009-2014	F81Z4A376HA	For CHINAMFG F-350 Super Duty 99-06
65-9300	For CHINAMFG EXCURSION 2001-2003	5C3Z4A376FA	For CHINAMFG F-250 Super Duty 99-10
65-9463	For CHINAMFG ESCAPE 2001-2005	7C194K357HB	For CHINAMFG Transit 2000-2006
65-9440	For CHINAMFG CHINAMFG 1983-1987	5C3Z4A376G	For CHINAMFG F250 Super Duty 99-04
65-9110	For CHINAMFG F-250 Super Duty 99-02	7C19-4K145-BB	For CHINAMFG Transit
65-9114	For CHINAMFG F-350 Super Duty 99-02	7C19-4K145-DB	For CHINAMFG Transit 2015-2016
65-9116	For CHINAMFG F-250 Super Duty 99-02	5L834K145BA	For CHINAMFG Escape 2013-2017
65-9442	For CHINAMFG CHINAMFG 1988-1990	AL3Z4A376D	For CHINAMFG Expedition 2007-2014
65-9443	For CHINAMFG CHINAMFG 1988-1996	7A2Z4R602N	For CHINAMFG Explorer Sport Trac 07-10
65-9444	For CHINAMFG CHINAMFG 1990-1996	938-082	For CHINAMFG F-150 2009-2014
65-9544	For CHINAMFG F-150 2004	65-9441	For CHINAMFG CHINAMFG 1988-1993
65-9545	For CHINAMFG F-150 1999-2003	65-2001	For CHINAMFG Expedition 2006-2014
65-2000	9C3Z4A376C	1L244A376A	5L3Z-4R602-W
65-2002	AE5Z4R602A	1L244A376AA	5L3Z-4R602-WA
65-2003	AL344K145KB	1L244A376AD	5L3Z-4R602-WB
65-2004	AL3Z4A376C	1L244A376AE	5L3Z4R602ZA
65-2005	AL3Z4R602KB	1L244A376AF	5L3Z4R602ZB
65-2011	BC3Z-4A376-A	1L2Z4A376AA	5L5Z4602B
65-2012	BL3V-4602-BD	1L2Z-4A376-AA	5L8Z4R602BA
65-2013	BL3Z4R602H	2C3Z4R602FB	6F934K145AC
65-2015	BL8Z4R602A	2L1Z4A376AA	6L344K145BG
65-2016	CN4C154K145AD	2L8Z4R602AA	6L34-4K145-HB
65-9157	CN4D154K357AD	3C3Z4A376AA	6L34-4K145-HC
65-9159	DL3Z4R602AH	3L8Z4R602BA	6L34-4K145-KC
65-9293	DL3Z4R602AL	4L34-4K145-PD	6L34-4K145-TF
65-9294	DL3Z4R602B	4L34-4K145-TF	6L34-4K145-WB
65-9450	DL3Z4R602E	4L34-4K145-WA	6L3Z4R602Z
65-9451	DL3Z4R602Q	4L34-4K145-WC	6L8Z4R602B
65-9462	DL3Z4R602T	5C3Z4A376A	6R3Z4602B
65-9543	DT4Z4R602A	5C3Z4A376AA	7A2Z4R602D
938-063	DV61-4K145-AC	5C3Z4A376CA	7A2Z4R602G
938-076	E5TZ4A376C	5C3Z4A376DA	7A2Z4R602K
938-091	E9TA4376DA	5C3Z4A376EA	7C19-4K145DB
938-199	F0TA4602ZA	5C3Z4A376F	7L1Z4A376A
938-301	F1TZ4602-2	5C3Z4A376JA	7L1Z4A376B
938-305	F2G34K145CC	5C3Z4A376LA	7L344K145BA
938-801	F37A4A376BB	5C3Z4A376NA	7L34-4K145-BA
938-802	F65Z4602EA	5L34-4K145-PA	7L34-4K145-TA
946-821	F65Z4602NB	5L34-4K145-PD	7L34-4K145-WA
946-830	F77A4376CB	5L34-4K145-RA	7L3Z-4R602-C
976-698	F81Z4A376KA	5L34-4K145-TA	7L3Z-4R602-J
936-285	F81Z4A376MA	5L34-4K145-TC	7L8Z4R602B
936-288	F81Z4A376NA	5L34-4K145-TD	7L8Z-4R602-B
936-325	F81Z4A376PA	5L34-4K145-VA	7R3Z-4602-A
936-327	F81Z4R602FL	5L34-4K145-VC	8E5Z4R602A
936-800	FG1Z4R602A	5L34-4K145-WB	8L34-4K145-TA
936-801	SA5525100A	5L34-4K145-WC	8L34-4K145-VA
936-803	SA5525100E	5L34-4K145-WD	8L3Z-4602-D
936-806	SA5525100F	5L3Z4A376A	8L3Z-4R602-B
936-808	SA5525100L	5L3Z4R602BB	8L3Z-4R602-C
936-810	SA5525100M	5L3Z-4R602-T	8L3Z-4R602-D
936-811	SA5625100K	5L3Z-4R602-TC	8L3Z4R602-E
936-813	SA5625100L	YL8Z4602AH	8L3Z-4R602-F
936-846	SA60E-25-100AC	YL8Z4602AJ	8L3Z4R602G
936-891	SA7125100	YL8Z4602BH	8L3Z-4R602-H
936-896	XL2Z4A376AA	YL8Z4602BJ	8L844K145DA
936-942	XL2Z-4A376-BA	ZZC571100A	YC3Z4A376VA
936-973	XL2Z4A376BB	ZZL571500	YC3Z4A376WA
938-031	YC3W4A376AB	ZZP325100	YL844602AM
65-9731	YC3Z4A376AA	YC3Z4A376SA	YL844602BH
65-9293	YC3Z4A376AB	YC3Z4A376TA	YL844602BM
65-9713	YC3Z4A376RA	YC3Z4A376CA	65-9294

