Product Description
Common faults of the automobile CV JOINTS/CARDAN SHAFT/AXLE SHAFT/HALF SHAFT:
1. Abnormal noise
When turning left and right, there is a “click” sound of metal knocking on 1 side of the wheel. The noise disappears when driving in a straight line. This is a typical failure phenomenon of the CV JOINT/CARDAN SHAFT/AXLE SHAFT/HALF SHAFT.
2. Stuck
When the vehicle is running at high speed, the wheels resonate. It belongs to the lack of lubrication inside the CV JOINT/CARDAN SHAFT/AXLE SHAFT/HALF SHAFT, and the vibration caused by wear and tear during operation.
3. Fracture
After the CV JOINT/CARDAN SHAFT/AXLE SHAFT/HALF SHAFT is worn to a certain extent, the internal bracket is broken, and the transmission function will be lost, so that the vehicle cannot move after the gear is loose and the clutch is released.
The composition of the CV JOINT/CARDAN SHAFT/AXLE SHAFT/HALF SHAFT universal joint:
The composition of the CV JOINT /CARDAN SHAFT/AXLE SHAFT/HALF SHAFT: 1. Star sleeve (inner raceway); 2. Spherical shell (outer raceway); 3. Steel ball; 4. Clamp; 5.rubber Boot; 6. bracket. CV JOINT/CARDAN SHAFT/AXLE SHAFT/HALF SHAFT constant velocity universal joints can be divided into axially non-telescopic (fixed) CV JOINT universal joints and telescopic CV JOINTS universal joints according to whether the axial direction of the CV JOINT universal joint can move.
Structurally, the internal splines on the inner surface of the star sleeve of the CV JOINT/CARDAN SHAFT/AXLE SHAFT/HALF SHAFT universal joint are connected with the transmission shaft. Its outer surface has 6 arc grooves as the inner raceway of the steel ball, and the outer raceway as the inner surface of the spherical shell. Each of the 6 raceways assembled by the star sleeve and the spherical shell is equipped with a steel ball, and the 6 steel balls are kept on the same level by the cage (CV JOINT). The power is transmitted from the transmission shaft through the steel ball and the spherical shell.
The structural feature of the telescopic CV JOINT universal joint is that the inner wall of the cylindrical shell and the outer surface of the star sleeve adopt cylindrical straight grooves, and the raceway produced by the combination of the 2 adopts steel balls. At the same time, steel balls are also installed in the holes of the CV JOINT/CARDAN SHAFT/AXLE SHAFT/HALF SHAFT. The inner hole of the star sleeve is connected with the input shaft by a spline. This configuration allows movement of the star sleeve in an axial direction corresponding to that of a simple housing.
Materials and technical requirements for main components of HDAG CV JOINTS/CARDAN SHAFT/AXLE SHAFT/HALF SHAFT universal joints:
1. CHINAMFG shell/cylindrical shell: 55#, CF53
1) High-frequency quenching of spline parts to HRC52-58
2) Intermediate frequency quenching of ball hole and ball raceway to HRC58-62
3) Dimensional accuracy and shape tolerance should meet the drawing requirements
