Product Description
Product Description
A Power Take-Off shaft (PTO shaft) is a mechanical device utilized to transmit power from a tractor or other power source to an attached implement, such as a mower, tiller, or baler. Typically situated at the rear of the tractor, the PTO shaft is driven by the tractor’s engine through the transmission.
The primary purpose of the PTO shaft is to supply a rotating power source to the implement, enabling it to carry out its intended function. To connect the implement to the PTO shaft, a universal joint is employed, allowing for movement between the tractor and the implement while maintaining a consistent power transfer.
Here is our advantages when compare to similar products from China:
1.Forged yokes make PTO shafts strong enough for usage and working;
2.Internal sizes standard to confirm installation smooth;
3.CE and ISO certificates to guarantee to quality of our goods;
4.Strong and professional package to confirm the good situation when you receive the goods.
Product Specifications
In farming, the most common way to transmit power from a tractor to an implement is by a driveline, connected to the PTO (Power Take Off) of the tractor to the IIC(Implement Input Connection). Drivelines are also commonly connected to shafts within the implement to transmit power to various mechanisms.
The following dimensions of the PTO types are available.
Type B:13/8″Z6(540 min)
Type D:13/8″Z21(1000 min)
Coupling a driveline to a PTO should be quick and simple because in normal use tractors must operate multiple implements. Consequently, yokes on the tractor-end of the driveline are fitted with a quick-disconnect system, such as push-pin or ball collar.
Specifications for a driveline, including the way it is coupled to a PTO, depend CHINAMFG the implement.
Yokes on the llc side are rarely disconnected and may be fastened by quick-lock couplings (push-pin or ball collar).
Taper pins are the most stable connection for splined shafts and are commonly used in yokes and torque limiters. Taper pins are also often used to connect internal drive shafts on drivelines that are not frequently disconnected.
Torque limiter and clutches must always be installed on the implement side of the primary driveline.
Packaging & Shipping
Company Profile
HangZhou Hanon Technology Co.,ltd is a modern enterprise specilizing in the development,production,sales and services of Agricultural Parts like PTO shaft and Gearboxes and Hydraulic parts like Cylinder , Valve ,Gearpump and motor etc..
We adhere to the principle of ” High Quality, Customers’Satisfaction”, using advanced technology and equipments to ensure all the technical standards of transmission .We follow the principle of people first , trying our best to set up a pleasant surroundings and platform of performance for each employee. So everyone can be self-consciously active to join Hanon Machinery.
FAQ
1.WHAT’S THE PAYMENT TERM?
When we quote for you,we will confirm with you the way of transaction,FOB,CIFetc.<br> For mass production goods, you need to pay 30% deposit before producing and70% balance against copy of documents.The most common way is by T/T.
2.HOW TO DELIVER THE GOODS TO US?
Usually we will ship the goods to you by sea.
3.How long is your delivery time and shipment?
30-45days
/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Type: | Pto Shaft |
|---|---|
| Usage: | Agricultural Products Processing, Farmland Infrastructure, Tillage, Harvester, Planting and Fertilization, Grain Threshing, Cleaning and Drying |
| Material: | 45cr Steel |
| Power Source: | Pto Dirven Shaft |
| Weight: | 8-15kg |
| After-sales Service: | Online Support |
| Samples: |
US$ 20/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
What maintenance practices are essential for prolonging the lifespan of cardan shafts?
Maintaining proper maintenance practices is crucial for prolonging the lifespan of cardan shafts and ensuring their optimal performance. Here are some essential maintenance practices to consider:
1. Regular Lubrication:
– Proper lubrication of the cardan shaft’s universal joints is vital for reducing friction, preventing wear, and ensuring smooth operation. Regularly lubricate the universal joints according to the manufacturer’s recommendations using the appropriate lubricant. This helps to minimize frictional losses, extend the life of the needle bearings, and maintain the efficiency of power transfer.
2. Inspection and Cleaning:
– Regular inspection and cleaning of the cardan shaft are essential for identifying any signs of wear, damage, or misalignment. Inspect the shaft for any cracks, corrosion, or excessive play in the universal joints. Clean the shaft periodically to remove dirt, debris, and contaminants that could potentially cause damage or hinder proper operation.