If you need more information about FORD Propeller Shaft, please message or email to us ASAP.

—- OUR ADVANTAGE —-
+700 models for AMERICA & EUROPE marketMOQ: 3PCS / for 1 item, MIN order amount: USD5000
Quality assurance: One Year WarrantyStable delivery time: 45 days
Free Sample DevelopedApply O/A 30-90 days for regular customer

Becides CHINAMFG Propeller Shaft,we have Over 700 items applicable for following vehicles:

—- F A Q —-
Q1: If we don’t find what we need on your website, what should we do?
You can send us the OE number or of the product you need, we will check if we have them.
We also develop new models according to customer’s need;
you can contact us for more detail.
Q2: Can I get a price discount if I order large quantities?Yes, it depends on your purchasing quantity, more quantity more discount.
Q3: What about the delivery time?If we have stock, we can send you the goods within 3 working days,
if we don’t have stock, generally it needs 10 to 40 days.

Q4: What’s our MOQ?Sample order for quality testing 1 piece , normal order 50 pieces for 1 order with mixed models .
Q5: What’s your payment terms and condition ?We can accept T/T , LC, Trade Assurance, Western Union, Paypal, Moneygram ect.

After-sales Service:	1 Year
Condition:	New
Color:	Black
Certification:	ISO, Ts16949
Type:	Drive Shaft
Application Brand:	Ford

Samples:	US$ 300/Piece 1 Piece(Min.Order) \| Request Sample

Customization:	Available \| Customized Request

cardan shaft

How do cardan shafts handle variations in length and connection methods?

Cardan shafts are designed to handle variations in length and connection methods, allowing for flexibility in their installation and use. These shafts incorporate several features and mechanisms that enable them to accommodate different lengths and connection methods. Let’s explore how cardan shafts handle these variations:

1. Telescopic Design:

– Cardan shafts often employ a telescopic design, which consists of multiple sections that can slide in and out. These sections allow for adjustment of the overall length of the shaft to accommodate variations in distance between the driving and driven components. By telescoping the shaft, it can be extended or retracted as needed, ensuring proper alignment and power transmission.

2. Slip Yokes:

– Slip yokes are components used in cardan shafts that allow for axial movement. They are typically located at one or both ends of the telescopic sections. Slip yokes provide a sliding connection that compensates for changes in length and helps to maintain proper alignment between the driving and driven components. When the length of the shaft needs to change, the slip yokes slide along the shaft, allowing for the necessary adjustment without disrupting power transmission.

3. Flange Connections:

– Cardan shafts can utilize flange connections to attach the shaft to the driving and driven components. Flange connections provide a secure and rigid connection, ensuring efficient power transfer. The flanges are typically bolted or welded to the shaft and the corresponding components, such as the transmission, differential, or axle. Flange connections allow for easy installation and removal of the cardan shaft while maintaining stability and alignment.

4. Universal Joints:

– Universal joints, or U-joints, are essential components in cardan shafts that allow for angular misalignment between the driving and driven components. They consist of a cross-shaped yoke and needle bearings at each end. The universal joints provide flexibility and compensate for variations in angle and alignment. This flexibility enables cardan shafts to handle different connection methods, such as non-parallel or offset connections, while maintaining efficient power transmission.

5. Splined Connections:

– Some cardan shafts employ splined connections, where the shaft and the driving/driven components have matching splined profiles. Splined connections provide a precise and secure connection that allows for torque transmission while accommodating length variations. The splined profiles enable the shaft to slide in and out, adjusting the length as needed while maintaining a positive connection.

6. Customization and Adaptable Designs:

– Cardan shafts can be customized and designed to handle specific variations in length and connection methods based on the requirements of the application. Manufacturers offer a range of cardan shaft options with different lengths, sizes, and connection configurations. By collaborating with cardan shaft manufacturers and suppliers, engineers can select or design shafts that match the specific needs of their systems, ensuring optimal performance and compatibility.

