Author Archives: ep

China 100% Original Diesel Fuel Drive Shaft Lock Screw 7189-003 for DP210 DP310 Pump drive shaft yoke

Design: Other
Calendar year: Other
Engine: Other
OE NO.: 7189-003
Vehicle Fitment: Other
Guarantee: 6 Months
Auto Model: XPI Injector
Item Title: Drive Shaft Lock Screw
Product Amount: 7189-003
Content: metal
Packing: Neutral Packing
Top quality: High-High quality
Shipping time: 3-7days
Packaging Information: Carton Packing
Port: DaLian , 140 Excavator bulldozer Observe dozer Entrance Loafer guide Roller Loafer sprocket Wheel For CZPT cat Undercarriage CZPT ZheJiang , Owen 980w 8115BARPSI Portable Industrial Compressors Device Mini AC Air Compressor China

push shaft lock screw 7189-003 Specification

item
OE NO.7189-003
Warranty6 Months
Place of OriginZheJiang
Brand IdentifyXTF
Car Design
Product Identify drive shaft lock screw
Product Quantity7189-003
Materialsteel
PackingNeutral Packing
QualityHigh-High quality
Delivery time3-7days
Packing & Portable Styling large power Metallic Double Cylinder Vehicle Tire Tyre Inflator DC 12V Metal Vehicle Auto Electric Pump Air Compressor Supply Carton Packing Organization Profile

air-compressor

Guide to Drive Shafts and U-Joints

If you’re concerned about the performance of your car’s driveshaft, you’re not alone. Many car owners are unaware of the warning signs of a failed driveshaft, but knowing what to look for can help you avoid costly repairs. Here is a brief guide on drive shafts, U-joints and maintenance intervals. Listed below are key points to consider before replacing a vehicle driveshaft.

Symptoms of Driveshaft Failure

Identifying a faulty driveshaft is easy if you’ve ever heard a strange noise from under your car. These sounds are caused by worn U-joints and bearings supporting the drive shaft. When they fail, the drive shafts stop rotating properly, creating a clanking or squeaking sound. When this happens, you may hear noise from the side of the steering wheel or floor.
In addition to noise, a faulty driveshaft can cause your car to swerve in tight corners. It can also lead to suspended bindings that limit overall control. Therefore, you should have these symptoms checked by a mechanic as soon as you notice them. If you notice any of the symptoms above, your next step should be to tow your vehicle to a mechanic. To avoid extra trouble, make sure you’ve taken precautions by checking your car’s oil level.
In addition to these symptoms, you should also look for any noise from the drive shaft. The first thing to look for is the squeak. This was caused by severe damage to the U-joint attached to the drive shaft. In addition to noise, you should also look for rust on the bearing cap seals. In extreme cases, your car can even shudder when accelerating.
Vibration while driving can be an early warning sign of a driveshaft failure. Vibration can be due to worn bushings, stuck sliding yokes, or even springs or bent yokes. Excessive torque can be caused by a worn center bearing or a damaged U-joint. The vehicle may make unusual noises in the chassis system.
If you notice these signs, it’s time to take your car to a mechanic. You should check regularly, especially heavy vehicles. If you’re not sure what’s causing the noise, check your car’s transmission, engine, and rear differential. If you suspect that a driveshaft needs to be replaced, a certified mechanic can replace the driveshaft in your car.
air-compressor

Drive shaft type

Driveshafts are used in many different types of vehicles. These include four-wheel drive, front-engine rear-wheel drive, motorcycles and boats. Each type of drive shaft has its own purpose. Below is an overview of the three most common types of drive shafts:
The driveshaft is a circular, elongated shaft that transmits torque from the engine to the wheels. Drive shafts often contain many joints to compensate for changes in length or angle. Some drive shafts also include connecting shafts and internal constant velocity joints. Some also include torsional dampers, spline joints, and even prismatic joints. The most important thing about the driveshaft is that it plays a vital role in transmitting torque from the engine to the wheels.
The drive shaft needs to be both light and strong to move torque. While steel is the most commonly used material for automotive driveshafts, other materials such as aluminum, composites, and carbon fiber are also commonly used. It all depends on the purpose and size of the vehicle. Precision Manufacturing is a good source for OEM products and OEM driveshafts. So when you’re looking for a new driveshaft, keep these factors in mind when buying.
Cardan joints are another common drive shaft. A universal joint, also known as a U-joint, is a flexible coupling that allows one shaft to drive the other at an angle. This type of drive shaft allows power to be transmitted while the angle of the other shaft is constantly changing. While a gimbal is a good option, it’s not a perfect solution for all applications.
CZPT, Inc. has state-of-the-art machinery to service all types of drive shafts, from small cars to race cars. They serve a variety of needs, including racing, industry and agriculture. Whether you need a new drive shaft or a simple adjustment, the staff at CZPT can meet all your needs. You’ll be back on the road soon!

U-joint

If your car yoke or u-joint shows signs of wear, it’s time to replace them. The easiest way to replace them is to follow the steps below. Use a large flathead screwdriver to test. If you feel any movement, the U-joint is faulty. Also, inspect the bearing caps for damage or rust. If you can’t find the u-joint wrench, try checking with a flashlight.
When inspecting U-joints, make sure they are properly lubricated and lubricated. If the joint is dry or poorly lubricated, it can quickly fail and cause your car to squeak while driving. Another sign that a joint is about to fail is a sudden, excessive whine. Check your u-joints every year or so to make sure they are in proper working order.
Whether your u-joint is sealed or lubricated will depend on the make and model of your vehicle. When your vehicle is off-road, you need to install lubricable U-joints for durability and longevity. A new driveshaft or derailleur will cost more than a U-joint. Also, if you don’t have a good understanding of how to replace them, you may need to do some transmission work on your vehicle.
When replacing the U-joint on the drive shaft, be sure to choose an OEM replacement whenever possible. While you can easily repair or replace the original head, if the u-joint is not lubricated, you may need to replace it. A damaged gimbal joint can cause problems with your car’s transmission or other critical components. Replacing your car’s U-joint early can ensure its long-term performance.
Another option is to use two CV joints on the drive shaft. Using multiple CV joints on the drive shaft helps you in situations where alignment is difficult or operating angles do not match. This type of driveshaft joint is more expensive and complex than a U-joint. The disadvantages of using multiple CV joints are additional length, weight, and reduced operating angle. There are many reasons to use a U-joint on a drive shaft.
air-compressor

maintenance interval

Checking U-joints and slip joints is a critical part of routine maintenance. Most vehicles are equipped with lube fittings on the driveshaft slip joint, which should be checked and lubricated at every oil change. CZPT technicians are well-versed in axles and can easily identify a bad U-joint based on the sound of acceleration or shifting. If not repaired properly, the drive shaft can fall off, requiring expensive repairs.
Oil filters and oil changes are other parts of a vehicle’s mechanical system. To prevent rust, the oil in these parts must be replaced. The same goes for transmission. Your vehicle’s driveshaft should be inspected at least every 60,000 miles. The vehicle’s transmission and clutch should also be checked for wear. Other components that should be checked include PCV valves, oil lines and connections, spark plugs, tire bearings, steering gearboxes and brakes.
If your vehicle has a manual transmission, it is best to have it serviced by CZPT’s East Lexington experts. These services should be performed every two to four years or every 24,000 miles. For best results, refer to the owner’s manual for recommended maintenance intervals. CZPT technicians are experienced in axles and differentials. Regular maintenance of your drivetrain will keep it in good working order.

China 100% Original Diesel Fuel Drive Shaft Lock Screw 7189-003 for DP210 DP310 Pump drive shaft yoke China 100% Original Diesel Fuel Drive Shaft Lock Screw 7189-003 for DP210 DP310 Pump drive shaft yoke
editor by Cx 2023-06-16

China -CCL- CV Axle for BMW X5 (E53) 31607503537 factory lower price Front CV Joint Axle Shaft Half Drive wholesaler

Product: X5 (E53)
Calendar year: two
Vehicle Fitment: bmw
Reference NO.: CD1416, AW1510191, CD1415, BM5, 832781, AW4708, 12341375, SUMTOR Worm gearbox reducer NRV304050customized ratio with input shaft fat 2.5KG 312861, 1238, VN5455, 18341571, Substantial Effectiveness Variable Frequency Commencing 37kW 50Hp Direct Driven Screw Air Compressor with Inverter 14431, PDS7905
Dimension: OE regular
Materials: Metal
Product Amount: BM-8-
Car Product: for BMW X5 (E53)
Payment: TT.paypal.Western Union.Trade Assurance
MOQ: 4pcs
Manufacturer: CCL
Transport: Sea DHL FEDEX EMS TNT
Sample: Avialable
Quality: Large-High quality
Packing: CCL packaging
Packaging Specifics: 1. CCL, Coupling Companies tire coupling alternatively of martin PIN or EQC manufacturer package deal. 2. The customer brand name package deal. 3. The neutral bundle.
Port: HangZhou

Details Photos

Merchandise title:DRIVE SHAFT FOR BMW X5 (E53)
OEM Variety:3165713537
Dimensions:OE common
Fat:12KGS
FITTING Placement:FRONT
Brand name:CCL
Substance:55 steel
MOQ:10pcs
Guarantee:12 thirty day period
sample:yes
Package deal:ccl
Shipping and delivery time:in inventory in 7days
Products Description Utilization description Business Profile Employee appearance Certifications Merchandise packaging FAQ

air-compressor

What is a driveshaft and how much does it cost to replace one?

Your vehicle is made up of many moving parts. Knowing each part is important because a damaged driveshaft can seriously damage other parts of the car. You may not know how important your driveshaft is, but it’s important to know if you want to fix your car. In this article, we’ll discuss what a driveshaft is, what its symptoms are, and how much it costs to replace a driveshaft.

Repair damaged driveshafts

A damaged driveshaft does not allow you to turn the wheels freely. It also exposes your vehicle to higher repair costs due to damaged driveshafts. If the drive shaft breaks while the car is in motion, it may cause a crash. Also, it can significantly affect the performance of the car. If you don’t fix the problem right away, you could risk more expensive repairs. If you suspect that the drive shaft is damaged, do the following.
First, make sure the drive shaft is protected from dust, moisture, and dust. A proper driveshaft cover will prevent grease from accumulating in the driveshaft, reducing the chance of further damage. The grease will also cushion the metal-to-metal contact in the constant velocity joints. For example, hitting a soft material is better than hitting a metal wall. A damaged prop shaft can not only cause difficult cornering, but it can also cause the vehicle to vibrate, which can further damage the rest of the drivetrain.
If the driveshaft is damaged, you can choose to fix it yourself or take it to a mechanic. Typically, driveshaft repairs cost around $200 to $300. Parts and labor may vary based on your vehicle type and type of repair. These parts can cost up to $600. However, if you don’t have a mechanical background, it’s better to leave it to a professional.
If you notice that one of the two drive shafts is worn, it’s time to repair it. Worn bushings and bearings can cause the drive shaft to vibrate unnecessarily, causing it to break and cause further damage. You can also check the center bearing if there is any play in the bearing. If these symptoms occur, it is best to take your car to a mechanic as soon as possible.
air-compressor

Learn about U-joints

While most vehicles have at least one type of U-joint, there are other types available. CV joints (also known as hot rod joints) are used in a variety of applications. The minor axis is shorter than the major axis on which the U-joint is located. In both cases, the U-joints are lubricated at the factory. During servicing, the drive shaft slip joint should be lubricated.
There are two main styles of U-joints, including forged and press fit. They are usually held in place by C-clamps. Some of these U-joints have knurls or grooves. When selecting the correct fitting, be sure to measure the entire fitting. To make sure you get the correct size, you can use the size chart or check the manual for your specific model.
In addition to lubrication, the condition of the U-joint should be checked regularly. Lubricate them regularly to avoid premature failure. If you hear a clicking sound when shifting gears, the u-joint space may be misaligned. In this case, the bearing may need to be serviced. If there is insufficient grease in the bearings, the universal joint may need to be replaced.
U-joint is an important part of the automobile transmission shaft. Without them, your car would have no wheeled suspension. Without them, your vehicle will have a rickety front end and a wobbly rear end. Because cars can’t drive on ultra-flat surfaces, they need flexible driveshafts. The U-joint compensates for this by allowing it to move up and down with the suspension.
A proper inspection will determine if your u-joints are loose or worn. It should be easy to pull them out. Make sure not to pull them all the way out. Also, the bearing caps should not move. Any signs of roughness or wear would indicate a need for a new UJ. Also, it is important to note that worn UJs cannot be repaired.