3. Misalignment Adjustment:
– Check for any misalignment between the driving and driven components connected by the cardan shaft. If misalignment is detected, address it promptly by adjusting the alignment or replacing any worn or damaged components. Misalignment can lead to increased stress on the shaft and its components, resulting in premature wear and reduced lifespan.
4. Balancing:
– Periodically check the balance of the cardan shaft to ensure smooth operation and minimize vibration. If any imbalance is detected, consult with a qualified technician to rebalance the shaft or replace any components that may be causing the imbalance. Balanced cardan shafts promote efficient power transfer and reduce stress on the drivetrain.
5. Torque and RPM Monitoring:
– Keep track of the torque and RPM (revolutions per minute) values during operation. Ensure that the cardan shaft is not subjected to torque levels exceeding its design capacity, as this can lead to premature failure. Similarly, avoid operating the shaft at speeds beyond its recommended RPM range. Monitoring torque and RPM helps prevent excessive stress and ensures the longevity of the shaft.
6. Periodic Replacement:
– Despite regular maintenance, cardan shafts may eventually reach the end of their service life due to normal wear and tear. Periodically assess the condition of the shaft and its components, considering factors such as mileage, operating conditions, and manufacturer recommendations. If significant wear or damage is observed, it may be necessary to replace the cardan shaft to maintain optimal performance and safety.
7. Manufacturer Guidelines:
– Always refer to the manufacturer’s guidelines and recommendations for maintenance practices specific to your cardan shaft model. Manufacturers often provide detailed instructions regarding lubrication intervals, inspection procedures, and other maintenance requirements. Adhering to these guidelines ensures that the maintenance practices align with the manufacturer’s specifications, promoting the longevity of the cardan shaft.
By following these essential maintenance practices, you can prolong the lifespan of cardan shafts, optimize their performance, and minimize the likelihood of unexpected failures. Regular maintenance not only extends the life of the cardan shaft but also contributes to the overall efficiency and reliability of the systems in which they are utilized.
Can cardan shafts be customized for specific vehicle or equipment requirements?
Yes, cardan shafts can be customized to meet the specific requirements of different vehicles or equipment. Manufacturers offer a range of customization options to ensure that the cardan shafts are tailored to the unique needs of each application. Let’s explore how cardan shafts can be customized:
1. Length and Size:
– Cardan shafts can be manufactured in various lengths and sizes to accommodate the specific dimensions of the vehicle or equipment. Manufacturers can customize the overall length of the shaft to ensure proper alignment between the driving and driven components. Additionally, the size of the shaft, including the diameter and wall thickness, can be adjusted to meet the torque and load requirements of the application.
2. Torque Capacity:
– The torque capacity of the cardan shaft can be customized based on the power requirements of the vehicle or equipment. Manufacturers can design and manufacture the shaft with appropriate materials, dimensions, and reinforcement to ensure that it can transmit the required torque without failure or excessive deflection. Customizing the torque capacity of the shaft ensures optimal performance and reliability.
3. Connection Methods:
– Cardan shafts can be customized to accommodate different connection methods based on the specific requirements of the vehicle or equipment. Manufacturers offer various types of flanges, splines, and other connection options to ensure compatibility with the existing drivetrain components. Customizing the connection methods allows for seamless integration of the cardan shaft into the system.
4. Material Selection:
– Cardan shafts can be manufactured using different materials to suit the specific application requirements. Manufacturers consider factors such as strength, weight, corrosion resistance, and cost when selecting the material for the shaft. Common materials used for cardan shafts include steel alloys, stainless steel, and aluminum. By customizing the material selection, manufacturers can optimize the performance and durability of the shaft.
5. Balancing and Vibration Control:
– Cardan shafts can be customized with balancing techniques to minimize vibration and ensure smooth operation. Manufacturers employ dynamic balancing processes to reduce vibration caused by uneven distribution of mass. Customized balancing ensures that the shaft operates efficiently and minimizes stress on other components.
6. Protective Coatings and Finishes:
– Cardan shafts can be customized with protective coatings and finishes to enhance their resistance to corrosion, wear, and environmental factors. Manufacturers can apply coatings such as zinc plating, powder coating, or specialized coatings to prolong the lifespan of the shaft and ensure its performance in challenging operating conditions.