In summary, cardan shafts handle variations in length and connection methods through telescopic designs, slip yokes, flange connections, universal joints, splined connections, and customizable designs. These features allow the shafts to adjust their length, compensate for misalignment, and establish secure connections while maintaining efficient power transmission. By incorporating these mechanisms, cardan shafts offer flexibility and adaptability in various applications where length variations and different connection methods are encountered.

cardan shaft

Can you provide real-world examples of vehicles and machinery that use cardan shafts?

Cardan shafts are widely used in various vehicles and machinery across different industries. They are employed in applications where torque transmission, power distribution, and flexibility are crucial. Here are some real-world examples of vehicles and machinery that utilize cardan shafts:

1. Automotive Vehicles:

– Cars, trucks, and SUVs: Cardan shafts are commonly found in rear-wheel drive (RWD) and four-wheel drive (4WD) vehicles. They connect the transmission or transfer case to the rear differential or front differential, respectively, enabling torque transmission to the wheels. Examples include sedans, pickup trucks, and SUVs like Jeep Wrangler, Ford F-150, and Toyota Land Cruiser.

– Buses and commercial vehicles: Cardan shafts are used in buses and commercial vehicles that have rear-wheel drive or all-wheel drive configurations. They transmit torque from the engine or transmission to the rear axle or multiple axles. Examples include city buses, coaches, and delivery trucks.

2. Off-Road and Utility Vehicles:

– Off-road vehicles: Many off-road vehicles, such as off-road trucks, SUVs, and all-terrain vehicles (ATVs) utilize cardan shafts. These shafts provide the necessary torque transfer and power distribution to all wheels for improved traction and off-road capabilities. Examples include the Land Rover Defender, Jeep Wrangler Rubicon, and Yamaha Grizzly ATV.

– Agricultural machinery: Farm equipment like tractors and combine harvesters often employ cardan shafts to transmit power from the engine to various attachments such as mowers, balers, and harvesters. The shafts enable efficient power distribution and flexibility for different agricultural tasks.

– Construction and mining machinery: Equipment used in construction and mining applications, such as excavators, loaders, and bulldozers, utilize cardan shafts to transfer power from the engine or transmission to the different components of the machinery. These shafts enable power distribution and torque transmission to various attachments, allowing for efficient operation in demanding environments.

3. Industrial Machinery:

– Manufacturing machinery: Cardan shafts are used in industrial equipment such as conveyors, mixers, and rotary equipment. They provide torque transmission and power distribution within the machinery, enabling efficient operation and movement of materials.

– Paper and pulp industry: Cardan shafts are employed in paper and pulp processing machinery, including paper machines and pulp digesters. These shafts facilitate power transmission and torque distribution to various parts of the machinery, contributing to smooth operation and high productivity.

– Steel and metal processing machinery: Equipment used in steel mills and metal processing facilities, such as rolling mills, extruders, and coil winding machines, often utilize cardan shafts. These shafts enable power transmission and torque distribution to the different components involved in metal forming, shaping, and processing.

These examples represent just a few of the many applications where cardan shafts are employed. Their versatility, durability, and ability to handle torque transmission and power distribution make them essential components in a wide range of vehicles and machinery across industries.

cardan shaft

Which industries and vehicles commonly use cardan shafts for power distribution?

1. Automotive Industry:

2. Agriculture and Farming:

3. Construction and Mining:

4. Industrial Equipment and Machinery:

5. Marine and Shipbuilding:

6. Rail and Locomotives:

China Good quality 65-9450 Front Drive Shaft for CZPT Explorer 1997-2001 65-9294 Prop Propeller Cardan Shaft
editor by CX 2023-11-17

China Standard Agricultural Cardan Shafts Type and Cultivators Use Pto Shaft

Product Description

Specification OF PTO Drive Shaft —Speedway:

We developed and produced many tractor spare parts for Japanese Tractors .

Product Name: Japanese tractor transmission clutch disc parts for B1400 B7000

Tractor Model we can supply: B1500/1400,B5000,B6000, B7000, TU1400, TX1400, TX1500, YM F1401, YM1400 ETC.

The parts for example: Tyres, rim Jante, Kit coupling KB-TX 3 point linkage. Exhaust pipe Steering wheel. Kit coupling YM F14/F15, gear shaft, PTO shaft, PTO cardan, key, regulator ect.

Most of the spare parts are with stock. If you are interested in, please feel easy to contact me.

Other relevant parts for cars or machinery we have made in our workshop are as follows:
Drive shaft parts and assemblies,
Universal joint parts and assemblies,
PTO drive shafts,
Spline shafts,
Slip yokes,
Weld yokes,
Flange yokes,
Steering columns,
Connecting rods,
etc.