Symptoms of Driveshaft Failure

One of the most common problems associated with a faulty driveshaft is difficulty turning the wheels. This severely limits your overall control over the vehicle. Fortunately, there are several symptoms that could indicate that your driveshaft is failing. You should take immediate steps to determine the cause of the problem. One of the most common causes of driveshaft failure is a weak or faulty reverse gear. Other common causes of driveshaft damage include driving too hard, getting stuck in reverse gear and differential lock.
Another sign of a failed driveshaft is unusual noise while driving. These noises are usually the result of wear on the bushings and bearings that support the drive shaft. They can also cause your car to screech or scratch when switching from drive to idle. Depending on the speed, the noise may be accompanied by vibration. When this happens, it’s time to send your vehicle in for a driveshaft replacement.
One of the most common symptoms of driveshaft failure is noticeable jitter when accelerating. This could be a sign of a loose U-joint or worn center bearing. You should thoroughly inspect your car to determine the cause of these sounds and corresponding symptoms. A certified mechanic can help you determine the cause of the noise. A damaged propshaft can severely limit the drivability of the vehicle.
Regular inspection of the drive shaft can prevent serious damage. Depending on the damage, you can replace the driveshaft for anywhere from $500 to $1,000. Depending on the severity of the damage and the level of repair, the cost will depend on the number of parts that need to be replaced. Do not drive with a bad driveshaft as it can cause a serious crash. There are several ways to avoid this problem entirely.
The first symptom to look for is a worn U-joint. If the U-joint comes loose or moves too much when trying to turn the steering wheel, the driveshaft is faulty. If you see visible rust on the bearing cap seals, you can take your car to a mechanic for a thorough inspection. A worn u-joint can also indicate a problem with the transmission.
air-compressor

The cost of replacing the drive shaft

Depending on your state and service center, a driveshaft repair can cost as little as $300 or as high as $2,000, depending on the specifics of your car. Labor costs are usually around $70. Prices for the parts themselves range from $400 to $600. Labor costs also vary by model and vehicle make. Ultimately, the decision to repair or replace the driveshaft will depend on whether you need a quick car repair or a full car repair.
Some cars have two separate driveshafts. One goes to the front and the other goes to the back. If your car has four wheel drive, you will have two. If you’re replacing the axles of an all-wheel-drive car, you’ll need a special part for each axle. Choosing the wrong one can result in more expensive repairs. Before you start shopping, you should know exactly how much it will cost.
Depending on the type of vehicle you own, a driveshaft replacement will cost between PS250 and PS500. Luxury cars can cost as much as PS400. However, for safety and the overall performance of the car, replacing the driveshaft may be a necessary repair. The cost of replacing a driveshaft depends on how long your car has been on the road and how much wear and tear it has experienced. There are some symptoms that indicate a faulty drive shaft and you should take immediate action.
Repairs can be expensive, so it’s best to hire a mechanic with experience in the field. You’ll be spending hundreds of dollars a month, but you’ll have peace of mind knowing the job will be done right. Remember that you may want to ask a friend or family member to help you. Depending on the make and model of your car, replacing the driveshaft is more expensive than replacing the parts and doing it yourself.
If you suspect that your drive shaft is damaged, be sure to fix it as soon as possible. It is not advisable to drive a car with abnormal vibration and sound for a long time. Fortunately, there are some quick ways to fix the problem and avoid costly repairs later. If you’ve noticed the symptoms above, it’s worth getting the job done. There are many signs that your driveshaft may need service, including lack of power or difficulty moving the vehicle.

China -CCL- CV Axle for BMW X5 (E53) 31607503537 factory lower price Front CV Joint Axle Shaft Half Drive wholesaler China -CCL- CV Axle for BMW X5 (E53) 31607503537 factory lower price Front CV Joint Axle Shaft Half Drive wholesaler
editor by Cx 2023-06-15

China manufacturer High Performance Cardan Shaft of SWC200e-700 drive shaft yoke

Product Description

Who we are?
HangZhou XIHU (WEST LAKE) DIS. CARDANSHAFT CO;LTD has 15 years history.;When the general manager Mr.;Rony Du graduated from the university,;he always concentrated his attention on the research and development,;production and sales of the cardan shaft.;Mr.;Rony Du and his team started from scratch,;from 1 lathe and a very small order,;step by step to grow up.;He often said to his team”We will only do 1 thing well——to make the perfect cardan shaft”.;

HangZhou XIHU (WEST LAKE) DIS. CARDANSHAFT CO.;,;LTD was founded in 2005.;The registered capital is 8 million ,;covers an area of 15 acres,; has 30 existing staff.; The company specializing in the production of SWC,; SWP cross universal coupling and drum tooth coupling.;The company with factory is located in the beautiful coast of Tai Lake –Hudai (HangZhou Economic Development Zone Hudai Industrial Park);.;

In order to become China’s leading cardan shaft one-stop solution expert supplier .;XIHU (WEST LAKE) DIS. CARDANSHAFT independent research and development of SWC light,; medium,; short,; heavy Designs cardan shaft have reached the leading domestic level.;Products not only supporting domestic large and medium-sized customers,; but also exported to the United States,; India,; Vietnam,; Laos,; Ukraine,; Russia,; Germany,; Britain and other countries and areas.;In the past 15 years,; the company has accumulated a wealth of experience,; learn from foreign advanced technology,; and to absorb and use the universal axis has been improved several times,; so that the structure is maturing,; significantly improved performance.;
  
XIHU (WEST LAKE) DIS. belief:; “Continuous innovation,; optimize the structure,; perseverance” to create a high quality of outstanding cardan shaft manufacturer.;We always adhere to the ISO9001 quality control system,; from the details to start,; standardize the production process,; and to achieve processing equipment “specialization,; numerical control” rapid increase in product quality.;This Not only won the majority of customers reputation,; but also access to peer recognition.; We continue to strive to pursue:; “for customers to create the greatest value,; for the staff to build the best platform”,; will be able to achieve customer and business mutually beneficial CZPT situation.;

Why choose us?
First,;select raw material carefully
 
The cross is the core component of cardan shaft,;so the selection of material is particularly critical.;Raw materials of the cross for light Duty Size and Medium Duty Size,;we choose the 20CrMnTi special gear steel bar from SHAGANG GROUP.;Being forged in 2500 ton friction press to ensure internal metallurgical structure,;inspecting the geometric dimensions of each part to meet the drawing requirements,;then transfer to machining,;the processes of milling,; turning,; quenching and grinding.;
 
The inspector will screen blank yoke head.;The porosity,; cracks,; slag,; etc.; do not meet the requirements of the casting foundry are all eliminated,;then doing physical and chemical analysis,; to see whether the ingredients meet the requirements,; unqualified re-elimination.;And then transferred to the quenching and tempering heat treatment,; once again check the hardness to see if meet the requirements,; qualified to be transferred to the machining process.; We control from the source of the material to ensure the supply of raw materials qualified rate of 99%.;
 
  
 Second,;advanced production equipment
 
XIHU (WEST LAKE) DIS. Company introduced four-axis linkage machining center made in ZheJiang ,; milling the keyway and flange bolt hole of the flange yoke,; The once machine-shaping ensures that the symmetry of the keyway and the position of the bolt hole are less than 0.;02mm,;which greatly improves the installation accuracy of the flange,;the 4 axis milling and drilling center holes of the cross are integrated,;to ensure that the 4 shaft symmetry and verticality are less than 0.;02mm,;the process of the journal cross assembly service life can be increased by 30%,; and the speed at 1000 rpm above the cardan shaft running smoothly and super life is crucial to the operation.;
 
We use CNC machine to lathe flange yoke and welded yoke,;CNC machine can not only ensure the accuracy of the flange connection with the mouth,; but also improve the flange surface finish.;
 
5 CZPT automatic welding machine welding spline sleeve and tube,;welded yoke and tube.;With the welding CZPT swing mechanism,; automatic lifting mechanism,; adjustment mechanism and welding CZPT cooling system,; welding machine can realize multi ring continuous welding,; each coil current and voltage can be preset,; arc starting and stopping control PLC procedures,; reliable welding quality,; the weld bead is smooth and beautiful,; to control the welding process with fixed procedures,; greatly reducing the uncertainty of human during welding,; greatly improve the welding effect.;
 
 High speed cardan shaft needs to do dynamic balance test before leaving the factory.;Unbalanced cardan shaft will produce excessive centrifugal force at high speed and reduce the service life of the bearing;the dynamic balance test can eliminate the uneven distribution of the casting weight and the mass distribution of the whole assembly;Through the experiment to achieve the design of the required balance quality,; improve the universal shaft service life.;In 2008 the company introduced 2 high-precision dynamic balance test bench,; the maximum speed can reach 4000 rev / min,; the balance of G0.;8 accuracy,; balance weight 2kg–1000kg.;
 
In order to make the paint standardization,; in 2009 the company bought 10 CZPT of clean paint room ,; the surface treatment of cardan shaft is more standardized,; paint fastness is more rugged,; staff’s working conditions improved,; exhaust of harmless treatment.;

Third,;Professional transport packaging
 
The packing of the export cardan shaft is all in the same way as the plywood wooden box,; and then it is firmly secured with the iron sheet,; so as to avoid the damage caused by the complicated situation in the long-distance transportation.; Meet the standard requirements of plywood boxes into Europe and other countries,; no matter where can successfully reach all the country’s ports.;

The following table for SWC Medium-sized Universal Shaft Parameters.; 
Type A- Welded shaft design,;with length compensation
Type B- Welded shaft design,;without length compensation
Type C- Short flanged design,;without length compensation
Type D-  Long flanged design,;without length compensation
Type E- Flanged shaft design,;with length compensation
 

type Design
Data
Item		 SWC160 SWC180 SWC200 SWC225 SWC250 SWC265 SWC285 SWC315 SWC350 SWC390 SWC440 SWC490 SWC550 SWC620
A L 740 800 900 1000 1060 1120 1270 1390 1520 1530 1690 1850 2060 2280
LV 100 100 120 140 140 140 140 140 150 170 190 190 240 250
M(kg); 65 83 115 152 219 260 311 432 610 804 1122 1468 2154 2830
B L 480 530 590 640 730 790 840 930 100 1571 1130 1340 1400 1520
M(kg); 44 60 85 110 160 180 226 320 440 590 820 1090 1560 2100
C L 380 420 480 500 560 600 640 720 782 860 1040 1080 1220 1360
M(kg); 35 48 66 90 130 160 189 270 355 510 780 970 1330 1865
D L 520 580 620 690 760 810 860 970 1030 1120 1230 1360 1550 1720
M(kg); 48 65 90 120 173 220 250 355 485 665 920 1240 1765 2390
E L 800 850 940 1050 1120 1180 1320 1440 1550 1710 1880 2050 2310 2540
LV 100 100 120 140 140 140 140 140 150 170 190 190 240 250
M(kg); 70 92 126 165 238 280 340 472 660 886 1230 1625 2368 3135
  Tn(kN·m); 16 22.;4 31.;5 40 63 80 90 125 180 250 355 500 710 1000
  TF(kN·m); 8 11.;2 16 20 31.;5 40 45 63 90 125 180 250 355 500
  Β(°); 15 15 15 15 15 15 15 15 15 15 15 15 15 15
  D 160 180 200 225 250 265 285 315 350 390 440 490 550 620
  Df 160 180 200 225 250 265 285 315 350 3690 440 490 550 620
  D1 137 155 170 196 218 233 245 280 310 345 390 435 492 555
  D2(H9); 100 105 120 135 150 160 170 185 210 235 255 275 320 380
  D3 108 114 140 159 168 180 194 219 245 273 299 325 402 426
  Lm 95 105 110 125 140 150 160 180 195 215 260 270 305 340
  K 16 17 18 20 25 25 27 32 35 40 42 47 50 55
  T 4 5 5 5 6 6 7 8 8 8 10 12 12 12
  N 8 8 8 8 8 8 8 10 10 10 16 16 16 16
  D 15 17 17 17 19 19 21 23 23 25 28 31 31 38
  B 20 24 32 32 40 40 40 40 50 70 80 90 100 100
  G 6.;0 7.;0 9.;0 9.;0 12.;5 12.;5 12.;5 15.;0 16.;0 18.;0 20.;0 22.;5 22.;5 25
  MI(Kg); 2.;57 3 3.;85 3.;85 5.;17 6 6.;75 8.;25 10.;6 13 18.;50 23.;75 29.;12 38.;08
  Size M14 M16 M16 M16 M18 M18 M20 M22 M22 M24 M27 M30 M30 M36
  Tightening torque(Nm); 180 270 270 270 372 372 526 710 710 906 1340 1820 1820 3170