4) There should be no cracks in the flaw detection
2. Star sleeve/cage/triple pin: 20CrMnTi
1) Carburizing and quenching – carburizing layer depth 0.7-1.2mm, quenching hardness HRC58-62
2) Dimensional accuracy and shape tolerance should meet the drawing requirements
3) There should be no cracks in the flaw detection
3. Half shaft: 40Cr
1) Carburizing and quenching – carburizing layer depth 0.7-1.2mm, quenching hardness HRC52-58
2) Dimensional accuracy and shape error meet the drawing requirements
3) There should be no cracks in the flaw detection
4. Dust cover: Neoprene CR, thermoplastic polyester elastomer TPEE
5. Clamp: stainless steel 1Cr18Ni9Ti or galvanized steel
Product description
CHINAMFG OEM 2 2 2 2 2 AUTO CV JOINT CARDAN SHAFT factory for lada BA3 UAZ GAZ VAZ
| Item Name | Auto or car CV JOINT,Universal Joint,CV JOINT INNER OUTER, DRIVE SHAFT, DRIVESHAFT,CV AXLE, JOINT SHAFT ASSEMBLY,CV AXLE JOINT SHAFT, HALF SHAFT, WHEEL BEARING HUB, WHEEL HUB BEARING, WHEEL BEARING | |||||
| OEM/REF NO. | 2 2 2 2 2 | |||||
| Car Model | For CARDAN lada BA3 UAZ GAZ VAZ | |||||
| POSITION | RH/LH/Right/ Left/ Front/Rear | |||||
| MOQ | 1 1 | , 2- | 1 | |||
| 2 | EX-BK1102OT 215215710 051 | EX-BK1102IN2 215 | ||||
| 96243578 | EX-BK1102OT-3T 215215710 051 | 215914750 | 2 | |||
| 21591475 82-20-103 | 32-1116J-k | 82-20-103 | ||||
| 32-1116J-k 2 | 2 2 | SK96257804BK 35711 | 82-20-103 | |||
| 96391553 93743422 | CV35571 96220402 | EX-BK43578 SK96257804BK | 49541-24 | -01 | -01 | -01 |
| 2 2 | 3-01 | -01 |
Reference our cv joint packing way,we have full experience to supply different brands all over the world:
Our HDAG CV JOINTS universal joint Drive shafts machining and production workshops:
Our HDAG CV JOINTS universal joint Drive shafts assemble line:
Our semi finished CV JOINT universal joint Drive shaft in stock before packing and shipment:
HDAG CV JOINTS universal joint Drive shafts pull push force and tensile testing, assemble Testing, full size tolerance testing:
I. We only do OEM, produce high precisional Auto CV JOINT,Universal Joint,Car CV JOINT INNER OUTER, DRIVE SHAFT, DRIVESHAFT,CV AXLE, JOINT SHAFT ASSEMBLY,CV AXLE JOINT SHAFT, HALF SHAFT, WHEEL BEARING HUB, WHEEL HUB BEARING, WHEEL BEARING, different with other factories
II.Quality guarantee: We promise to all of our old and new customers: ONE year guarantee or 50,E 1H0498099A/1H57111/357498099EX/357498099EV/357498099E/1J57111D
CHINAMFG :
CHINAMFG :
CHINAMFG :
CHINAMFG : 4342
CHINAMFG : 4342
CHINAMFG : 4342R20
CHINAMFG : 4346R30
CHINAMFG : 4346S50
CHINAMFG : 4346
CHINAMFG : 4347S60
CHINAMFG : 4347U90
CHINAMFG :
CHINAMFG :
CHINAMFG : 434708Z033
CHINAMFG : 434708Z037
CHINAMFG : 391571JJ10
CHINAMFG : 39157117JJ10
CHINAMFG : 3910110JJ10
CHINAMFG : 391Y10
CHINAMFG : 391M570
CHINAMFG : 391N215
CHINAMFG : 391571M311
CHINAMFG : 391571M915
CHINAMFG : 3910140Y10
CHINAMFG : 391014M570
CHINAMFG : 391014M575
CHINAMFG : 391014M771
CHINAMFG : 3910163Y10
CHINAMFG : 391016N215
391012Y175
392112Y070