Product Description

Pto Drive Shaft Item:

Item	Cross journal size		540dak-rpm		1000dak-rpm
Series 1	22mm	54mm	12KW	16HP	18KW	25HP
Series 2	23.8mm	61.3mm	15KW	21HP	23KW	31HP
Series 3	27mm	70mm	26KW	35HP	40KW	55HP
Series 4	27mm	74.6mm	26KW	35HP	40KW	55HP
Series 5	30.2mm	80mm	35KW	47HP	54KW	74HP
Series 6	30.2mm	92mm	47KW	64HP	74KW	100HP
Series 7	30.2mm	106.5mm	55KW	75HP	87KW	18HP
Series 8	35mm	106.5mm	70KW	95HP	110KW	150HP
Series 38	38mm	102mm	70KW	95HP	110KW	150HP

Company Profile

Certifications

FAQ

Type:	Shaft
Usage:	Agricultural Products Processing, Farmland Infrastructure, Harvester, Planting and Fertilization, Grain Threshing, Cleaning and Drying
Material:	Stainless Steel
Power Source:	Pto Dirven Shaft
Weight:	Standard
After-sales Service:	1 Year

Samples:	US$ 300/Piece 1 Piece(Min.Order) \| Request Sample

cardan shaft

How do manufacturers ensure the compatibility of cardan shafts with different equipment?

Manufacturers take several measures to ensure the compatibility of cardan shafts with different equipment. These measures involve careful design, engineering, and manufacturing processes to meet the specific requirements of diverse applications. Let’s explore how manufacturers ensure compatibility:

1. Application Analysis:

– Manufacturers begin by analyzing the application requirements and specifications provided by customers. This analysis includes understanding factors such as torque, speed, misalignment, operating conditions, space limitations, and other specific needs. By evaluating these parameters, manufacturers can determine the appropriate design and configuration of the cardan shaft to ensure compatibility with the equipment.

2. Customization Options:

– Manufacturers offer customization options for cardan shafts to meet the unique requirements of different equipment. This includes providing various lengths, sizes, torque capacities, connection methods, and material options. Customers can work closely with manufacturers to select or design a cardan shaft that fits their specific equipment and ensures compatibility with the system’s power transmission needs.

3. Engineering Expertise:

– Manufacturers employ experienced engineers who specialize in cardan shaft design and engineering. These experts have in-depth knowledge of mechanical power transmission and understand the complexities involved in ensuring compatibility. They use their expertise to design cardan shafts that can handle the specific torque, speed, misalignment, and other parameters required by different equipment.

4. Computer-Aided Design (CAD) and Simulation:

– Manufacturers utilize advanced computer-aided design (CAD) software and simulation tools to model and simulate the behavior of cardan shafts in different equipment scenarios. These tools allow engineers to analyze the stress distribution, bearing performance, and other critical factors to ensure the shaft’s compatibility and performance. By simulating the cardan shaft’s behavior under various loading conditions, manufacturers can optimize its design and validate its compatibility.

5. Quality Control and Testing:

– Manufacturers have stringent quality control processes in place to ensure the reliability, durability, and compatibility of cardan shafts. They conduct thorough testing to verify the performance and functionality of the shafts in real-world conditions. This may involve testing for torque capacity, speed limits, vibration resistance, misalignment tolerance, and other relevant parameters. By subjecting the cardan shafts to rigorous testing, manufacturers can ensure their compatibility with different equipment and validate their ability to deliver reliable power transmission.

6. Adherence to Standards and Regulations:

– Manufacturers follow industry standards and regulations when designing and manufacturing cardan shafts. Compliance with these standards ensures that the shafts meet the necessary safety, performance, and compatibility requirements. Examples of such standards include ISO 9001 for quality management and ISO 14001 for environmental management. By adhering to these standards, manufacturers demonstrate their commitment to producing compatible and high-quality cardan shafts.

7. Collaboration with Customers:

– Manufacturers actively collaborate with customers to understand their equipment and system requirements. They engage in discussions, provide technical support, and offer guidance to ensure the compatibility of the cardan shafts. By fostering a collaborative relationship, manufacturers can address specific challenges and tailor the design and specifications of the shaft to meet the unique requirements of different equipment.

In summary, manufacturers ensure the compatibility of cardan shafts with different equipment through application analysis, customization options, engineering expertise, CAD and simulation tools, quality control and testing, adherence to standards, and collaboration with customers. These measures allow manufacturers to design and produce cardan shafts that meet the specific torque, speed, misalignment, and other requirements of various equipment, ensuring optimal compatibility and efficient power transmission.

cardan shaft

Can cardan shafts be customized for specific vehicle or equipment requirements?

Yes, cardan shafts can be customized to meet the specific requirements of different vehicles or equipment. Manufacturers offer a range of customization options to ensure that the cardan shafts are tailored to the unique needs of each application. Let’s explore how cardan shafts can be customized:

1. Length and Size:

– Cardan shafts can be manufactured in various lengths and sizes to accommodate the specific dimensions of the vehicle or equipment. Manufacturers can customize the overall length of the shaft to ensure proper alignment between the driving and driven components. Additionally, the size of the shaft, including the diameter and wall thickness, can be adjusted to meet the torque and load requirements of the application.