1.; Notations:; 
L=Standard length,; or compressed length for designs with length compensation; 
LV=Length compensation; 
M=Weight; 
Tn=Nominal torque(Yield torque 50% over Tn);; 
TF=Fatigue torque,; I.; E.; Permissible torque as determined according to the fatigue strength
Under reversing loads; 
β=Maximum deflection angle; 
MI=weight per 100mm tube
2.; Millimeters are used as measurement units except where noted; 
3.; Please consult us for customizations regarding length,; length compensation and flange connections

Material: Alloy Steel
Load: Drive Shaft
Stiffness & Flexibility: Stiffness / Rigid Axle
Journal Diameter Dimensional Accuracy: IT6-IT9
Axis Shape: Straight Shaft
Shaft Shape: Hollow Axis
Customization:
Available

|

Customized Request

air-compressor

What is a driveshaft and how much does it cost to replace one?

Your vehicle is made up of many moving parts. Knowing each part is important because a damaged driveshaft can seriously damage other parts of the car. You may not know how important your driveshaft is, but it’s important to know if you want to fix your car. In this article, we’ll discuss what a driveshaft is, what its symptoms are, and how much it costs to replace a driveshaft.

Repair damaged driveshafts

A damaged driveshaft does not allow you to turn the wheels freely. It also exposes your vehicle to higher repair costs due to damaged driveshafts. If the drive shaft breaks while the car is in motion, it may cause a crash. Also, it can significantly affect the performance of the car. If you don’t fix the problem right away, you could risk more expensive repairs. If you suspect that the drive shaft is damaged, do the following.
First, make sure the drive shaft is protected from dust, moisture, and dust. A proper driveshaft cover will prevent grease from accumulating in the driveshaft, reducing the chance of further damage. The grease will also cushion the metal-to-metal contact in the constant velocity joints. For example, hitting a soft material is better than hitting a metal wall. A damaged prop shaft can not only cause difficult cornering, but it can also cause the vehicle to vibrate, which can further damage the rest of the drivetrain.
If the driveshaft is damaged, you can choose to fix it yourself or take it to a mechanic. Typically, driveshaft repairs cost around $200 to $300. Parts and labor may vary based on your vehicle type and type of repair. These parts can cost up to $600. However, if you don’t have a mechanical background, it’s better to leave it to a professional.
If you notice that one of the two drive shafts is worn, it’s time to repair it. Worn bushings and bearings can cause the drive shaft to vibrate unnecessarily, causing it to break and cause further damage. You can also check the center bearing if there is any play in the bearing. If these symptoms occur, it is best to take your car to a mechanic as soon as possible.
air-compressor

Learn about U-joints

While most vehicles have at least one type of U-joint, there are other types available. CV joints (also known as hot rod joints) are used in a variety of applications. The minor axis is shorter than the major axis on which the U-joint is located. In both cases, the U-joints are lubricated at the factory. During servicing, the drive shaft slip joint should be lubricated.
There are two main styles of U-joints, including forged and press fit. They are usually held in place by C-clamps. Some of these U-joints have knurls or grooves. When selecting the correct fitting, be sure to measure the entire fitting. To make sure you get the correct size, you can use the size chart or check the manual for your specific model.
In addition to lubrication, the condition of the U-joint should be checked regularly. Lubricate them regularly to avoid premature failure. If you hear a clicking sound when shifting gears, the u-joint space may be misaligned. In this case, the bearing may need to be serviced. If there is insufficient grease in the bearings, the universal joint may need to be replaced.
U-joint is an important part of the automobile transmission shaft. Without them, your car would have no wheeled suspension. Without them, your vehicle will have a rickety front end and a wobbly rear end. Because cars can’t drive on ultra-flat surfaces, they need flexible driveshafts. The U-joint compensates for this by allowing it to move up and down with the suspension.
A proper inspection will determine if your u-joints are loose or worn. It should be easy to pull them out. Make sure not to pull them all the way out. Also, the bearing caps should not move. Any signs of roughness or wear would indicate a need for a new UJ. Also, it is important to note that worn UJs cannot be repaired.

Symptoms of Driveshaft Failure

One of the most common problems associated with a faulty driveshaft is difficulty turning the wheels. This severely limits your overall control over the vehicle. Fortunately, there are several symptoms that could indicate that your driveshaft is failing. You should take immediate steps to determine the cause of the problem. One of the most common causes of driveshaft failure is a weak or faulty reverse gear. Other common causes of driveshaft damage include driving too hard, getting stuck in reverse gear and differential lock.
Another sign of a failed driveshaft is unusual noise while driving. These noises are usually the result of wear on the bushings and bearings that support the drive shaft. They can also cause your car to screech or scratch when switching from drive to idle. Depending on the speed, the noise may be accompanied by vibration. When this happens, it’s time to send your vehicle in for a driveshaft replacement.
One of the most common symptoms of driveshaft failure is noticeable jitter when accelerating. This could be a sign of a loose U-joint or worn center bearing. You should thoroughly inspect your car to determine the cause of these sounds and corresponding symptoms. A certified mechanic can help you determine the cause of the noise. A damaged propshaft can severely limit the drivability of the vehicle.
Regular inspection of the drive shaft can prevent serious damage. Depending on the damage, you can replace the driveshaft for anywhere from $500 to $1,000. Depending on the severity of the damage and the level of repair, the cost will depend on the number of parts that need to be replaced. Do not drive with a bad driveshaft as it can cause a serious crash. There are several ways to avoid this problem entirely.
The first symptom to look for is a worn U-joint. If the U-joint comes loose or moves too much when trying to turn the steering wheel, the driveshaft is faulty. If you see visible rust on the bearing cap seals, you can take your car to a mechanic for a thorough inspection. A worn u-joint can also indicate a problem with the transmission.
air-compressor

The cost of replacing the drive shaft

Depending on your state and service center, a driveshaft repair can cost as little as $300 or as high as $2,000, depending on the specifics of your car. Labor costs are usually around $70. Prices for the parts themselves range from $400 to $600. Labor costs also vary by model and vehicle make. Ultimately, the decision to repair or replace the driveshaft will depend on whether you need a quick car repair or a full car repair.
Some cars have two separate driveshafts. One goes to the front and the other goes to the back. If your car has four wheel drive, you will have two. If you’re replacing the axles of an all-wheel-drive car, you’ll need a special part for each axle. Choosing the wrong one can result in more expensive repairs. Before you start shopping, you should know exactly how much it will cost.
Depending on the type of vehicle you own, a driveshaft replacement will cost between PS250 and PS500. Luxury cars can cost as much as PS400. However, for safety and the overall performance of the car, replacing the driveshaft may be a necessary repair. The cost of replacing a driveshaft depends on how long your car has been on the road and how much wear and tear it has experienced. There are some symptoms that indicate a faulty drive shaft and you should take immediate action.
Repairs can be expensive, so it’s best to hire a mechanic with experience in the field. You’ll be spending hundreds of dollars a month, but you’ll have peace of mind knowing the job will be done right. Remember that you may want to ask a friend or family member to help you. Depending on the make and model of your car, replacing the driveshaft is more expensive than replacing the parts and doing it yourself.
If you suspect that your drive shaft is damaged, be sure to fix it as soon as possible. It is not advisable to drive a car with abnormal vibration and sound for a long time. Fortunately, there are some quick ways to fix the problem and avoid costly repairs later. If you’ve noticed the symptoms above, it’s worth getting the job done. There are many signs that your driveshaft may need service, including lack of power or difficulty moving the vehicle.

China manufacturer High Performance Cardan Shaft of SWC200e-700 drive shaft yoke China manufacturer High Performance Cardan Shaft of SWC200e-700 drive shaft yoke
editor by CX 2023-06-14

China Standard Custom Precision Forged Transmission Parts CNC Machining Metal Stainless Steel Spline/Rotor/Pinion Shaft with Good quality

Product Description

Custom Precision Forged Transmission Parts CNC Machining Metal Stainless Steel Spline/Rotor/Pinion Shaft

Product Description

According to Customer’s Drawings

Detailed Photos

Company Profile

Shipping

FAQ

 

Application: Machinery, Agricultural Machinery
Hardness: Hardened Tooth Surface
Manufacturing Method: Cast Gear
Toothed Portion Shape: Spur Gear
Material: Cast Steel
Transport Package: Plywood Case
Samples:
US$ 100/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

air-compressor
hollow drive shaft

Hollow driveshafts have many benefits. They are light and reduce the overall weight of the vehicle. The largest manufacturer of these components in the world is CZPT. They also offer lightweight solutions for various applications, such as high-performance axles. CZPT driveshafts are manufactured using state-of-the-art technology. They offer excellent quality at competitive prices.
The inner diameter of the hollow shaft reduces the magnitude of the internal forces, thereby reducing the amount of torque transmitted. Unlike solid shafts, hollow shafts are getting stronger. The material inside the hollow shaft is slightly lighter, which further reduces its weight and overall torque. However, this also increases its drag at high speeds. This means that in many applications hollow driveshafts are not as efficient as solid driveshafts.
A conventional hollow drive shaft consists of a first rod 14 and a second rod 14 on both sides. The first rod is connected with the second rod, and the second rod extends in the rotation direction. The two rods are then friction welded to the central area of ​​the hollow shaft. The frictional heat generated during the relative rotation helps to connect the two parts. Hollow drive shafts can be used in internal combustion engines and environmentally-friendly vehicles.
The main advantage of a hollow driveshaft is weight reduction. The splines of the hollow drive shaft can be designed to be smaller than the outside diameter of the hollow shaft, which can significantly reduce weight. Hollow shafts are also less likely to jam compared to solid shafts. Hollow driveshafts are expected to eventually occupy the world market for automotive driveshafts. Its advantages include fuel efficiency and greater flexibility compared to solid prop shafts.