391J210
CHINAMFG : 391J171
CHINAMFG : 391N275
CHINAMFG : 391J071
CHINAMFG : 391J915
CHINAMFG : 391E478
CHINAMFG : 391012J215
CHINAMFG : 391014N175
CHINAMFG : 391014N177
CHINAMFG : 391014N275
CHINAMFG : 391015J571
CHINAMFG : 391016J571
CHINAMFG : 391016J071
CHINAMFG : 391016J076
CHINAMFG : 391016J915
CHINAMFG : 39101AE415
CHINAMFG : 39101AU415
CHINAMFG : 39101AU416
CHINAMFG : 39101AW110
CHINAMFG : 39101CX116
CHINAMFG : 39101WF715
CHINAMFG : 39101WF716
3921185E
CHINAMFG : 4347Z035
CHINAMFG : 434708Z039
191498103A
191498103C
191498103CV
191498103CX
191498104C
321498103D
357498103
357498103A
357498103V
357498103X
357498350X
191498103
1K0498103
VAG :
,96396134,512395
CHINAMFG : 391V70A
CHINAMFG : 391013U505
CHINAMFG : 391014V01C
CHINAMFG : 391014V51A
CHINAMFG : 391014V70A
CHINAMFG : 392113U
96348790
CHINAMFG : 8111304
CHINAMFG : 86011
CHINAMFG : 9122833
CHINAMFG : 9163595
MAZDA : G571550X
MAZDA : G571560X
MAZDA : G565715
OPEL : 374
VAUXHALL : 571
391
MAZDA : MD1922510
MAZDA : MD1922510A
MAZDA : MD192550X
MAZDA : MD257160XB
33
A
OPEL : 374048
OPEL : 374067
OPEL : 37408
OPEL : 374118
OPEL : 374148
OPEL : 374195
OPEL : 90125876
OPEL : 90157212
OPEL : 95718734
OPEL : 9317340
OPEL : 93173430
SAAB : 4242319
A1683601872
CHINAMFG : 391KD0A
CHINAMFG : 391019Y015
CHINAMFG : 39101CNY015
CHINAMFG : 39211CN,7701349689,7701349839,7701349873
,7701351948,7701352571,7701352571
,7701498918,7701498919,7701498921
3910173N10
HONDA : 44305S04J60
HONDA : 44305S0A960
HONDA : 44305S0AN60
HONDA : 44305S2H571
HONDA : 44305S2H050
HONDA : 44305S2H950
HONDA : 44305S2H951
HONDA : 44305S2HN50
HONDA : 44305S5AJ50
HONDA : 44305S5AJ60
HONDA : 44305S5AJ61
HONDA : 44305S5AJ62
HONDA : 44305S5C950
HONDA : 44305S5CN50
HONDA : 44305S5CN51
HONDA : 44305S7B950
HONDA : 44305S7C950
HONDA : 44305SOA960
HONDA : 44305SOAN60
HONDA : 44306S0A960
HONDA : 44306S0AN60
HONDA : 44306S2H571
HONDA : 44306S2H950
HONDA : 44306S2H951
HONDA : 44306S5AJ51
HONDA : 44306S5AJ61
HONDA : 44306S5AJ62
HONDA : 44306S5C951
HONDA : 44306S5C952
HONDA : 44306S7B950
HONDA : 44306S7C950
HONDA : 44306SOA960
HONDA : 44306SOAN60
326582
FG02-25-500E
FG02-25-600D
FG02-25-600E
44305-SA2-960
39100ED00A
39101ED00A
39101ED005
44571-SH3-J01,44306-SB2-984
39211-CN000
CHINAMFG : 0K558-25-60X
3272.S5
39211-AY125
39101-AX005
39100-AX005
39101-AX000
MAZDA : M 0571 1510A
MAZDA : M 0571 1500C
MAZDA : M 0571 1500D
MAZDA : M 0571 1600A
MAZDA : M 0571 1600B
MAZDA : MD0925500A
MAZDA : MD0925600A
MAZDA : G064-25-600
MAZDA : G564-25-500A
MAZDA : G564-25-600A
MAZDA : G564-25-60X
MAZDA : GR01-25-500
MAZDA : GR01-25-50X
MAZDA : GR01-25-600
MAZDA : GR01-25-60X
MAZDA : GU01-25-500
MAZDA : GU01-25-50XA
MAZDA : GU01-25-50XC
MAZDA : GU01-25-600
MAZDA : GU01-25-60XA
MAZDA : GU01-25-60XD
HONDA : 44014-SNG-000
HONDA : 44305-SDC-A00
HONDA : 44305-SEA-000
HONDA : 44305-SNG-571
HONDA : 44306-SDC-A01
HONDA : 44306-SDE-T00
HONDA : 44306-SEA-000
HONDA : 44306-SNG-571
CHINAMFG : 39100JD24B
CHINAMFG : 39100JD52B
CHINAMFG : 39101JD24B
CHINAMFG : 39101JD52B