2. Torque Capacity:

– The torque capacity of the cardan shaft can be customized based on the power requirements of the vehicle or equipment. Manufacturers can design and manufacture the shaft with appropriate materials, dimensions, and reinforcement to ensure that it can transmit the required torque without failure or excessive deflection. Customizing the torque capacity of the shaft ensures optimal performance and reliability.

3. Connection Methods:

– Cardan shafts can be customized to accommodate different connection methods based on the specific requirements of the vehicle or equipment. Manufacturers offer various types of flanges, splines, and other connection options to ensure compatibility with the existing drivetrain components. Customizing the connection methods allows for seamless integration of the cardan shaft into the system.

4. Material Selection:

– Cardan shafts can be manufactured using different materials to suit the specific application requirements. Manufacturers consider factors such as strength, weight, corrosion resistance, and cost when selecting the material for the shaft. Common materials used for cardan shafts include steel alloys, stainless steel, and aluminum. By customizing the material selection, manufacturers can optimize the performance and durability of the shaft.

5. Balancing and Vibration Control:

– Cardan shafts can be customized with balancing techniques to minimize vibration and ensure smooth operation. Manufacturers employ dynamic balancing processes to reduce vibration caused by uneven distribution of mass. Customized balancing ensures that the shaft operates efficiently and minimizes stress on other components.

6. Protective Coatings and Finishes:

– Cardan shafts can be customized with protective coatings and finishes to enhance their resistance to corrosion, wear, and environmental factors. Manufacturers can apply coatings such as zinc plating, powder coating, or specialized coatings to prolong the lifespan of the shaft and ensure its performance in challenging operating conditions.

7. Collaboration with Manufacturers:

– Manufacturers actively engage in collaboration with customers to understand their specific vehicle or equipment requirements. They provide technical support and expertise to customize the cardan shaft accordingly. By collaborating closely with manufacturers, customers can ensure that the cardan shaft is designed and manufactured to meet their precise needs.

Overall, cardan shafts can be customized for specific vehicle or equipment requirements in terms of length, size, torque capacity, connection methods, material selection, balancing, protective coatings, and finishes. By leveraging customization options and working closely with manufacturers, engineers can obtain cardan shafts that are precisely tailored to the application’s needs, ensuring optimal performance, efficiency, and compatibility.

cardan shaft

Which industries and vehicles commonly use cardan shafts for power distribution?

1. Automotive Industry:

2. Agriculture and Farming:

3. Construction and Mining:

4. Industrial Equipment and Machinery:

5. Marine and Shipbuilding:

6. Rail and Locomotives:

China Standard Agricultural Cardan Shafts Type and Cultivators Use Pto Shaft
editor by CX 2023-11-14

China Good quality CZPT SWC-Bh Types Cardan Drive Shaft for Rolling Mill, Steel Mills Industry, Paper Mill Machinery

Product Description

SWC BH Cardan Shaft Basic Parameter And Main Dimension

Cardan shaft is widely used in rolling mill, punch, straightener, crusher, ship drive, paper making equipment, common machinery, water pump equipment, test bench, and other mechanical applications.

Advantage:
1. Low life-cycle costs and long service life;
2. Increase productivity;
3. Professional and innovative solutions;
4. Reduce carbon dioxide emissions, and environmental protection;
5. High torque capacity even at large deflection angles;
6. Easy to move and run smoothly;