Cardan shaft

Cardan shafts are a popular choice in industrial machinery. They are used to transmit power from one machine to another and are available in a variety of sizes and shapes. They are available in a variety of materials, including steel, copper, and aluminum. If you plan to install one of these shafts, it is important to know the different types of Cardan shafts available. To find the best option, browse the catalog.
Telescopic or “Cardan” prop shafts, also known as U-joints, are ideal for efficient torque transfer between the drive and output system. They are efficient, lightweight, and energy-efficient. They employ advanced methods, including finite element modeling (FEM), to ensure maximum performance, weight, and efficiency. Additionally, the Cardan shaft has an adjustable length for easy repositioning.
Another popular choice for driveshafts is the Cardan shaft, also known as a driveshaft. The purpose of the driveshaft is to transfer torque from the engine to the wheels. They are typically used in high-performance car engines. Some types are made of brass, iron, or steel and have unique surface designs. Cardan shafts are available in inclined and parallel configurations.
Single Cardan shafts are a common replacement for standard Cardan shafts, but if you are looking for dual Cardan shafts for your vehicle, you will want to choose the 1310 series. This type is great for lifted jeeps and requires a CV-compatible transfer case. Some even require axle spacers. The dual Cardan shafts are also designed for lifts, which means it’s a good choice for raising and lowering jeeps.
air-compressor

universal joint

Cardan joints are a good choice for drive shafts when operating at a constant speed. Their design allows a constant angular velocity ratio between the input and output shafts. Depending on the application, the recommended speed limit may vary depending on the operating angle, transmission power, and application. These recommendations must be based on pressure. The maximum permissible speed of the drive shaft is determined by determining the angular acceleration.
Because gimbal joints don’t require grease, they can last a long time but eventually fail. If they are poorly lubricated or dry, they can cause metal-to-metal contact. The same is true for U-joints that do not have oil filling capability. While they have a long lifespan, it can be difficult to spot warning signs that could indicate impending joint failure. To avoid this, check the drive shaft regularly.
U-joints should not exceed seventy percent of their lateral critical velocity. However, if this speed is exceeded, the part will experience unacceptable vibration, reducing its useful life. To determine the best U-joint for your application, please contact your universal joint supplier. Typically, lower speeds do not require balancing. In these cases, you should consider using a larger pitch diameter to reduce axial force.
To minimize the angular velocity and torque of the output shaft, the two joints must be in phase. Therefore, the output shaft angular displacement does not completely follow the input shaft. Instead, it will lead or lag. Figure 3 illustrates the angular velocity variation and peak displacement lead of the gimbal. The ratios are shown below. The correct torque for this application is 1360 in-Ibs.

Refurbished drive shaft

Refurbished driveshafts are a good choice for a number of reasons. They are cheaper than brand new alternatives and generally just as reliable. Driveshafts are essential to the function of any car, truck, or bus. These parts are made of hollow metal tubes. While this helps reduce weight and expense, it is vulnerable to external influences. If this happens, it may crack or bend. If the shaft suffers this type of damage, it can cause serious damage to the transmission.
A car’s driveshaft is a critical component that transmits torque from the engine to the wheels. A1 Drive Shaft is a global supplier of automotive driveshafts and related components. Their factory has the capability to refurbish and repair almost any make or model of driveshafts. Refurbished driveshafts are available for every make and model of vehicle. They can be found on the market for a variety of vehicles, including passenger cars, trucks, vans, and SUVs.
Unusual noises indicate that your driveshaft needs to be replaced. Worn U-joints and bushings can cause excessive vibration. These components cause wear on other parts of the drivetrain. If you notice any of these symptoms, please take your vehicle to the AAMCO Bay Area Center for a thorough inspection. If you suspect damage to the driveshaft, don’t wait another minute – it can be very dangerous.
air-compressor

The cost of replacing the drive shaft

The cost of replacing a driveshaft varies, but on average, this repair costs between $200 and $1,500. While this price may vary by vehicle, the cost of parts and labor is generally equal. If you do the repair yourself, you should know how much the parts and labor will cost before you start work. Some parts can be more expensive than others, so it’s a good idea to compare the cost of several locations before deciding where to go.
If you notice any of these symptoms, you should seek a repair shop immediately. If you are still not sure if the driveshaft is damaged, do not drive the car any distance until it is repaired. Symptoms to look for include lack of power, difficulty moving the car, squeaking, clanking, or vibrating when the vehicle is moving.
Parts used in drive shafts include center support bearings, slip joints, and U-joints. The price of the driveshaft varies by vehicle and may vary by model of the same year. Also, different types of driveshafts require different repair methods and are much more expensive. Overall, though, a driveshaft replacement costs between $300 and $1,300. The process may take about an hour, depending on the vehicle model.
Several factors can lead to the need to replace the drive shaft, including bearing corrosion, damaged seals, or other components. In some cases, the U-joint indicates that the drive shaft needs to be replaced. Even if the bearings and u-joints are in good condition, they will eventually break and require the replacement of the drive shaft. However, these parts are not cheap, and if a damaged driveshaft is a symptom of a bigger problem, you should take the time to replace the shaft.

China Standard Custom Precision Forged Transmission Parts CNC Machining Metal Stainless Steel Spline/Rotor/Pinion Shaft with Good quality China Standard Custom Precision Forged Transmission Parts CNC Machining Metal Stainless Steel Spline/Rotor/Pinion Shaft with Good quality
editor by CX 2023-06-13

China wholesaler Gjf Axle Assy Transmission Parts CV Joint for Outlander at 4WD 2003-2005 drive shaft assembly parts

Product Description

 

Product Description

1.We are manufacturer of cv drive shaft,cv  axle, cv joint and cv boot, we have more than 20-years experience in producing and selling auto parts.
2.We have strict quality control, the quality of our products is very good.
3.We are professional in different market around the world.
4.The reviews our customers given us are very positive, we have confidence in our products.
5.OEM/ODM is available, meet your requirements well.
6.Large warehouse, huge stocks!!! friendly for those customers who want some quantity.
7.Ship products out very fastly, we have stock.

Product Name  CV JOINT Material  42CrMo alloy steel
Car fitment  Mitsubishi Warranty  12 months 
Model  Outlander  AT 4wd 2003-2005 Place of origin  ZHangZhoug, China
Certification  SGS/TUV/ISO MOQ 4 PCS
Transportation  Express/ by sea/ by air/ by land  Delivery time  7-15 days 
OEM/ODM Yes Brand  GJF
Advantages  large stocks/ deliver fastly/ strict quality supervision Payment  L/C,T/T,western Union,Cash,PayPal 
Sample service  Depends on the situation of stock  Weight  About 9KG

Detailed Photos

 

Customer Review

 

Packaging & Shipping

 

 

FAQ

 

After-sales Service: 12 Months
Condition: New
Color: Black
Certification: CE, DIN, ISO
Type: C.V. Joint
Application Brand: Mitsubishi
Samples:
US$ 16.19/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

air-compressor

What is a drive shaft?

If you notice a clicking noise while driving, it is most likely the driveshaft. An experienced auto mechanic will be able to tell you if the noise is coming from both sides or from one side. If it only happens on one side, you should check it. If you notice noise on both sides, you should contact a mechanic. In either case, a replacement driveshaft should be easy to find.

The drive shaft is a mechanical part

A driveshaft is a mechanical device that transmits rotation and torque from the engine to the wheels of the vehicle. This component is essential to the operation of any driveline, as the mechanical power from the engine is transmitted to the PTO (power take-off) shaft, which hydraulically transmits that power to connected equipment. Different drive shafts contain different combinations of joints to compensate for changes in shaft length and angle. Some types of drive shafts include connecting shafts, internal constant velocity joints, and external fixed joints. They also contain anti-lock system rings and torsional dampers to prevent overloading the axle or causing the wheels to lock.
Although driveshafts are relatively light, they need to handle a lot of torque. Torque applied to the drive shaft produces torsional and shear stresses. Because they have to withstand torque, these shafts are designed to be lightweight and have little inertia or weight. Therefore, they usually have a joint, coupling or rod between the two parts. Components can also be bent to accommodate changes in the distance between them.
The drive shaft can be made from a variety of materials. The most common material for these components is steel, although alloy steels are often used for high-strength applications. Alloy steel, chromium or vanadium are other materials that can be used. The type of material used depends on the application and size of the component. In many cases, metal driveshafts are the most durable and cheapest option. Plastic shafts are used for light duty applications and have different torque levels than metal shafts.

It transfers power from the engine to the wheels

A car’s powertrain consists of an electric motor, transmission, and differential. Each section performs a specific job. In a rear-wheel drive vehicle, the power generated by the engine is transmitted to the rear tires. This arrangement improves braking and handling. The differential controls how much power each wheel receives. The torque of the engine is transferred to the wheels according to its speed.
The transmission transfers power from the engine to the wheels. It is also called “transgender”. Its job is to ensure power is delivered to the wheels. Electric cars cannot drive themselves and require a gearbox to drive forward. It also controls how much power reaches the wheels at any given moment. The transmission is the last part of the power transmission chain. Despite its many names, the transmission is the most complex component of a car’s powertrain.
The driveshaft is a long steel tube that transmits mechanical power from the transmission to the wheels. Cardan joints connect to the drive shaft and provide flexible pivot points. The differential assembly is mounted on the drive shaft, allowing the wheels to turn at different speeds. The differential allows the wheels to turn at different speeds and is very important when cornering. Axles are also important to the performance of the car.

It has a rubber boot that protects it from dust and moisture

To keep this boot in good condition, you should clean it with cold water and a rag. Never place it in the dryer or in direct sunlight. Heat can deteriorate the rubber and cause it to shrink or crack. To prolong the life of your rubber boots, apply rubber conditioner to them regularly. Indigenous peoples in the Amazon region collect latex sap from the bark of rubber trees. Then they put their feet on the fire to solidify the sap.
air-compressor

it has a U-shaped connector

The drive shaft has a U-joint that transfers rotational energy from the engine to the axle. Defective gimbal joints can cause vibrations when the vehicle is in motion. This vibration is often mistaken for a wheel balance problem. Wheel balance problems can cause the vehicle to vibrate while driving, while a U-joint failure can cause the vehicle to vibrate when decelerating and accelerating, and stop when the vehicle is stopped.
The drive shaft is connected to the transmission and differential using a U-joint. It allows for small changes in position between the two components. This prevents the differential and transmission from remaining perfectly aligned. The U-joint also allows the drive shaft to be connected unconstrained, allowing the vehicle to move. Its main purpose is to transmit electricity. Of all types of elastic couplings, U-joints are the oldest.
Your vehicle’s U-joints should be inspected at least twice a year, and the joints should be greased. When checking the U-joint, you should hear a dull sound when changing gears. A clicking sound indicates insufficient grease in the bearing. If you hear or feel vibrations when shifting gears, you may need to service the bearings to prolong their life.

it has a slide-in tube

The telescopic design is a modern alternative to traditional driveshaft designs. This innovative design is based on an unconventional design philosophy that combines advances in material science and manufacturing processes. Therefore, they are more efficient and lighter than conventional designs. Slide-in tubes are a simple and efficient design solution for any vehicle application. Here are some of its benefits. Read on to learn why this type of shaft is ideal for many applications.
The telescopic drive shaft is an important part of the traditional automobile transmission system. These driveshafts allow linear motion of the two components, transmitting torque and rotation throughout the vehicle’s driveline. They also absorb energy if the vehicle collides. Often referred to as foldable driveshafts, their popularity is directly dependent on the evolution of the automotive industry.
air-compressor

It uses a bearing press to replace worn or damaged U-joints

A bearing press is a device that uses a rotary press mechanism to install or remove worn or damaged U-joints from a drive shaft. With this tool, you can replace worn or damaged U-joints in your car with relative ease. The first step involves placing the drive shaft in the vise. Then, use the 11/16″ socket to press the other cup in far enough to install the clips. If the cups don’t fit, you can use a bearing press to remove them and repeat the process. After removing the U-joint, use a grease nipple Make sure the new grease nipple is installed correctly.
Worn or damaged U-joints are a major source of driveshaft failure. If one of them were damaged or damaged, the entire driveshaft could dislocate and the car would lose power. Unless you have a professional mechanic doing the repairs, you will have to replace the entire driveshaft. Fortunately, there are many ways to do this yourself.
If any of these warning signs appear on your vehicle, you should consider replacing the damaged or worn U-joint. Common symptoms of damaged U-joints include rattling or periodic squeaking when moving, rattling when shifting, wobbling when turning, or rusted oil seals. If you notice any of these symptoms, take your vehicle to a qualified mechanic for a full inspection. Neglecting to replace a worn or damaged u-joint on the driveshaft can result in expensive and dangerous repairs and can cause significant damage to your vehicle.