CHINAMFG : 39211JA00A
CHINAMFG : 39211JD22B
CHINAMFG : C9211JA00A
CHINAMFG : C9211JD22B
CHINAMFG : C92AAJA00A
CHINAMFG : C92AAJD22B
CHINAMFG : C9B11JA00A
CHINAMFG : C9BAAJA00A
MAZDA : FA8571500A
MAZDA : FA8571600B
MAZDA : FA8125600B
MAZDA : FA8225500A
MAZDA : FD8571500B
MAZDA : FD8571600A
MAZDA : FP0125500C
3272-HY
3272-KW
3273-HQ
3273-KJ
CHINAMFG : 39100-ED105
CHINAMFG : 39100-ED305
CHINAMFG : 39100-ED805
CHINAMFG : 39101-ED105
CHINAMFG : 39101-ED305
CHINAMFG : 39101-ED805
CHINAMFG : 39211-ED100
CHINAMFG : C9211-EL10A
CHINAMFG : KK38825600
CHINAMFG : 49500-25302
CHINAMFG : 49500-25310
CHINAMFG : 49500-25311
CHINAMFG : 49500-25312
CHINAMFG : 49500-25301
CHINAMFG : 49500-25302
CHINAMFG : 49500-25310
CHINAMFG : 49500-25311
CHINAMFG : 49500-25312
LAND ROVER : STC3046
40011-M5626
39100-M7270
39101-M7270
39113-M7275
39112-M7225
LAND ROVER : TDJ00571
CHINAMFG : 49500-25400
CHINAMFG : 49500-25200
CHINAMFG : 49500-25400
LAND ROVER : TDB500110
LAND ROVER : TDJ500030
39101-CA100
39211-CA100
39100-CA100
HONDA : 44305S74E01
HONDA : 44305S74E51
ROVER : GCV1123
ROVER : TFB000070
39211-AY125
39101-AX005
39100-AX005
39101-AX000
CITROEN : 3272TH
CITROEN : 3272WX
CITROEN : 3273QQ
CITROEN : 3273TT
CITROEN : 3273XR
DS : 3272QF
DS : 3272TH
DS : 3273QQ
DS : 3273TT
PEUGEOT : 3272QF
PEUGEOT : 3272TH
PEUGEOT : 3272WX
PEUGEOT : 3273QQ
PEUGEOT : 3273TT
PEUGEOT : 3273XR
39211-CG571
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| After-sales Service: | Three Years |
|---|---|
| Condition: | New |
| Color: | OEM Standard |
| Certification: | CE, ISO, ISO/Ts16949 |
| Type: | Universal Joint |
| Application Brand: | Nissan, Iveco, Toyota, Ford, Lada Mitsubishi FIAT Opel Peugeot Renault Citroen |
| Customization: |
Available
| Customized Request |
|---|
Are there any limitations or disadvantages associated with cardan shaft systems?
While cardan shaft systems offer numerous advantages, they also have some limitations and disadvantages that should be considered. Let’s explore these limitations in detail:
1. Angular Misalignment:
– Cardan shafts are designed to accommodate angular misalignment between the driving and driven components. However, excessive misalignment can lead to increased wear, vibration, and decreased efficiency. If the misalignment exceeds the recommended limits, it can put additional stress on the universal joints and other components, reducing the lifespan of the shaft and potentially causing mechanical failures.
2. Noise and Vibration:
– Cardan shaft systems can introduce noise and vibration into the equipment or vehicle. The universal joints and slip yokes in the shaft assembly can generate vibrations as they rotate, especially at high speeds. These vibrations can contribute to increased noise levels, potentially causing discomfort for passengers or affecting the performance of sensitive equipment. Proper balancing and maintenance of the shaft can help mitigate these effects, but they may still be present to some extent.