Detailed Photos

Product Parameters

Model		Tn kN • m	T. kN • m	p (.)	LS mm	Lmin	Size mm									I kg. m2		m kg
Model		Tn kN • m	T. kN • m	p (.)	LS mm	Lmin	Di js11	d2 H7	Da	Lm	n-d	k	t	b h9	g	Lmin	100mm	Lmin	100mm
SWC58BH	58	0.15	0.075	≤22	35	325	47	30	38	35	4-5	3.5	1.5	–	–	–	–	2.2	–
SWC65BH	65	0.25	0.125	≤22	40	360	52	35	42	46	4-6	4.5	1.7	–	–	–	–	3.0	–
SWC75BH	75	0.50	0.25	≤22	40	395	62	42	50	58	6-6	5.5	2.0	–	–	–	–	5.0	–
SWC90BH	90	1.0	0.50	≤22	45	435	74.5	47	54	58	4-8	6.0	2.5	–	–	–	–	6.6	–
SWC100BH	100	1.5	0.75	≤25	55	390	84	57	60	58	6-9	7	2.5	–	–	0.0044	0.00019	6.1	0.35
SWC120BH	120	2.5	1.25	≤25	80	485	102	75	70	68	8-11	8	2.5	–	–	0.5719	0.00044	10.8	0.55
SWC150BH	150	5	2.5	≤25	80	590	13.0	90	89	80	8-13	10	3.0	–	–	0.0423	0.00157	24.5	0.85
SWC160BH	160	10	5	≤25	80	660	137	100	95	110	8-15	15	3.0	20	12	0.1450	0.0060	68	1.72
SWC180BH	180	20	10	≤25	100	810	155	105	114	130	8-17	17	5.0	24	14	0.1750	0.0070	70	2.8
SWC200BH	200	32	16	≤15	110	860	170	120	127	135	8-17	19	5.0	28	16	0.3100	0.0130	86	3.6
SWC225BH	225	40	20	≤15	140	920	196	135	152	120	8-17	20	5.0	32	9.0	0.5380	0.5714	122	4.9
SWC250BH	250	63	31.5	≤15	140	1035	218	150	168	140	8-19	25	6.0	40	12.5	0.9660	0.5717	172	5.3
SWC285BH	285	90	45	≤15	140	1190	245	170	194	160	8-21	27	7.0	40	15.0	2.0110	0.571	263	6.3
SWC315BH	315	125	63	≤15	140	1315	280	185	219	180	10-23	32	8.0	40	15.0	3.6050	0.571	382	8.0
SWC350BH	350	180	90	≤15	150	1410	310	210	267	194	10-23	35	8.0	50	16.0	7.571	0.2219	582	15.0
SWC390BH	390	250	125	≤15	170	1590	345	235	267	215	10-25	40	8.0	70	18.0	12.164	0.2219	738	15.0
SWC440BH	440	355	180	≤15	190	1875	390	255	325	260	16-28	42	10	80	20.0	21.420	0.4744	1190	21.7
SWC490BH	490	500	250	≤15	190	1985	435	275	325	270	16-31	47	12	90	22.5	32.860	0.4744	1452	21.7
SWC550BH	550	710	355	≤15	240	2300	492	320	426	305	16-31	50	12	100	22.5	68.920	1.3570	2380	34

Packaging & Shipping

Company Profile

HangZhou CHINAMFG Machinery Manufacturing Co., Ltd. is a high-tech enterprise specializing in the design and manufacture of various types of coupling. There are 86 employees in our company, including 2 senior engineers and no fewer than 20 mechanical design and manufacture, heat treatment, welding, and other professionals.

Advanced and reasonable process, complete detection means. Our company actively introduces foreign advanced technology and equipment, on the basis of the condition, we make full use of the advantage and do more research and innovation. Strict to high quality and operate strictly in accordance with the ISO9000 quality certification system standard mode.

Our company supplies different kinds of products. High quality and reasonable price. We stick to the principle of “quality first, service first, continuous improvement and innovation to meet the customers” for the management and “zero defect, zero complaints” as the quality objective.

Our Services

1. Design Services
Our design team has experience in Cardan shafts relating to product design and development. If you have any needs for your new product or wish to make further improvements, we are here to offer our support.

2. Product Services
raw materials → Cutting → Forging →Rough machining →Shot blasting →Heat treatment →Testing →Fashioning →Cleaning→ Assembly→Packing→Shipping

3. Samples Procedure
We could develop the sample according to your requirement and amend the sample constantly to meet your need.

4. Research & Development
We usually research the new needs of the market and develop new models when there are new cars in the market.

5. Quality Control
Every step should be a particular test by Professional Staff according to the standard of ISO9001 and TS16949.

FAQ

Q 1: Are you a trading company or a manufacturer?
A: We are a professional manufacturer specializing in manufacturing
various series of couplings.

Q 2:Can you do OEM?
Yes, we can. We can do OEM & ODM for all customers with customized PDF or AI format artwork.

Q 3:How long is your delivery time?
Generally, it is 20-30 days if the goods are not in stock. It is according to quantity.

Q 4: Do you provide samples? Is it free or extra?
Yes, we could offer the sample but not for free. Actually, we have an excellent price principle, when you make the bulk order the cost of the sample will be deducted.

Q 5: How long is your warranty?
A: Our Warranty is 12 months under normal circumstances.

Q 6: What is the MOQ?
A: Usually our MOQ is 1pcs.

Q 7: Do you have inspection procedures for coupling?
A:100% self-inspection before packing.

Q 8: Can I have a visit to your factory before the order?
A: Sure, welcome to visit our factory.

Q 9: What’s your payment?
A:1) T/T.

♦Contact Us

Web: huadingcoupling
Add: No.11 HangZhou Road,Chengnan park,HangZhou City,ZheJiang Province,China

Standard Or Nonstandard:	Standard
Shaft Hole:	as Your Requirement
Torque:	as Your Requirement

Customization:	Available \| Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost: Estimated freight per unit.	about shipping cost and estimated delivery time.

Payment Method:
	Initial Payment Full Payment

Currency:	US$

Return&refunds:	You can apply for a refund up to 30 days after receipt of the products.

cardan shaft

How do manufacturers ensure the compatibility of cardan shafts with different equipment?