China wholesaler Gjf Axle Assy Transmission Parts CV Joint for Outlander at 4WD 2003-2005 drive shaft assembly parts China wholesaler Gjf Axle Assy Transmission Parts CV Joint for Outlander at 4WD 2003-2005 drive shaft assembly parts
editor by CX 2023-06-12

China Good quality Auto Joint Excavator Machine CV Joint for Automotive Construction Machinery drive shaft coupler

Product Description

Product Description

We can supply under universal Joint for European Vehicles:

Catalogue of Universal Joint for European Vehicles
Item Number D mm O mm L mm Quantity Per Carton(PCS)
GU-500 23.8   61.3 100
GU-207 24   74.5 50
GU-728 35 73 106 20
GU-1000 27   81.75 40
GU-1000C 27   81.75 40
GU-1000C 27   81.75 40
GU-1000Y 27   81.75 40
GU-1571 27 52.59   40
 22*55 22   55 100
GU-700 27   62 40
27*64 27   64 40
27*70 27   70 40
27*71 27   71 40
GU-1100 27   74.6 40
GU-1100C 27   74.6 40
GU-1100Y 27   74.6 40
GU-1780 27   80 40
GU1210(27*62) 27   62 40
28.6*92  28.6   92 40
GU-2000 30.18   106.3 40
GU-2000C 30.18   106.3 40
GU-2000Y 30.18   106.3 400
GU-2200 30.18   92 40
GU-2200C 30.18   92 40
GU-2200Y 30.18   92 40
GU-2571 32   106.3 40
GU-2300 34.92   106.3 20
GU-2500 31.25 46    
GU-2560 30 57    
GU-2600 31.25 71.4    
GU-3000 39.69   115.95 10
GU-3500 39.69   115.95 20
GU-3500A 39.69   115.95 20
GU-3800 44   126 10
GU-3810 50   152.6 6
GU-3840 44   149 10
GU-3850 39   129  
GU-3860 50   164 10
GU-4000 47.6   134.9 10
GU-4000A 47.6   134.9 10
GU-5000 49.2   154.7 10
GU7280/3 28 49   40
GU7280/4 24   74.4 100
GU-7300 38 57 100 20
GU-7301 38 57 100 20
GU-7301 BSC 38 57 100 16
TATA1210 38 57 100 20
TATA1312  46 69 120 10
42*129 42   129 10
GU-7420 30   81.7 40
GU-7430 35   96.8 40
GU-7440 38   106.1 20
GU-7460 44   124.8 10
GU-7470 42 66   10
GU-7530 45   120.4 10
GU-7560 52   133 10
GU-7600 52   147 10
GU-7610 53   135 10
GU-7620 48   126 10
GU-7630 57   152 10
GU47130 47   130 10
GU-8100 47   131 10
GU-8110 50   131 10
GU-8130 57   144 10
40*110 40   110 20
48*135 48   135 10
48*136 48   136 10
U447 42   104.5 20
GU-9730 48   116.4 10
U924 65   190 5
GU-9450 38   148 10
U948 48   161 5
U948A 48   161 5
5-12062X 48   161 5
U954 57   164 5
U954A 57   164 5
5-12072X 57   164 5
U985 65   172 5
U992 68 89 165.5 5
U995 68 117 194 5
G5-170X 23.8 35   100
G5-155X 34.9   126.1 20
G5-155X 34.9   126.1 10
G5-303X 34.9/42.8   126/148.4 10
G5-279X 47.6   134.9 10
G5-280X 49.2   154.9 6
G5-407X 49.2   178 6
G5-281X 49.2   191.9 6
G5-674X 47.6   135 10
G5-675X 49.2   154.7/157 6
G5-676X  49.2   191.7/194 6
G5-677X   49.2   178/180 6
G5-324X 49.2/71.4   191.7/209.5 5
G5-324X-1 71.4   209.5 5
G5-326X 55.5/71.4   206/209.3 5
G5-308X 55.5   206 5
EQ-240 39   118 10
EQ-246 47   140 10
GUA-01 18   47 100
GUA-03 22   54 100
GUA-04  22   55 100
GUA-05 23.8   61.3 100
GUA-07 27   70 40
GUA-08 27   74.6 40
GUA-10 30   82 40
30.18*82 30.18   82 40
GUA-11 30.2   80 40
30*80 30   80 40
GUA-12 30.2   92 40
GUA-13 30.2   106.3 40
GUA-14 32   76 40
GUA-15 34 52 90 40
GUA-17 34.9   106.3 20
GUA-18 39.68   115.95 20
GUA-21 41   118 20
GUA-22 23.8   91  
G5-4143X  36.5   108 10
G5-5177X 42.8   115 10
G5-5000X 42.8   115 10
G5-5154X 42.8/33.3 79 115 10
G5-6128X 42.8   140.4 10
W-6139X 42.8/33.3 104.5 148.4 10
G5-7126X 49.2   148.4 10
AE-7245 41.27 104.5 152 10
W-7300 49.2/41.27 104.5 148.4 10
G5-8516X 71.8   165 6
G5-8575X 71.8   165 6
G5-8105X  49.2   206.4 5
G5-9016X 71.44   209.6 5
154-20-0571 50   208 5
SPL-90X 41.27   126.1 10
SPL-90X 41.27   126.1 10
SPL-140X 49.2   138.8 10
SPL-170X 55   164 6
SPL-250X 60   163 5
5-124X 59   167.5 6
5-124X 59   167.5 6
57*172 57   172 5
G5-273X 27 62   40
G5-353X 27/27.4 50.9 81.76 40
G5-297X 30.2 52.5   40
57*152.7(1651229) 57   152.7 6
42*119.7(2518) 42   119.7 20
42*120 42   120 10
ST2055 20   55 100
ST2050 20   50 100
ST1948 19   48 100
ST1847 18   47 100
ST1638 16   38 100
ST1639 16   39 100
ST1640 16   40 100
ST1538 15   38 100
ST1539 15   39 100
ST1540 15   40 100
CZ-116 30   82.45 40
CZ-117 27   70.1 40
CZ-148 30   83 40
CZ-185 35   97.5 20
CZ-186 30.196   106.3 40
EQ-240       50
EQ-246       50
CP20RPLS 71.2/52.3   177.2/175 5
CP25PLS 71.2/52.3   214/208 5
HW1000 26.5/33.3   56.8/79.4 40

 

Our Advantages

Production Capacity: With annual output of 500,000 universal joint,there is a professional production team to deal emergency production task.

Management System: Developping active management,and constantly deepen the quality and innovation management with system,standardization and institutionalization,promoting our staff with full enthusiasm,sincere attitude and unremitting efforts to improve product quality and management stanards.All of universal joint is made as oem no.

Research and development ability: For new technologies,new materials research and pplication,pingchai set up R & D center,a group with highly qualified engineers and technicians who are in charge of product development and continue to improve.at the same time with OE customers and tertiary institutions continue to dialogue and interchange of ideas.

Quality Control:
As a manufacture of quality,we adhere to the first time to do a good job that runs through every aspect of work.Customer salisfaction is our goal,it needs the entire team to complete,our staff to achieve this goal with unremiting efforts.

Company Profile

ZheJiang CZPT Inc is located in the beautiful scenery of ZheJiang mountain city in China, we can supply a wide range of auto parts and machine and equipment, we have our own crankshaft processing plant, is a combination of industry and trade enterprises.

Auto parts included CZPT wheel and pinion, crankshaft, camshaft, cylinder head, axleshaft, cylinder liner, piston ring, clutch disc assy, V-belt, tooth belt, hydraulic brake cylinder cups, rotary shaft lip seals,Sealed beam, halogen bulb, cleaner, startor etc.

Besides auto parts, we engage in the export of equipment, machine tool, packing machine,Hardware, tools and filling machine, labeling machine, etc. It exports to almost 100 countries and regions of the world including USA, European, Southeast Asia, Russia, Hong Kong etc.

We are ready to render cordially our services to friends of industry and commerce, trade, science and technology, finance and friends of other circles throughout the world, and to become your reliable cooperative partner.

Certifications

 

After Sales Service

Our Payment terms

1) T/T:30% deposit by T/T,70% balance by T/T before shipment.
2) L/C at sight; 
 
Packing details 

In carton or various way of packing are choosable, according to different requirement;

Shipment terms

After receive deposit it can be finished within 30 days.

If you have any further queries, please don’t hesitate to contact us.

 

After-sales Service: 12 Months
Warranty: 12 Months
Condition: New
Color: Natural Color, Silver
Certification: ISO, SGS
Structure: Single
Customization:
Available

|

Customized Request

air-compressor

How to tell if your driveshaft needs replacing

What is the cause of the unbalanced drive shaft? Unstable U-joint? Your car may make clicking noises while driving. If you can hear it from both sides, it might be time to hand it over to the mechanic. If you’re not sure, read on to learn more. Fortunately, there are many ways to tell if your driveshaft needs replacing.

unbalanced

An unbalanced driveshaft can be the source of strange noises and vibrations in your vehicle. To fix this problem, you should contact a professional. You can try a number of things to fix it, including welding and adjusting the weight. The following are the most common methods. In addition to the methods above, you can use standardized weights to balance the driveshaft. These standardized weights are attached to the shaft by welders.
An unbalanced drive shaft typically produces lateral vibrations per revolution. This type of vibration is usually caused by a damaged shaft, missing counterweights, or a foreign object stuck on the drive shaft. On the other hand, torsional vibrations occur twice per revolution, and they are caused by shaft phase shifts. Finally, critical speed vibration occurs when the RPM of the drive shaft exceeds its rated capacity. If you suspect a driveshaft problem, check the following:
Manually adjusting the imbalance of a drive shaft is not the easiest task. To avoid the difficulty of manual balancing, you can choose to use standardized weights. These weights are fixed on the outer circumference of the drive shaft. The operator can manually position the weight on the shaft with special tools, or use a robot. However, manual balancers have many disadvantages.

unstable

When the angular velocity of the output shaft is not constant, it is unstable. The angular velocity of the output shaft is 0.004 at ph = 29.5 and 1.9 at t = 1.9. The angular velocity of the intermediate shaft is not a problem. But when it’s unstable, the torque applied to it is too much for the machine. It might be a good idea to check the tension on the shaft.
An unstable drive shaft can cause a lot of noise and mechanical vibration. It can lead to premature shaft fatigue failure. CZPT studies the effect of shaft vibration on the rotor bearing system. They investigated the effect of flex coupling misalignment on the vibration of the rotor bearing system. They assume that the vibrational response has two components: x and y. However, this approach has limited application in many situations.
Experimental results show that the presence of cracks in the output shaft may mask the unbalanced excitation characteristics. For example, the presence of superharmonic peaks on the spectrum is characteristic of cracks. The presence of cracks in the output shaft masks unbalanced excitation characteristics that cannot be detected in the transient response of the input shaft. Figure 8 shows that the frequency of the rotor increases at critical speed and decreases as the shaft passes the natural frequency.