3. Maintenance and Lubrication:
– Cardan shaft systems require regular maintenance and lubrication to ensure optimal performance and longevity. The universal joints and slip yokes need to be properly lubricated to minimize friction and wear. If maintenance is neglected, the joints can wear out quickly, leading to increased vibration, noise, and potential failure. Regular inspections and lubrication are necessary to maintain the efficiency and reliability of cardan shaft systems.
4. Limited Flexibility in High-Speed Applications:
– Cardan shafts have limitations when it comes to high-speed applications. At high rotational speeds, the centrifugal forces acting on the rotating components can cause significant stress on the shaft and universal joints. This can result in increased wear, reduced lifespan, and potential failure. In such cases, alternative power transmission systems such as constant-velocity (CV) joints or direct drives may be more suitable.
5. Space and Weight Constraints:
– Cardan shaft systems require sufficient space for installation due to their length and telescopic design. In applications with limited space constraints, it may be challenging to accommodate the full length of the shaft, or modifications may be necessary to ensure proper fit. Additionally, the weight of the shaft can be a consideration, especially in applications where weight reduction is crucial. In such cases, alternative lightweight materials or drive systems may be more appropriate.
6. Cost:
– Cardan shaft systems can be relatively costly compared to other power transmission options. The complexity of their design, the need for customization, and the use of multiple components contribute to higher manufacturing and installation costs. However, it’s important to consider the overall benefits and performance of cardan shaft systems when evaluating their cost-effectiveness for specific applications.
7. Limited Misalignment Compensation:
– While cardan shafts can accommodate angular misalignment, they have limitations when it comes to compensating for other types of misalignment, such as parallel offset or axial displacement. In applications that require significant compensation for these types of misalignment, alternative power transmission systems with more advanced flexibility, such as flexible couplings or CV joints, may be more suitable.
Despite these limitations, cardan shaft systems remain widely used and offer numerous advantages in various applications. By understanding these limitations and considering the specific requirements of the application, engineers can make informed decisions regarding the suitability of cardan shaft systems or explore alternative power transmission options.
Can cardan shafts be customized for specific vehicle or equipment requirements?
Yes, cardan shafts can be customized to meet the specific requirements of different vehicles or equipment. Manufacturers offer a range of customization options to ensure that the cardan shafts are tailored to the unique needs of each application. Let’s explore how cardan shafts can be customized:
1. Length and Size:
– Cardan shafts can be manufactured in various lengths and sizes to accommodate the specific dimensions of the vehicle or equipment. Manufacturers can customize the overall length of the shaft to ensure proper alignment between the driving and driven components. Additionally, the size of the shaft, including the diameter and wall thickness, can be adjusted to meet the torque and load requirements of the application.
2. Torque Capacity:
– The torque capacity of the cardan shaft can be customized based on the power requirements of the vehicle or equipment. Manufacturers can design and manufacture the shaft with appropriate materials, dimensions, and reinforcement to ensure that it can transmit the required torque without failure or excessive deflection. Customizing the torque capacity of the shaft ensures optimal performance and reliability.
3. Connection Methods:
– Cardan shafts can be customized to accommodate different connection methods based on the specific requirements of the vehicle or equipment. Manufacturers offer various types of flanges, splines, and other connection options to ensure compatibility with the existing drivetrain components. Customizing the connection methods allows for seamless integration of the cardan shaft into the system.
4. Material Selection:
– Cardan shafts can be manufactured using different materials to suit the specific application requirements. Manufacturers consider factors such as strength, weight, corrosion resistance, and cost when selecting the material for the shaft. Common materials used for cardan shafts include steel alloys, stainless steel, and aluminum. By customizing the material selection, manufacturers can optimize the performance and durability of the shaft.
5. Balancing and Vibration Control:
– Cardan shafts can be customized with balancing techniques to minimize vibration and ensure smooth operation. Manufacturers employ dynamic balancing processes to reduce vibration caused by uneven distribution of mass. Customized balancing ensures that the shaft operates efficiently and minimizes stress on other components.
6. Protective Coatings and Finishes:
– Cardan shafts can be customized with protective coatings and finishes to enhance their resistance to corrosion, wear, and environmental factors. Manufacturers can apply coatings such as zinc plating, powder coating, or specialized coatings to prolong the lifespan of the shaft and ensure its performance in challenging operating conditions.