1. Application Analysis:

2. Customization Options:

3. Engineering Expertise:

4. Computer-Aided Design (CAD) and Simulation:

5. Quality Control and Testing:

6. Adherence to Standards and Regulations:

7. Collaboration with Customers:

cardan shaft

What safety precautions should be followed when working with cardan shafts?

1. Personal Protective Equipment (PPE):

2. Training and Familiarity:

3. Lockout/Tagout Procedures:

4. Secure the Equipment:

5. Ventilation:

6. Proper Lifting Techniques:

7. Inspection and Maintenance:

8. Avoid Exceeding Design Limits:

9. Proper Disposal of Used Parts and Lubricants:

10. Emergency Response:

By following these safety precautions, individuals working with cardan shafts can minimize the risks associated with their operation and ensure a safe working environment.

cardan shaft

What benefits do cardan shafts offer for different types of vehicles and equipment?

1. Efficient Power Transmission:

2. Flexibility and Misalignment Compensation:

3. Adaptability to Variable Configurations:

4. Vibration Damping and Smooth Operation:

5. Safety and Protection:

6. Suitable for Various Applications:

China Good quality CZPT SWC-Bh Types Cardan Drive Shaft for Rolling Mill, Steel Mills Industry, Paper Mill Machinery
editor by CX 2023-11-14

China high quality ODM 19-32 Flexible Woodon China Falk as Coupling for Transmission Cardan Shaft

Product Description

Product Name	Cardan Shaft
Product Model	SWC-I75A-335+40
Main Material	35CrMo or 45# Steel
Nominal Torque	500 N.M
Normal Length	335 mm
Length Compensation	40 mm

Standard Or Nonstandard:	Nonstandard
Shaft Hole:	19-32
Torque:	>80N.M

Samples:	US$ 10/Piece 1 Piece(Min.Order) \| Order Sample

Customization:	Available \| Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost: Estimated freight per unit.	about shipping cost and estimated delivery time.

Payment Method:
	Initial Payment Full Payment

Currency:	US$

Return&refunds:	You can apply for a refund up to 30 days after receipt of the products.

cardan shaft

Are there any limitations or disadvantages associated with cardan shaft systems?

While cardan shaft systems offer numerous advantages, they also have some limitations and disadvantages that should be considered. Let’s explore these limitations in detail:

1. Angular Misalignment:

– Cardan shafts are designed to accommodate angular misalignment between the driving and driven components. However, excessive misalignment can lead to increased wear, vibration, and decreased efficiency. If the misalignment exceeds the recommended limits, it can put additional stress on the universal joints and other components, reducing the lifespan of the shaft and potentially causing mechanical failures.

2. Noise and Vibration:

– Cardan shaft systems can introduce noise and vibration into the equipment or vehicle. The universal joints and slip yokes in the shaft assembly can generate vibrations as they rotate, especially at high speeds. These vibrations can contribute to increased noise levels, potentially causing discomfort for passengers or affecting the performance of sensitive equipment. Proper balancing and maintenance of the shaft can help mitigate these effects, but they may still be present to some extent.

3. Maintenance and Lubrication:

– Cardan shaft systems require regular maintenance and lubrication to ensure optimal performance and longevity. The universal joints and slip yokes need to be properly lubricated to minimize friction and wear. If maintenance is neglected, the joints can wear out quickly, leading to increased vibration, noise, and potential failure. Regular inspections and lubrication are necessary to maintain the efficiency and reliability of cardan shaft systems.

4. Limited Flexibility in High-Speed Applications:

– Cardan shafts have limitations when it comes to high-speed applications. At high rotational speeds, the centrifugal forces acting on the rotating components can cause significant stress on the shaft and universal joints. This can result in increased wear, reduced lifespan, and potential failure. In such cases, alternative power transmission systems such as constant-velocity (CV) joints or direct drives may be more suitable.

5. Space and Weight Constraints:

– Cardan shaft systems require sufficient space for installation due to their length and telescopic design. In applications with limited space constraints, it may be challenging to accommodate the full length of the shaft, or modifications may be necessary to ensure proper fit. Additionally, the weight of the shaft can be a consideration, especially in applications where weight reduction is crucial. In such cases, alternative lightweight materials or drive systems may be more appropriate.

6. Cost:

– Cardan shaft systems can be relatively costly compared to other power transmission options. The complexity of their design, the need for customization, and the use of multiple components contribute to higher manufacturing and installation costs. However, it’s important to consider the overall benefits and performance of cardan shaft systems when evaluating their cost-effectiveness for specific applications.

7. Limited Misalignment Compensation:

– While cardan shafts can accommodate angular misalignment, they have limitations when it comes to compensating for other types of misalignment, such as parallel offset or axial displacement. In applications that require significant compensation for these types of misalignment, alternative power transmission systems with more advanced flexibility, such as flexible couplings or CV joints, may be more suitable.