Unreliable

If you’re having trouble driving your car, chances are you’ve run into an unreliable driveshaft. This type of drivetrain can cause the wheels to stick or not turn at all, and also limit the overall control of the car. Whatever the reason, these issues should be resolved as soon as possible. Here are some symptoms to look for when diagnosing a driveshaft fault. Let’s take a closer look.
The first symptom you may notice is an unreliable drive shaft. You may feel vibrations, or hear noises under the vehicle. Depending on the cause, it could be a broken joint or a broken shaft. The good news is that driveshaft repairs are generally relatively inexpensive and take less time than a complete drivetrain replacement. If you’re not sure what to do, CZPT has a guide to replacing the U-connector.
One of the most common signs of an unreliable driveshaft is clanging and vibration. These sounds can be caused by worn bushings, loose U-joints, or damaged center bearings. This can cause severe vibration and noise. You can also feel these vibrations through the steering wheel or the floor. An unreliable driveshaft is a symptom of a bigger problem.
air-compressor

Unreliable U-joints

A car with an unreliable U-joint on the drive shaft can be dangerous. A bad u-joint can prevent the vehicle from driving properly and may even cause you trouble. Unreliable u-joints are cheap to replace and you should try getting parts from quality manufacturers. Unreliable U-joints can cause the car to vibrate in the chassis or gear lever. This is a sure sign that your car has been neglected in maintenance.
Replacing a U-joint is not a complicated task, but it requires special tools and a lot of elbow grease. If you don’t have the right tools, or you’re unfamiliar with mechanical terminology, it’s best to seek the help of a mechanic. A professional mechanic will be able to accurately assess the problem and propose an appropriate solution. But if you don’t feel confident enough, you can replace your own U-connector by following a few simple steps.
To ensure the vehicle’s driveshaft is not damaged, check the U-joint for wear and lubrication. If the U-joint is worn, the metal parts are likely to rub against each other, causing wear. The sooner a problem is diagnosed, the faster it can be resolved. Also, the longer you wait, the more you lose on repairs.

damaged drive shaft

The driveshaft is the part of the vehicle that connects the wheels. If the driveshaft is damaged, the wheels may stop turning and the vehicle may slow down or stop moving completely. It bears the weight of the car itself as well as the load on the road. So even a slight bend or break in the drive shaft can have dire consequences. Even a piece of loose metal can become a lethal missile if dropped from a vehicle.
If you hear a screeching noise or growl from your vehicle when shifting gears, your driveshaft may be damaged. When this happens, damage to the u-joint and excessive slack in the drive shaft can result. These conditions can further damage the drivetrain, including the front half. You should replace the driveshaft as soon as you notice any symptoms. After replacing the driveshaft, you can start looking for signs of wear.
A knocking sound is a sign of damage to the drive shaft. If you hear this sound while driving, it may be due to worn couplings, damaged propshaft bearings, or damaged U-joints. In some cases, the knocking noise can even be caused by a damaged U-joint. When this happens, you may need to replace the entire driveshaft, requiring a new one.
air-compressor

Maintenance fees

The cost of repairing a driveshaft varies widely, depending on the type and cause of the problem. A new driveshaft costs between $300 and $1,300, including labor. Repairing a damaged driveshaft can cost anywhere from $200 to $300, depending on the time required and the type of parts required. Symptoms of a damaged driveshaft include unresponsiveness, vibration, chassis noise and a stationary car.
The first thing to consider when estimating the cost of repairing a driveshaft is the type of vehicle you have. Some vehicles have more than one, and the parts used to make them may not be compatible with other cars. Even if the same car has two driveshafts, the damaged ones will cost more. Fortunately, many auto repair shops offer free quotes to repair damaged driveshafts, but be aware that such work can be complicated and expensive.

China Good quality Auto Joint Excavator Machine CV Joint for Automotive Construction Machinery drive shaft coupler China Good quality Auto Joint Excavator Machine CV Joint for Automotive Construction Machinery drive shaft coupler
editor by CX 2023-06-08

China high quality Gjf Good Quality CV Joint for Sequoia Tundra Usk45 L/R 2002- to-3-595 custom drive shaft

Product Description

 

Product Description

1.We are manufacturer of cv drive shaft,cv  axle, cv joint and cv boot, we have more than 20-years experience in producing and selling auto parts.
2.We have strict quality control, the quality of our products is very good.
3.We are professional in different market around the world.
4.The reviews our customers given us are very positive, we have confidence in our products.
5.OEM/ODM is available, meet your requirements well.
6.Large warehouse, huge stocks!!! friendly for those customers who want some quantity.
7.Ship products out very fastly, we have stock.

Product Name  CV JOINT Material  42CrMo alloy steel
Car fitment  Toyota Warranty  12 months 
Model  Sequoia/Tundra USK45 L/R 2002- Place of origin  ZHangZhoug, China
Certification  SGS/TUV/ISO MOQ 4 PCS
Transportation  Express/ by sea/ by air/ by land  Delivery time  1-7 days 
OEM/ODM Yes Brand  GJF
Advantages  large stocks/ deliver fastly/ strict quality supervision Payment  L/C,T/T,western Union,Cash,PayPal 
Sample service  Depends on the situation of stock  Weight  2-3KG

Detailed Photos

 

Customer Review

 

Packaging & Shipping

 

 

FAQ

 

After-sales Service: 12 Months
Condition: New
Color: Black
Certification: CE, DIN, ISO
Type: C.V. Joint
Application Brand: Toyota
Samples:
US$ 21.43/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

air-compressor

How to tell if your driveshaft needs replacing

What is the cause of the unbalanced drive shaft? Unstable U-joint? Your car may make clicking noises while driving. If you can hear it from both sides, it might be time to hand it over to the mechanic. If you’re not sure, read on to learn more. Fortunately, there are many ways to tell if your driveshaft needs replacing.

unbalanced

An unbalanced driveshaft can be the source of strange noises and vibrations in your vehicle. To fix this problem, you should contact a professional. You can try a number of things to fix it, including welding and adjusting the weight. The following are the most common methods. In addition to the methods above, you can use standardized weights to balance the driveshaft. These standardized weights are attached to the shaft by welders.
An unbalanced drive shaft typically produces lateral vibrations per revolution. This type of vibration is usually caused by a damaged shaft, missing counterweights, or a foreign object stuck on the drive shaft. On the other hand, torsional vibrations occur twice per revolution, and they are caused by shaft phase shifts. Finally, critical speed vibration occurs when the RPM of the drive shaft exceeds its rated capacity. If you suspect a driveshaft problem, check the following:
Manually adjusting the imbalance of a drive shaft is not the easiest task. To avoid the difficulty of manual balancing, you can choose to use standardized weights. These weights are fixed on the outer circumference of the drive shaft. The operator can manually position the weight on the shaft with special tools, or use a robot. However, manual balancers have many disadvantages.

unstable

When the angular velocity of the output shaft is not constant, it is unstable. The angular velocity of the output shaft is 0.004 at ph = 29.5 and 1.9 at t = 1.9. The angular velocity of the intermediate shaft is not a problem. But when it’s unstable, the torque applied to it is too much for the machine. It might be a good idea to check the tension on the shaft.
An unstable drive shaft can cause a lot of noise and mechanical vibration. It can lead to premature shaft fatigue failure. CZPT studies the effect of shaft vibration on the rotor bearing system. They investigated the effect of flex coupling misalignment on the vibration of the rotor bearing system. They assume that the vibrational response has two components: x and y. However, this approach has limited application in many situations.
Experimental results show that the presence of cracks in the output shaft may mask the unbalanced excitation characteristics. For example, the presence of superharmonic peaks on the spectrum is characteristic of cracks. The presence of cracks in the output shaft masks unbalanced excitation characteristics that cannot be detected in the transient response of the input shaft. Figure 8 shows that the frequency of the rotor increases at critical speed and decreases as the shaft passes the natural frequency.

Unreliable

If you’re having trouble driving your car, chances are you’ve run into an unreliable driveshaft. This type of drivetrain can cause the wheels to stick or not turn at all, and also limit the overall control of the car. Whatever the reason, these issues should be resolved as soon as possible. Here are some symptoms to look for when diagnosing a driveshaft fault. Let’s take a closer look.
The first symptom you may notice is an unreliable drive shaft. You may feel vibrations, or hear noises under the vehicle. Depending on the cause, it could be a broken joint or a broken shaft. The good news is that driveshaft repairs are generally relatively inexpensive and take less time than a complete drivetrain replacement. If you’re not sure what to do, CZPT has a guide to replacing the U-connector.
One of the most common signs of an unreliable driveshaft is clanging and vibration. These sounds can be caused by worn bushings, loose U-joints, or damaged center bearings. This can cause severe vibration and noise. You can also feel these vibrations through the steering wheel or the floor. An unreliable driveshaft is a symptom of a bigger problem.
air-compressor

Unreliable U-joints

A car with an unreliable U-joint on the drive shaft can be dangerous. A bad u-joint can prevent the vehicle from driving properly and may even cause you trouble. Unreliable u-joints are cheap to replace and you should try getting parts from quality manufacturers. Unreliable U-joints can cause the car to vibrate in the chassis or gear lever. This is a sure sign that your car has been neglected in maintenance.
Replacing a U-joint is not a complicated task, but it requires special tools and a lot of elbow grease. If you don’t have the right tools, or you’re unfamiliar with mechanical terminology, it’s best to seek the help of a mechanic. A professional mechanic will be able to accurately assess the problem and propose an appropriate solution. But if you don’t feel confident enough, you can replace your own U-connector by following a few simple steps.
To ensure the vehicle’s driveshaft is not damaged, check the U-joint for wear and lubrication. If the U-joint is worn, the metal parts are likely to rub against each other, causing wear. The sooner a problem is diagnosed, the faster it can be resolved. Also, the longer you wait, the more you lose on repairs.

damaged drive shaft

The driveshaft is the part of the vehicle that connects the wheels. If the driveshaft is damaged, the wheels may stop turning and the vehicle may slow down or stop moving completely. It bears the weight of the car itself as well as the load on the road. So even a slight bend or break in the drive shaft can have dire consequences. Even a piece of loose metal can become a lethal missile if dropped from a vehicle.
If you hear a screeching noise or growl from your vehicle when shifting gears, your driveshaft may be damaged. When this happens, damage to the u-joint and excessive slack in the drive shaft can result. These conditions can further damage the drivetrain, including the front half. You should replace the driveshaft as soon as you notice any symptoms. After replacing the driveshaft, you can start looking for signs of wear.
A knocking sound is a sign of damage to the drive shaft. If you hear this sound while driving, it may be due to worn couplings, damaged propshaft bearings, or damaged U-joints. In some cases, the knocking noise can even be caused by a damaged U-joint. When this happens, you may need to replace the entire driveshaft, requiring a new one.
air-compressor

Maintenance fees

The cost of repairing a driveshaft varies widely, depending on the type and cause of the problem. A new driveshaft costs between $300 and $1,300, including labor. Repairing a damaged driveshaft can cost anywhere from $200 to $300, depending on the time required and the type of parts required. Symptoms of a damaged driveshaft include unresponsiveness, vibration, chassis noise and a stationary car.
The first thing to consider when estimating the cost of repairing a driveshaft is the type of vehicle you have. Some vehicles have more than one, and the parts used to make them may not be compatible with other cars. Even if the same car has two driveshafts, the damaged ones will cost more. Fortunately, many auto repair shops offer free quotes to repair damaged driveshafts, but be aware that such work can be complicated and expensive.

China high quality Gjf Good Quality CV Joint for Sequoia Tundra Usk45 L/R 2002- to-3-595 custom drive shaft China high quality Gjf Good Quality CV Joint for Sequoia Tundra Usk45 L/R 2002- to-3-595 custom drive shaft
editor by CX 2023-06-07

China Standard Gjf Left and Right Outer CV Joint for Honda Rd1 Eg8 Eh9 1992- Year Ho-1-025 drive shaft adapter

Product Description

 

Product Description

1.We are manufacturer of cv drive shaft,cv  axle, cv joint and cv boot, we have more than 20-years experience in producing and selling auto parts.
2.We have strict quality control, the quality of our products is very good.
3.We are professional in different market around the world.
4.The reviews our customers given us are very positive, we have confidence in our products.
5.OEM/ODM is available, meet your requirements well.
6.Large warehouse, huge stocks!!! friendly for those customers who want some quantity.
7.Ship products out very fastly, we have stock.