7. Collaboration with Manufacturers:
– Manufacturers actively engage in collaboration with customers to understand their specific vehicle or equipment requirements. They provide technical support and expertise to customize the cardan shaft accordingly. By collaborating closely with manufacturers, customers can ensure that the cardan shaft is designed and manufactured to meet their precise needs.
Overall, cardan shafts can be customized for specific vehicle or equipment requirements in terms of length, size, torque capacity, connection methods, material selection, balancing, protective coatings, and finishes. By leveraging customization options and working closely with manufacturers, engineers can obtain cardan shafts that are precisely tailored to the application’s needs, ensuring optimal performance, efficiency, and compatibility.
What benefits do cardan shafts offer for different types of vehicles and equipment?
Cardan shafts, also known as propeller shafts or drive shafts, offer numerous benefits for different types of vehicles and equipment. Their versatile design and functionality make them an essential component in various applications. Here are the key benefits that cardan shafts provide for different types of vehicles and equipment:
1. Efficient Power Transmission:
– Cardan shafts ensure efficient power transmission from the engine or power source to the wheels or driven components. In vehicles, such as cars, trucks, and buses, cardan shafts transmit torque from the gearbox or transmission to the differential, enabling the wheels to rotate and propel the vehicle forward. In equipment and machinery, cardan shafts transfer rotational power from the power source, such as an engine or motor, to driven components like pumps, conveyors, or generators. By efficiently transmitting power, cardan shafts contribute to the overall performance and productivity of vehicles and equipment.
2. Flexibility and Misalignment Compensation:
– Cardan shafts offer flexibility and the ability to compensate for misalignment between the driving and driven components. This flexibility is crucial in vehicles and equipment where the engine or power source may not be directly aligned with the wheels or driven machinery. Cardan shafts incorporate universal joints at each end, allowing for angular misalignment and accommodating variations in the relative positions of the components. This feature ensures smooth power transmission, reduces stress on the drivetrain, and enhances the overall maneuverability and performance of vehicles and equipment.
3. Adaptability to Variable Configurations:
– Cardan shafts are adaptable to variable configurations and adjustable setups. In vehicles, they can accommodate changes in the wheelbase or suspension system, allowing for different vehicle sizes and configurations. For example, in trucks with multiple axles, cardan shafts can be adjusted to compensate for varying distances between the axles. In equipment and machinery, cardan shafts can be designed with telescopic sections or sliding splines, enabling length adjustment to accommodate changes in the distance between the power source and driven components. This adaptability makes cardan shafts suitable for a wide range of vehicle and equipment configurations.
4. Vibration Damping and Smooth Operation:
– Cardan shafts contribute to vibration damping and enable smooth operation in vehicles and equipment. The universal joints in cardan shafts help absorb and dampen vibrations that may arise from the power source or drivetrain. By allowing slight angular deflection and compensating for misalignment, cardan shafts reduce the transmission of vibrations to the vehicle or equipment, resulting in a smoother and more comfortable ride for passengers or operators. Additionally, the balanced design of cardan shafts minimizes vibration-induced wear and extends the lifespan of associated components.
5. Safety and Protection:
– Cardan shafts incorporate safety features to ensure the protection of both the vehicle or equipment and the operator. For example, in vehicles, cardan shafts often have shielding or guards to prevent contact with rotating components, reducing the risk of accidents or injuries. In some applications, cardan shafts may also include safety mechanisms such as shear pins or torque limiters. These features are designed to protect the shaft and other components from damage by shearing or disengaging in the event of overload or excessive torque, preventing costly repairs and downtime.
6. Suitable for Various Applications:
– Cardan shafts find applications in a wide range of vehicles and equipment across different industries. In the automotive sector, they are used in passenger cars, commercial vehicles, buses, and off-road vehicles to transmit power to the wheels. In the agricultural industry, cardan shafts connect tractors to various implements, such as mowers, balers, or tillers. In the construction and mining sectors, they are employed in machinery like excavators, loaders, and crushers to transfer power to different components. The versatility of cardan shafts makes them well-suited for various applications, providing reliable power transmission and motion.