Despite these limitations, cardan shaft systems remain widely used and offer numerous advantages in various applications. By understanding these limitations and considering the specific requirements of the application, engineers can make informed decisions regarding the suitability of cardan shaft systems or explore alternative power transmission options.

cardan shaft

What safety precautions should be followed when working with cardan shafts?

1. Personal Protective Equipment (PPE):

2. Training and Familiarity:

3. Lockout/Tagout Procedures:

4. Secure the Equipment:

5. Ventilation:

6. Proper Lifting Techniques:

7. Inspection and Maintenance:

8. Avoid Exceeding Design Limits:

9. Proper Disposal of Used Parts and Lubricants:

10. Emergency Response:

By following these safety precautions, individuals working with cardan shafts can minimize the risks associated with their operation and ensure a safe working environment.

cardan shaft

What benefits do cardan shafts offer for different types of vehicles and equipment?

1. Efficient Power Transmission:

2. Flexibility and Misalignment Compensation:

3. Adaptability to Variable Configurations:

4. Vibration Damping and Smooth Operation:

5. Safety and Protection:

6. Suitable for Various Applications:

China high quality ODM 19-32 Flexible Woodon China Falk as Coupling for Transmission Cardan Shaft
editor by CX 2023-11-14

China high quality Professional Production Drive Shaft Cardan Shaft Power Transmission Shaft Spline Shaft

Product Description

Transmission shaft

Product Description

Product Name	Transmission shaft
Design	Can be at the customer’ request, tailor-made, at customer’s design
Advantage	ZJD can provide the transmission shaft according to customers technical specifications.

Our Advantages

Application

Product Display

Company Profile

ZJD is located in Xihu (West Lake) Dis. Economic Development Zone, Xihu (West Lake) Dis. District, HangZhou, ZheJiang , which has very good transportation convenience and location advantages.ZJD own 1 subsidiary, which is located in HangZhou city, ZheJiang province, which is mainly responsible for EMU accessories for CRRC’s factory nearby.
ZJD’s production and office space is more than 12,000 square meters, and more than 60 sets of various types of CNC machining and quality control equipment.ZJD’s main products are widely used in CHINAMFG CR400, CR300, CR200 series standard EMUs, and expanded to subways, export passenger cars and EMUs and other products.
ZJD has more than 60 employees and more than 20 technical management personnel. The technical management team has many years of working experience in the rail transit industry.

Certifications

ZJD has obtained the national high-tech enterprise certification, 6 types of products have passed the high-tech certification, and related products have obtained more than 20 patents.
ZJD has established a comprehensive quality management system and has got ISO9001 quality management system certification, ISO/TS 22163 (IRIS) international railway industry standard certification, EN15085-2 railway vehicles welding system certification, and CHINAMFG product supply service qualification certification.

FAQ

1. Who are we?

HangZhou ZJD Rail Equipment Co.,Ltd. was established in 2012, which is a professional manufacturer of rail equipment and accessories.

2. Are you a reliable supplier?
ZJD-Excellent Manufacturer focusing on the rolling stock industry
Provide full-process Design, Production, Testing and Service according to customer requirements.

3.What can you buy from us?
We have designed and supplied a series of products such an air duct systems, piping systerms, pneumatic control units,etc.The product are used in various fields such an EMUs,subways,locomotives,wagon engineering vehicles,etc.

4. What services can we provide?
Provide customized services of heavy industry products for special requirements.
Provide diversified parts and trade services such as port machinery, steel heavy industry, mining machinery, etc.
Provide customized products for new energy equipment
Provide key process technology solutions for special parts in the field of new energy equipment.

Material:	Carbon Steel
Load:	Revolution Axis
Stiffness & Flexibility:	Flexible Shaft
Axis Shape:	Straight Shaft
Shaft Shape:	Real Axis
Appearance Shape:	Round

Customization:	Available \| Customized Request

cardan shaft

What factors should be considered when selecting the right cardan shaft for an application?

1. Torque Requirements:

2. Speed and RPM:

3. Angle of Misalignment:

4. Operating Conditions:

5. Length and Size:

6. Maintenance and Serviceability:

7. Cost and Budget:

cardan shaft

How do cardan shafts enhance the performance of trucks and heavy-duty vehicles?

1. Torque Transmission:

2. Power Distribution:

3. Flexibility and Misalignment Compensation:

4. Durability and Reliability:

5. Powertrain Efficiency:

6. Weight Reduction:

7. Adaptability to Various Configurations:

cardan shaft

What benefits do cardan shafts offer for different types of vehicles and equipment?

1. Efficient Power Transmission:

2. Flexibility and Misalignment Compensation:

3. Adaptability to Variable Configurations:

4. Vibration Damping and Smooth Operation:

5. Safety and Protection:

6. Suitable for Various Applications:

China high quality Professional Production Drive Shaft Cardan Shaft Power Transmission Shaft Spline Shaft
editor by CX 2023-11-10