Product Name  CV JOINT Material  42CrMo alloy steel
Car fitment  Honda Warranty  12 months 
Model  Civic RD1 1992- Place of origin  ZHangZhoug, China
Certification  SGS/TUV/ISO MOQ 4 PCS
Transportation  Express/ by sea/ by air/ by land  Delivery time  7-15 days 
OEM/ODM Yes Brand  GJF
Advantages  large stocks/ deliver fastly/ strict quality supervision Payment  L/C,T/T,western Union,Cash,PayPal 
Sample service  Depends on the situation of stock  Weight  About 9KG

Detailed Photos

 

Customer Review

 

Packaging & Shipping

 

 

FAQ

 

After-sales Service: 12 Months
Condition: New
Color: Black
Certification: CE, DIN, ISO
Type: C.V. Joint
Application Brand: Honda
Samples:
US$ 12.19/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

air-compressor

How to Identify a Faulty Drive Shaft

The most common problems associated with automotive driveshafts include clicking and rubbing noises. While driving, the noise from the driver’s seat is often noticeable. An experienced auto mechanic can easily identify whether the sound is coming from both sides or from one side. If you notice any of these signs, it’s time to send your car in for a proper diagnosis. Here’s a guide to determining if your car’s driveshaft is faulty:

Symptoms of Driveshaft Failure

If you’re having trouble turning your car, it’s time to check your vehicle’s driveshaft. A bad driveshaft can limit the overall control of your car, and you should fix it as soon as possible to avoid further problems. Other symptoms of a propshaft failure include strange noises from under the vehicle and difficulty shifting gears. Squeaking from under the vehicle is another sign of a faulty driveshaft.
If your driveshaft fails, your car will stop. Although the engine will still run, the wheels will not turn. You may hear strange noises from under the vehicle, but this is a rare symptom of a propshaft failure. However, you will have plenty of time to fix the problem. If you don’t hear any noise, the problem is not affecting your vehicle’s ability to move.
The most obvious signs of a driveshaft failure are dull sounds, squeaks or vibrations. If the drive shaft is unbalanced, it is likely to damage the transmission. It will require a trailer to remove it from your vehicle. Apart from that, it can also affect your car’s performance and require repairs. So if you hear these signs in your car, be sure to have it checked by a mechanic right away.

Drive shaft assembly

When designing a propshaft, the design should be based on the torque required to drive the vehicle. When this torque is too high, it can cause irreversible failure of the drive shaft. Therefore, a good drive shaft design should have a long service life. Here are some tips to help you design a good driveshaft. Some of the main components of the driveshaft are listed below.
Snap Ring: The snap ring is a removable part that secures the bearing cup assembly in the yoke cross hole. It also has a groove for locating the snap ring. Spline: A spline is a patented tubular machined element with a series of ridges that fit into the grooves of the mating piece. The bearing cup assembly consists of a shaft and end fittings.
U-joint: U-joint is required due to the angular displacement between the T-shaped housing and the pinion. This angle is especially large in raised 4x4s. The design of the U-joint must guarantee a constant rotational speed. Proper driveshaft design must account for the difference in angular velocity between the shafts. The T-bracket and output shaft are attached to the bearing caps at both ends.
air-compressor

U-joint

Your vehicle has a set of U-joints on the driveshaft. If your vehicle needs to be replaced, you can do it yourself. You will need a hammer, ratchet and socket. In order to remove the U-joint, you must first remove the bearing cup. In some cases you will need to use a hammer to remove the bearing cup, you should be careful as you don’t want to damage the drive shaft. If you cannot remove the bearing cup, you can also use a vise to press it out.
There are two types of U-joints. One is held by a yoke and the other is held by a c-clamp. A full ring is safer and ideal for vehicles that are often used off-road. In some cases, a full circle can be used to repair a c-clamp u-joint.
In addition to excessive torque, extreme loads and improper lubrication are common causes of U-joint failure. The U-joint on the driveshaft can also be damaged if the engine is modified. If you are driving a vehicle with a heavily modified engine, it is not enough to replace the OE U-joint. In this case, it is important to take the time to properly lubricate these components as needed to keep them functional.

tube yoke

QU40866 Tube Yoke is a common replacement for damaged or damaged driveshaft tubes. They are desirably made of a metallic material, such as an aluminum alloy, and include a hollow portion with a lug structure at one end. Tube yokes can be manufactured using a variety of methods, including casting and forging. A common method involves drawing solid elements and machining them into the final shape. The resulting components are less expensive to produce, especially when compared to other forms.
The tube fork has a connection point to the driveshaft tube. The lug structure provides attachment points for the gimbal. Typically, the driveshaft tube is 5 inches in diameter and the lug structure is 4 inches in diameter. The lug structure also serves as a mounting point for the drive shaft. Once installed, Tube Yoke is easy to maintain. There are two types of lug structures: one is forged tube yoke and the other is welded.
Heavy-duty series drive shafts use bearing plates to secure the yoke to the U-joint. All other dimensions are secured with external snap rings. Yokes are usually machined to accept U-bolts. For some applications, grease fittings are used. This attachment is more suitable for off-road vehicles and performance vehicles.
air-compressor

end yoke

The end yoke of the drive shaft is an integral part of the drive train. Choosing a high-quality end yoke will help ensure long-term operation and prevent premature failure. Pat’s Driveline offers a complete line of automotive end yokes for power take-offs, differentials and auxiliary equipment. They can also measure your existing parts and provide you with high quality replacements.
A U-bolt is an industrial fastener with threaded legs. When used on a driveshaft, it provides greater stability in unstable terrain. You can purchase a U-bolt kit to secure the pinion carrier to the drive shaft. U-bolts also come with lock washers and nuts. Performance cars and off-road vehicles often use this type of attachment. But before you install it, you have to make sure the yoke is machined to accept it.
End yokes can be made of aluminum or steel and are designed to provide strength. It also offers special bolt styles for various applications. CZPT’s drivetrain is also stocked with a full line of automotive flange yokes. The company also produces custom flanged yokes for many popular brands. Since the company has a comprehensive line of replacement flange yokes, it can help you transform your drivetrain from non-serviceable to serviceable.

bushing

The first step in repairing or replacing an automotive driveshaft is to replace worn or damaged bushings. These bushings are located inside the drive shaft to provide a smooth, safe ride. The shaft rotates in a rubber sleeve. If a bushing needs to be replaced, you should first check the manual for recommendations. Some of these components may also need to be replaced, such as the clutch or swingarm.

China Standard Gjf Left and Right Outer CV Joint for Honda Rd1 Eg8 Eh9 1992- Year Ho-1-025 drive shaft adapter China Standard Gjf Left and Right Outer CV Joint for Honda Rd1 Eg8 Eh9 1992- Year Ho-1-025 drive shaft adapter
editor by CX 2023-06-06

China manufacturer Machinery Motor Shaft with High Precision High Hardness Motor Shaft Series drive shaft axle

Product Description

  • Manufacturers direct all kinds of machinery motor shaft with high precision high hardness motor shaft series

Products Description

Business type Factory/manufacturer

Service

 CNC machining
Turning and milling
CNC turning
OEM parts

Material

 (1) Aluminum:AL 6061-T6,6063,7075-T
(2)Stainless steel:303,304,316L,17-4(SUS630)
(3)Steel:4140,Q235,Q345B,20#,45#
(4)Titanium:TA1,TA2/GR2,TA4/GR5,TC4,TC18
(5)Brass:C36000(HPb62),C37700(HPb59),C26800(H68)
(6)Copper, bronze, magnesium alloy, Delan, POM, acrylic, PC, etc.
Service OEM/ODM avaliable

Finish

 Sandblasting, anodizing, Blackenning, zinc/Nickl plating, Poland
Powder coating, passivation PVD plating titanium, electrogalvanization
Chrome plating, electrophoresis, QPQ
Electrochemical polishing, chrome plating, knurling, laser etching Logo
Major equipment CNC machining center (milling machine), CNC lathe, grinding machine
Cylindrical grinding machine, drilling machine, laser cutting machine
Graphic format STEP, STP, GIS, CAD, PDF, DWG, DXF and other samples
Tolerance +/-0.003mm
Surface roughness Ra0.04-0.08
Inspection Complete testing laboratory with micrometer, optical comparator, caliper vernier, CMM
Depth caliper vernier, universal protractor, clock gauge, internal Celsius gauge

Related Products

Products Description

Company Profile
SHINE MOTOR had been focused on the R&D,production and sales of micro motor shafts.We have complete productionequipments, the most accurate testing equipments and sewage treatment equipment,all production processes are completed in our factory.

Our products are used in mobile vibration motors,smart wearable devices,unmanned aerial vehicles,precision medical equipment, robots,household and office appliances, automotive motors and other fields.

All of our products are customized with the drawing or sample .The goods were exported to The U.S.Canada, The E.U.And Southeast Asia and so on more than 20 countries and regions up to now.

Best Service:We have professional personnel to operate.
We can according to your drawings or your requirements custom-made production.Best Quality:

We have a special quality inspection equipment.
Professional processing CNC turning ,CNC milling ,Stamping Injecting and surface treatment simultaneously,privide one-stop service.

Package and Shipping


1.FedEX / DHL / UPS / TNT for samples,Door to door service;
2.By sea for batch goods;
3.Customs specifying freight forwarders or negotiable shipping methods;
4.Delivery Time:20-25 Days for samples;30-35 Days for batch goods;
5.Payment Terms:T/T,L/C at sight,D/P etc.

Q:HOW DO I PALCE AN ORDER?

A:

1.Please send us your drawing or sample for quotation.We’ll quote you within 24 hours.

2.After you confirm the quotation, we’ll make sample and sent to you along with the QC check report, material certificate and heat treatment report (if needed).

3.After the sample be confirmed.We’ll start to make mass production after receive the payment.We’ll send you the production schedule and update you with the processing progress and product photo.

Q:WHAT IS YOUR MOQ?

A:Normally MOQ is 1 Pc

Q:HOU MUCH IS THE SHIPPING COST TO MY COUNTRY?

A:The fright charge depends on your location, quantity, dimension and the weight of the package.

Q:WHAT IS THE PRODUCTION CYCLE?

A:It depends on production dimension, technical requirements and quantity.10-20 days is required generally.

Q:WHAT KIND OF PAYMENT TERMS DO YOU ACCPET?

A:T/T, L/C

Q:WHAT SHIPPING METHODS DO YOU USE?

A:

1.For small quantity:DHL, EMS or other express you required.

2.For large quantity:Shipping by sea or air.

Q:IF YOU MAKE POOR QUALITY GOODS, WILL YOU REFOUND?

A:We make products in strict accordance with the drawings or samples.After production our QC team will check and inspect the products carefully to ensure we’re delivering qualified products.We have rich experience in serving overseas customers.So generally, this case doesn’t happen.But, if the case does happen, Yes, we’ll give you full refund.

 

Material: Carbon Steel, Stainless Steel
Load: Drive Shaft
Stiffness & Flexibility: Stiffness / Rigid Axle
Journal Diameter Dimensional Accuracy: IT6-IT9
Axis Shape: Straight Shaft
Shaft Shape: Real Axis
Samples:
US$ 4/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

air-compressor

How to tell if your driveshaft needs replacing

What is the cause of the unbalanced drive shaft? Unstable U-joint? Your car may make clicking noises while driving. If you can hear it from both sides, it might be time to hand it over to the mechanic. If you’re not sure, read on to learn more. Fortunately, there are many ways to tell if your driveshaft needs replacing.

unbalanced

An unbalanced driveshaft can be the source of strange noises and vibrations in your vehicle. To fix this problem, you should contact a professional. You can try a number of things to fix it, including welding and adjusting the weight. The following are the most common methods. In addition to the methods above, you can use standardized weights to balance the driveshaft. These standardized weights are attached to the shaft by welders.
An unbalanced drive shaft typically produces lateral vibrations per revolution. This type of vibration is usually caused by a damaged shaft, missing counterweights, or a foreign object stuck on the drive shaft. On the other hand, torsional vibrations occur twice per revolution, and they are caused by shaft phase shifts. Finally, critical speed vibration occurs when the RPM of the drive shaft exceeds its rated capacity. If you suspect a driveshaft problem, check the following:
Manually adjusting the imbalance of a drive shaft is not the easiest task. To avoid the difficulty of manual balancing, you can choose to use standardized weights. These weights are fixed on the outer circumference of the drive shaft. The operator can manually position the weight on the shaft with special tools, or use a robot. However, manual balancers have many disadvantages.

unstable

When the angular velocity of the output shaft is not constant, it is unstable. The angular velocity of the output shaft is 0.004 at ph = 29.5 and 1.9 at t = 1.9. The angular velocity of the intermediate shaft is not a problem. But when it’s unstable, the torque applied to it is too much for the machine. It might be a good idea to check the tension on the shaft.
An unstable drive shaft can cause a lot of noise and mechanical vibration. It can lead to premature shaft fatigue failure. CZPT studies the effect of shaft vibration on the rotor bearing system. They investigated the effect of flex coupling misalignment on the vibration of the rotor bearing system. They assume that the vibrational response has two components: x and y. However, this approach has limited application in many situations.
Experimental results show that the presence of cracks in the output shaft may mask the unbalanced excitation characteristics. For example, the presence of superharmonic peaks on the spectrum is characteristic of cracks. The presence of cracks in the output shaft masks unbalanced excitation characteristics that cannot be detected in the transient response of the input shaft. Figure 8 shows that the frequency of the rotor increases at critical speed and decreases as the shaft passes the natural frequency.