In summary, cardan shafts offer several benefits for different types of vehicles and equipment. They ensure efficient power transmission, flexibility, and misalignment compensation, adaptability to variable configurations, vibration damping, and smooth operation. Additionally, they incorporate safety features and are suitable for a wide range of applications in automotive, agricultural, construction, and other industries. Cardan shafts play a vital role in enhancing the performance, maneuverability, and safety of vehicles and equipment, contributing to overall productivity and reliability.
editor by CX 2024-02-10
China high quality Pto Shaft Fit for Bush Hog Ath 600 and Ath 720, Ath 900, Fth 480, Fth 600, Fth 720, Mth 600, Mth 720 Series Mowers with high quality
Merchandise Description
Pto Shaft suit for Bush Hog ATH 600 and ATH 720, ATH 900, FTH 480, FTH 600, FTH 720, MTH 600, MTH 720 Sequence Mowers
Replacement PTO shaft for Finish Mowers, Tillers, Spreaders, Hay Tedders and a lot of a lot more programs.
PTO is a sequence 4, rated for 40HP it has 1-3/8″ 6 spline press pin on the two finishes for simple installment. Complete with basic safety protect, The PTO measures 43″ from stop to conclude and has an fifty eight” highest extended length.
These PTO shafts fit the adhering to Complete Mowers:
Bush Hog: ATH 600 and ATH 720, ATH 900, FTH 480, FTH 600, FTH 720, MTH 600, MTH 720 Collection Mowers
Landpride: FDR1548, FDR1560, FDR1572, FDR1648, FDR1660, FDR1672, FDR2548, FDR2560, FDR2572, AT2660, AT2672 Sequence Mowers
Kubota: BL348A, B342A Caroni TC480, TC590, TC710, TC910 with spline Input Shaft
Befco most late designs with splined input shafts, early types experienced some with clean input shaft
Curtis all Versions
Douglas all Versions
Tecma all Models
Sovema all Designs
Maschio all Designs
Phoenix all Models
Sicma all Models
1st Choice all Models
Connected items
The above are regular versions and materials.
If you have particular supporting requirements, you can personalize generation in accordance to buyer wants.
You should click below to check with us!
Software eventualities
Organization Info:
How to notify if your driveshaft demands replacing
What is the result in of the unbalanced generate shaft? Unstable U-joint? Your vehicle might make clicking noises whilst driving. If you can hear it from equally sides, it may possibly be time to hand it over to the mechanic. If you’re not confident, read through on to discover a lot more. The good news is, there are a lot of approaches to inform if your driveshaft wants changing.
unbalanced
An unbalanced driveshaft can be the supply of strange noises and vibrations in your car. To resolve this issue, you need to speak to a expert. You can try out a number of items to correct it, like welding and modifying the weight. The subsequent are the most widespread approaches. In addition to the strategies over, you can use standardized weights to balance the driveshaft. These standardized weights are connected to the shaft by welders.
An unbalanced drive shaft generally generates lateral vibrations for every revolution. This variety of vibration is generally caused by a damaged shaft, missing counterweights, or a international item trapped on the generate shaft. On the other hand, torsional vibrations occur two times for every revolution, and they are caused by shaft phase shifts. Last but not least, crucial pace vibration happens when the RPM of the generate shaft exceeds its rated potential. If you suspect a driveshaft issue, verify the following:
Manually adjusting the imbalance of a drive shaft is not the least difficult process. To stay away from the difficulty of guide balancing, you can pick to use standardized weights. These weights are fixed on the outer circumference of the drive shaft. The operator can manually position the fat on the shaft with specific equipment, or use a robot. Even so, handbook balancers have a lot of negatives.
unstable
When the angular velocity of the output shaft is not constant, it is unstable. The angular velocity of the output shaft is .004 at ph = 29.5 and 1.9 at t = 1.9. The angular velocity of the intermediate shaft is not a difficulty. But when it truly is unstable, the torque used to it is too a lot for the equipment. It may be a excellent concept to verify the stress on the shaft.
An unstable travel shaft can lead to a good deal of sounds and mechanical vibration. It can direct to premature shaft fatigue failure. CZPT research the influence of shaft vibration on the rotor bearing program. They investigated the influence of flex coupling misalignment on the vibration of the rotor bearing method. They assume that the vibrational response has two elements: x and y. Nonetheless, this method has limited application in many scenarios.