7. Collaboration with Manufacturers:
– Manufacturers actively engage in collaboration with customers to understand their specific vehicle or equipment requirements. They provide technical support and expertise to customize the cardan shaft accordingly. By collaborating closely with manufacturers, customers can ensure that the cardan shaft is designed and manufactured to meet their precise needs.
Overall, cardan shafts can be customized for specific vehicle or equipment requirements in terms of length, size, torque capacity, connection methods, material selection, balancing, protective coatings, and finishes. By leveraging customization options and working closely with manufacturers, engineers can obtain cardan shafts that are precisely tailored to the application’s needs, ensuring optimal performance, efficiency, and compatibility.
What is a cardan shaft and how does it function in vehicles and machinery?
A cardan shaft, also known as a propeller shaft or drive shaft, is a mechanical component used in vehicles and machinery to transmit torque and rotational power between two points that are not in line with each other. It consists of a tubular shaft with universal joints at each end, allowing for flexibility and accommodating misalignment between the driving and driven components. The cardan shaft plays a crucial role in transferring power from the engine or power source to the wheels or driven machinery. Here’s how it functions in vehicles and machinery:
1. Torque Transmission:
– In vehicles, the cardan shaft connects the transmission or gearbox to the differential, which then distributes torque to the wheels. When the engine generates rotational power, it is transmitted through the transmission to the cardan shaft. The universal joints at each end of the shaft allow for angular misalignment and compensate for variations in the suspension, axle movement, and road conditions. As the cardan shaft rotates, it transfers torque from the transmission to the differential, enabling power delivery to the wheels.
– In machinery, the cardan shaft serves a similar purpose of transmitting torque between the power source and driven components. For example, in agricultural equipment, the cardan shaft connects the tractor’s PTO (Power Take-Off) to various implements such as mowers, balers, or tillers. The rotational power from the tractor’s engine is transferred through the PTO driveline to the cardan shaft, which then transmits the torque to the driven machinery, enabling their operation.
2. Flexibility and Compensation:
– The cardan shaft’s design with universal joints provides flexibility and compensates for misalignment between the driving and driven components. The universal joints allow the shaft to bend and articulate while maintaining a continuous torque transmission. This flexibility is essential in vehicles and machinery where the driving and driven components may be at different angles or positions due to suspension movement, axle articulation, or uneven terrain. The cardan shaft absorbs these variations and ensures smooth power delivery without causing excessive stress or vibration.
3. Balancing and Vibration Control:
– Cardan shafts also contribute to balancing and vibration control in vehicles and machinery. The rotation of the shaft generates centrifugal forces, and any imbalance can result in vibration and reduced performance. To counterbalance this, cardan shafts are carefully designed and balanced to minimize vibration and provide smooth operation. Additionally, the universal joints help in absorbing minor vibrations and reducing their transmission to the vehicle or machinery.
4. Length Adjustment:
– Cardan shafts offer the advantage of adjustable length, allowing for variations in the distance between the driving and driven components. This adjustability is particularly useful in vehicles and machinery with adjustable wheelbases or variable attachment points. By adjusting the length of the cardan shaft, the driveline can be appropriately sized and positioned to accommodate different configurations, ensuring optimal power transmission efficiency.
5. Safety Features:
– Cardan shafts in vehicles and machinery often incorporate safety features to protect against mechanical failures. These may include shielding or guards to prevent contact with rotating components, such as the driveshaft or universal joints. In the event of a joint failure or excessive force, some cardan shafts may also incorporate shear pins or torque limiters to prevent damage to the driveline and protect other components from excessive loads.
In summary, a cardan shaft is a tubular component with universal joints at each end used to transmit torque and rotational power between non-aligned driving and driven components. It provides flexibility, compensates for misalignment, and enables torque transmission in vehicles and machinery. By efficiently transferring power, accommodating variations, and balancing vibrations, cardan shafts play a critical role in ensuring smooth and reliable operation in a wide range of applications.
editor by CX 2024-04-26