Unreliable

If you’re having trouble driving your car, chances are you’ve run into an unreliable driveshaft. This type of drivetrain can cause the wheels to stick or not turn at all, and also limit the overall control of the car. Whatever the reason, these issues should be resolved as soon as possible. Here are some symptoms to look for when diagnosing a driveshaft fault. Let’s take a closer look.
The first symptom you may notice is an unreliable drive shaft. You may feel vibrations, or hear noises under the vehicle. Depending on the cause, it could be a broken joint or a broken shaft. The good news is that driveshaft repairs are generally relatively inexpensive and take less time than a complete drivetrain replacement. If you’re not sure what to do, CZPT has a guide to replacing the U-connector.
One of the most common signs of an unreliable driveshaft is clanging and vibration. These sounds can be caused by worn bushings, loose U-joints, or damaged center bearings. This can cause severe vibration and noise. You can also feel these vibrations through the steering wheel or the floor. An unreliable driveshaft is a symptom of a bigger problem.
air-compressor

Unreliable U-joints

A car with an unreliable U-joint on the drive shaft can be dangerous. A bad u-joint can prevent the vehicle from driving properly and may even cause you trouble. Unreliable u-joints are cheap to replace and you should try getting parts from quality manufacturers. Unreliable U-joints can cause the car to vibrate in the chassis or gear lever. This is a sure sign that your car has been neglected in maintenance.
Replacing a U-joint is not a complicated task, but it requires special tools and a lot of elbow grease. If you don’t have the right tools, or you’re unfamiliar with mechanical terminology, it’s best to seek the help of a mechanic. A professional mechanic will be able to accurately assess the problem and propose an appropriate solution. But if you don’t feel confident enough, you can replace your own U-connector by following a few simple steps.
To ensure the vehicle’s driveshaft is not damaged, check the U-joint for wear and lubrication. If the U-joint is worn, the metal parts are likely to rub against each other, causing wear. The sooner a problem is diagnosed, the faster it can be resolved. Also, the longer you wait, the more you lose on repairs.

damaged drive shaft

The driveshaft is the part of the vehicle that connects the wheels. If the driveshaft is damaged, the wheels may stop turning and the vehicle may slow down or stop moving completely. It bears the weight of the car itself as well as the load on the road. So even a slight bend or break in the drive shaft can have dire consequences. Even a piece of loose metal can become a lethal missile if dropped from a vehicle.
If you hear a screeching noise or growl from your vehicle when shifting gears, your driveshaft may be damaged. When this happens, damage to the u-joint and excessive slack in the drive shaft can result. These conditions can further damage the drivetrain, including the front half. You should replace the driveshaft as soon as you notice any symptoms. After replacing the driveshaft, you can start looking for signs of wear.
A knocking sound is a sign of damage to the drive shaft. If you hear this sound while driving, it may be due to worn couplings, damaged propshaft bearings, or damaged U-joints. In some cases, the knocking noise can even be caused by a damaged U-joint. When this happens, you may need to replace the entire driveshaft, requiring a new one.
air-compressor

Maintenance fees

The cost of repairing a driveshaft varies widely, depending on the type and cause of the problem. A new driveshaft costs between $300 and $1,300, including labor. Repairing a damaged driveshaft can cost anywhere from $200 to $300, depending on the time required and the type of parts required. Symptoms of a damaged driveshaft include unresponsiveness, vibration, chassis noise and a stationary car.
The first thing to consider when estimating the cost of repairing a driveshaft is the type of vehicle you have. Some vehicles have more than one, and the parts used to make them may not be compatible with other cars. Even if the same car has two driveshafts, the damaged ones will cost more. Fortunately, many auto repair shops offer free quotes to repair damaged driveshafts, but be aware that such work can be complicated and expensive.

China manufacturer Machinery Motor Shaft with High Precision High Hardness Motor Shaft Series drive shaft axle China manufacturer Machinery Motor Shaft with High Precision High Hardness Motor Shaft Series drive shaft axle
editor by CX 2023-06-05

China Hot selling Made in China High Quality Drive Shaft for CZPT Loader with Hot selling

Product Description

High quality  Drive shaft for CZPT wheel loader H580 and H580T . All drive shaft from original supplier .
The transmission shaft is a rotating body with high rotational speed and less support, so its dynamic balance is crucial. Generally, the transmission shaft undergoes a dynamic balance test before leaving the factory and has been adjusted on the balance machine. For front engine rear wheel drive vehicles, it transmits the rotation of the transmission to the shaft of the main reducer. It can be multi joint, and the joints can be connected by universal joint.
The transmission shaft is a rotating body with high rotational speed and less support, so its dynamic balance is crucial. Generally, the transmission shaft undergoes a dynamic balance test before leaving the factory and has been adjusted on the balance machine. For front engine rear wheel drive vehicles, it transmits the rotation of the transmission to the shaft of the main reducer. It can be multi joint, and the joints can be connected by universal joint.

 

After-sales Service: 24 Hours Every Day of Technology and Parts Service
Condition: New
Color: Black
Certification: CE
Type: Universal Joint
Application Brand: Heracles
Customization:
Available

|

Customized Request

air-compressor

What is a drive shaft?

If you notice a clicking noise while driving, it is most likely the driveshaft. An experienced auto mechanic will be able to tell you if the noise is coming from both sides or from one side. If it only happens on one side, you should check it. If you notice noise on both sides, you should contact a mechanic. In either case, a replacement driveshaft should be easy to find.

The drive shaft is a mechanical part

A driveshaft is a mechanical device that transmits rotation and torque from the engine to the wheels of the vehicle. This component is essential to the operation of any driveline, as the mechanical power from the engine is transmitted to the PTO (power take-off) shaft, which hydraulically transmits that power to connected equipment. Different drive shafts contain different combinations of joints to compensate for changes in shaft length and angle. Some types of drive shafts include connecting shafts, internal constant velocity joints, and external fixed joints. They also contain anti-lock system rings and torsional dampers to prevent overloading the axle or causing the wheels to lock.
Although driveshafts are relatively light, they need to handle a lot of torque. Torque applied to the drive shaft produces torsional and shear stresses. Because they have to withstand torque, these shafts are designed to be lightweight and have little inertia or weight. Therefore, they usually have a joint, coupling or rod between the two parts. Components can also be bent to accommodate changes in the distance between them.
The drive shaft can be made from a variety of materials. The most common material for these components is steel, although alloy steels are often used for high-strength applications. Alloy steel, chromium or vanadium are other materials that can be used. The type of material used depends on the application and size of the component. In many cases, metal driveshafts are the most durable and cheapest option. Plastic shafts are used for light duty applications and have different torque levels than metal shafts.

It transfers power from the engine to the wheels

A car’s powertrain consists of an electric motor, transmission, and differential. Each section performs a specific job. In a rear-wheel drive vehicle, the power generated by the engine is transmitted to the rear tires. This arrangement improves braking and handling. The differential controls how much power each wheel receives. The torque of the engine is transferred to the wheels according to its speed.
The transmission transfers power from the engine to the wheels. It is also called “transgender”. Its job is to ensure power is delivered to the wheels. Electric cars cannot drive themselves and require a gearbox to drive forward. It also controls how much power reaches the wheels at any given moment. The transmission is the last part of the power transmission chain. Despite its many names, the transmission is the most complex component of a car’s powertrain.
The driveshaft is a long steel tube that transmits mechanical power from the transmission to the wheels. Cardan joints connect to the drive shaft and provide flexible pivot points. The differential assembly is mounted on the drive shaft, allowing the wheels to turn at different speeds. The differential allows the wheels to turn at different speeds and is very important when cornering. Axles are also important to the performance of the car.

It has a rubber boot that protects it from dust and moisture

To keep this boot in good condition, you should clean it with cold water and a rag. Never place it in the dryer or in direct sunlight. Heat can deteriorate the rubber and cause it to shrink or crack. To prolong the life of your rubber boots, apply rubber conditioner to them regularly. Indigenous peoples in the Amazon region collect latex sap from the bark of rubber trees. Then they put their feet on the fire to solidify the sap.
air-compressor

it has a U-shaped connector

The drive shaft has a U-joint that transfers rotational energy from the engine to the axle. Defective gimbal joints can cause vibrations when the vehicle is in motion. This vibration is often mistaken for a wheel balance problem. Wheel balance problems can cause the vehicle to vibrate while driving, while a U-joint failure can cause the vehicle to vibrate when decelerating and accelerating, and stop when the vehicle is stopped.
The drive shaft is connected to the transmission and differential using a U-joint. It allows for small changes in position between the two components. This prevents the differential and transmission from remaining perfectly aligned. The U-joint also allows the drive shaft to be connected unconstrained, allowing the vehicle to move. Its main purpose is to transmit electricity. Of all types of elastic couplings, U-joints are the oldest.
Your vehicle’s U-joints should be inspected at least twice a year, and the joints should be greased. When checking the U-joint, you should hear a dull sound when changing gears. A clicking sound indicates insufficient grease in the bearing. If you hear or feel vibrations when shifting gears, you may need to service the bearings to prolong their life.

it has a slide-in tube

The telescopic design is a modern alternative to traditional driveshaft designs. This innovative design is based on an unconventional design philosophy that combines advances in material science and manufacturing processes. Therefore, they are more efficient and lighter than conventional designs. Slide-in tubes are a simple and efficient design solution for any vehicle application. Here are some of its benefits. Read on to learn why this type of shaft is ideal for many applications.
The telescopic drive shaft is an important part of the traditional automobile transmission system. These driveshafts allow linear motion of the two components, transmitting torque and rotation throughout the vehicle’s driveline. They also absorb energy if the vehicle collides. Often referred to as foldable driveshafts, their popularity is directly dependent on the evolution of the automotive industry.
air-compressor

It uses a bearing press to replace worn or damaged U-joints

A bearing press is a device that uses a rotary press mechanism to install or remove worn or damaged U-joints from a drive shaft. With this tool, you can replace worn or damaged U-joints in your car with relative ease. The first step involves placing the drive shaft in the vise. Then, use the 11/16″ socket to press the other cup in far enough to install the clips. If the cups don’t fit, you can use a bearing press to remove them and repeat the process. After removing the U-joint, use a grease nipple Make sure the new grease nipple is installed correctly.
Worn or damaged U-joints are a major source of driveshaft failure. If one of them were damaged or damaged, the entire driveshaft could dislocate and the car would lose power. Unless you have a professional mechanic doing the repairs, you will have to replace the entire driveshaft. Fortunately, there are many ways to do this yourself.
If any of these warning signs appear on your vehicle, you should consider replacing the damaged or worn U-joint. Common symptoms of damaged U-joints include rattling or periodic squeaking when moving, rattling when shifting, wobbling when turning, or rusted oil seals. If you notice any of these symptoms, take your vehicle to a qualified mechanic for a full inspection. Neglecting to replace a worn or damaged u-joint on the driveshaft can result in expensive and dangerous repairs and can cause significant damage to your vehicle.

China Hot selling Made in China High Quality Drive Shaft for CZPT Loader with Hot selling China Hot selling Made in China High Quality Drive Shaft for CZPT Loader with Hot selling
editor by CX 2023-05-30