Experimental outcomes display that the existence of cracks in the output shaft may mask the unbalanced excitation qualities. For case in point, the presence of superharmonic peaks on the spectrum is characteristic of cracks. The presence of cracks in the output shaft masks unbalanced excitation characteristics that cannot be detected in the transient reaction of the input shaft. Determine 8 displays that the frequency of the rotor boosts at critical velocity and decreases as the shaft passes the normal frequency.
Unreliable
If you’re getting problems driving your automobile, chances are you have run into an unreliable driveshaft. This type of drivetrain can trigger the wheels to adhere or not turn at all, and also limit the general manage of the automobile. Whatever the cause, these concerns must be solved as shortly as possible. Listed here are some symptoms to seem for when diagnosing a driveshaft fault. Let us just take a closer seem.
The 1st symptom you might discover is an unreliable push shaft. You may possibly really feel vibrations, or hear noises underneath the motor vehicle. Based on the cause, it could be a damaged joint or a broken shaft. The good news is that driveshaft repairs are typically relatively economical and consider much less time than a full drivetrain replacement. If you happen to be not confident what to do, CZPT has a manual to replacing the U-connector.
A single of the most frequent symptoms of an unreliable driveshaft is clanging and vibration. These appears can be induced by worn bushings, unfastened U-joints, or damaged center bearings. This can lead to severe vibration and noise. You can also truly feel these vibrations by way of the steering wheel or the floor. An unreliable driveshaft is a symptom of a greater problem.
Unreliable U-joints
A vehicle with an unreliable U-joint on the drive shaft can be unsafe. A undesirable u-joint can avoid the motor vehicle from driving correctly and might even cause you difficulty. Unreliable u-joints are inexpensive to replace and you need to consider acquiring parts from good quality manufacturers. Unreliable U-joints can result in the automobile to vibrate in the chassis or equipment lever. This is a certain indicator that your auto has been neglected in upkeep.
Changing a U-joint is not a difficult process, but it demands unique instruments and a good deal of elbow grease. If you will not have the appropriate instruments, or you happen to be unfamiliar with mechanical terminology, it is best to seek out the aid of a mechanic. A specialist mechanic will be in a position to precisely evaluate the problem and propose an acceptable answer. But if you don’t truly feel self-confident adequate, you can exchange your possess U-connector by following a couple of easy steps.
To guarantee the vehicle’s driveshaft is not broken, verify the U-joint for use and lubrication. If the U-joint is worn, the metal areas are probably to rub against each other, creating put on. The quicker a dilemma is identified, the quicker it can be fixed. Also, the longer you wait, the more you shed on repairs.
ruined generate shaft
The driveshaft is the element of the automobile that connects the wheels. If the driveshaft is destroyed, the wheels could quit turning and the vehicle may possibly slow down or end relocating entirely. It bears the fat of the car itself as properly as the load on the road. So even a slight bend or break in the generate shaft can have dire implications. Even a piece of unfastened steel can grow to be a deadly missile if dropped from a motor vehicle.
If you listen to a screeching sound or growl from your automobile when shifting gears, your driveshaft might be broken. When this takes place, injury to the u-joint and excessive slack in the generate shaft can consequence. These problems can more damage the drivetrain, like the entrance fifty percent. You must replace the driveshaft as shortly as you recognize any signs and symptoms. Soon after changing the driveshaft, you can begin hunting for indicators of wear.
A knocking audio is a sign of hurt to the drive shaft. If you hear this seem whilst driving, it may be thanks to worn couplings, broken propshaft bearings, or destroyed U-joints. In some circumstances, the knocking sounds can even be induced by a broken U-joint. When this transpires, you might need to substitute the total driveshaft, demanding a new a single.
Maintenance costs
The expense of fixing a driveshaft differs extensively, based on the kind and lead to of the problem. A new driveshaft fees among $three hundred and $1,three hundred, including labor. Repairing a ruined driveshaft can cost wherever from $200 to $300, relying on the time essential and the type of elements required. Indicators of a damaged driveshaft consist of unresponsiveness, vibration, chassis sound and a stationary auto.
The initial thing to consider when estimating the cost of fixing a driveshaft is the kind of automobile you have. Some cars have far more than 1, and the parts employed to make them may not be compatible with other cars. Even if the identical car has two driveshafts, the ruined kinds will cost a lot more. Fortunately, a lot of car mend outlets offer you free of charge estimates to restore broken driveshafts, but be mindful that this kind of operate can be difficult and expensive.